The speaker setup in the doors looks spectacular! This is most definitely the best inspiration for my 91’ Toyota pickup and I’m basing my, soon to be new, setup off of yours identically!!!
To remove scratches to your window glass you need CERIUM OXIDE and diamond polishing pads. But remember to keep the glass cool. As the heat up and can crack if you are too aggressive.
I feel like all I do is come on your channel and say "damn, this looks great!", but at the risk of repeating myself for the 10th or so time...damn, this looks great! lol. Joking aside, it really does look excellent man. It's pretty incredible what the simple things can do for the overall appearance of a rig...like replacing those busted up marker lights. It's almost cathartic for me to do that on an older vehicle...even if the body looks like crap having fresh lenses on all of the lights makes such a huge difference. And the tint is perfect for the truck - not too dark or too light. What is that, 20%-30%?
I was cringing watching that back window install! I bought a new Mazda B 2000 in 1984. I bought an aftermarket window just like that and my friend and I installed it in like February with a foot of snow on the ground and 10 degrees outside. We had the opposite problem. We couldn't get the factory window out! After about an hour and a half freezing, I was ready to go get duct tape and a hammer and then we finally got it out. Laid the rope in the track and sprayed WD 40 on and no kidding, 60 seconds later, IN! I'm not even sure why I wanted to keep the window in tact!
I've been told "jewelers paste" is an easy/cheap fix, but haven't yet had the opportunity to use some. Keep up the great work! You had me with the Kei truck, but I have great memories of these old Toyotas. Buddy of mine put a small block V8 in one and is was almost undriveable in the dry, let alone on wet pavement. He didn't wreck it, but sold it to finance other projects (baby) as a result.
I use a waffle foam pad for window scratches. 50/50 toothpaste / baking soda for light scratches and 50/50 Turtle wax rubbing compound / Fast Orange with pumice for the deep stuff. Use to buff out windshield wiper scratches, works great. Your truck is really looking good there Justin.
For the yellowed reservoir--1) Rinse it thoroughly (try to get a pressure stream inside if you can) to remove the old fluid and loose stuff. 2) Cap the outlets, put some sand and soapy worder (ChrisFix) inside, and shake until all sludge is free, then rinse. 3) Fill with bleach water and let sit for a few hours. 4) Fill with hydrogen peroxide and put under a UV light light bulb overnight. Even better if you can build a box lined with aluminum foil or other reflective surface to disperse the UV light. That should get the old reservoir looking pretty close to new again. It will be more durable and look WAY better than painting it black.
I just watched a video on TH-cam where he soaked his radiator resavoir in something you can get a Home Depot and it made it look new. Really cheap and it was pretty quick.
That Classic Toy with all the work you put into it is anything but a beater you absolutely have do the exterior now repaint it in the factory color it will totally give it a full on second chance at a good life after all you work hard so your truck can have a good life Amen .you
Best thing for mild scratches is Eastwood Rhodite Glass polishing Compound using their polishing wheel (a kit) Love this refurb / build. Would you consider a rat rod type exterior finish ?
sometimes this restoration reminds me a bit of the Stephen king film "Christine" like where he puts new wiper blades on a cracked window screen ie why put new side lights on a rusty dented wing panel and why put "new" window winder mechanism in but not grease the gears it squeaks when you wound it up ?
Looking real good. I send my trk to a shop for a 3.4 swap and they shutdown and they didn’t finish my trk so it’s been sitting for almost 2yrs. Need some help on getting my trk back on the road. HELP Wanted
The videos you publish are very useful to me, but if you put the Spanish translation of your videos it would make it easier for us to understand since there are many of us who do not speak English Marcos from Guatemala greets you
Dang.. The tint to me makes the truck look a little ricey, that's just me though lol I never like seeing tint on older vehicles, still loving the build though
The speaker setup in the doors looks spectacular! This is most definitely the best inspiration for my 91’ Toyota pickup and I’m basing my, soon to be new, setup off of yours identically!!!
I also have a 91 pickup truck Toyota
To remove scratches to your window glass you need CERIUM OXIDE and diamond polishing pads.
But remember to keep the glass cool. As the heat up and can crack if you are too aggressive.
You do great work I've always done my own work
You Niemela boys can do about anything, your parents must be proud of all of you💪
Thank you!!
I knew I recognised his face and surname 🤦🏼
I love every video of this man💪🏻
I’m loving that little truck.👍🏽👍🏽👍🏽
I feel like all I do is come on your channel and say "damn, this looks great!", but at the risk of repeating myself for the 10th or so time...damn, this looks great! lol. Joking aside, it really does look excellent man. It's pretty incredible what the simple things can do for the overall appearance of a rig...like replacing those busted up marker lights. It's almost cathartic for me to do that on an older vehicle...even if the body looks like crap having fresh lenses on all of the lights makes such a huge difference. And the tint is perfect for the truck - not too dark or too light. What is that, 20%-30%?
I was cringing watching that back window install! I bought a new Mazda B 2000 in 1984. I bought an aftermarket window just like that and my friend and I installed it in like February with a foot of snow on the ground and 10 degrees outside. We had the opposite problem. We couldn't get the factory window out! After about an hour and a half freezing, I was ready to go get duct tape and a hammer and then we finally got it out. Laid the rope in the track and sprayed WD 40 on and no kidding, 60 seconds later, IN! I'm not even sure why I wanted to keep the window in tact!
tint set it of. looking good af
A master at all trades. WOW!
I've been told "jewelers paste" is an easy/cheap fix, but haven't yet had the opportunity to use some. Keep up the great work! You had me with the Kei truck, but I have great memories of these old Toyotas. Buddy of mine put a small block V8 in one and is was almost undriveable in the dry, let alone on wet pavement. He didn't wreck it, but sold it to finance other projects (baby) as a result.
Im working on an 84 and the metal piece that attaches the window to the actuator rusted out do you know what it is called or how to repair
I use a waffle foam pad for window scratches. 50/50 toothpaste / baking soda for light scratches and 50/50 Turtle wax rubbing compound / Fast Orange with pumice for the deep stuff. Use to buff out windshield wiper scratches, works great. Your truck is really looking good there Justin.
YESSSSSSSSS. I did the ones on my hold hilux limo black (5%)!!
انت اسطوره في التعديل استمر وذوقك جميل
Waiting for a kick ass bumper build!
you should make it wide body. impressive work bud !
For the yellowed reservoir--1) Rinse it thoroughly (try to get a pressure stream inside if you can) to remove the old fluid and loose stuff. 2) Cap the outlets, put some sand and soapy worder (ChrisFix) inside, and shake until all sludge is free, then rinse. 3) Fill with bleach water and let sit for a few hours. 4) Fill with hydrogen peroxide and put under a UV light light bulb overnight. Even better if you can build a box lined with aluminum foil or other reflective surface to disperse the UV light. That should get the old reservoir looking pretty close to new again. It will be more durable and look WAY better than painting it black.
I cannot wait to see this Toyota done
Potential 3.4 swap in the future? Love how this thing is coming together. I do agree with a widebody this thing would look so sick.
Agreed or 4.0 1uz
@@orlandomuniz876 1uz all the way. Or a hot 20r/22r. Sidedraft weber and all that
Man you’re literally good at everything 😂
Moisture barrier on the doors,did you forget?
i think he'd probably reassemble everything, because he also didn't place heat insulation behind dash
Good work as always!
Damn dude this is making me miss my li'l Toyota. Having that sliding back window was one of the best things with those single cabs.
Looking good bro 🔥🔥🔥
Great little truck!!!
Another great few projects knocked out. Do you mind sharing the mix ratio for window tint?
You can put black or clear nail polish on the edges of tint to keep it from pelling as fast
Dude can’t wait to see the engine going in.!!!!!
I just watched a video on TH-cam where he soaked his radiator resavoir in something you can get a Home Depot and it made it look new. Really cheap and it was pretty quick.
tried alot of solutions on my reservoir didn't do that much
That Classic Toy with all the work you put into it is anything but a beater you absolutely have do the exterior now repaint it in the factory color it will totally give it a full on second chance at a good life after all you work hard so your truck can have a good life Amen .you
Build it for drag racing that would be op🔥
This is amazing،
i suggest to painting inside mirror to black color.
I love your work man keep claim. From Libya 🇱🇾
Best thing for mild scratches is Eastwood Rhodite Glass polishing Compound using their polishing wheel (a kit)
Love this refurb / build. Would you consider a rat rod type exterior finish ?
Buena camioneta mister ,toyota buena maquina saludos de Chile sudamerica🙋♂️🇨🇱
Nice sleeper truck!
Literally waiting for which engine you can install in it. ✨
(uncooked) Rice, dishwasher tablet and some water will clean up that radiator overflow. Keep shaking the solution until the black comes off.
Your beater trucks are awesome
You can wet sand the glass with 2000 grit and a soft block to prevent ripples
The correct slurry compound for window polishing is cerium oxide get it online.
you can clean/ dip into acid that coolant reservoir to make it look new no need to paint it black.
Go for power Windows?
Lookin sweet, can’t wait to what’s coming next.
Luv it😮
Turbo 3RZ swap would be super cool. Just curious would have been easier to tint with windows out.
Use fast orange mixed with cutting compound.
Entertaining as usual.
0000 steel wool should help those windows. It's ultra fine and lightly abrasive
Not sure if you’ve driven at night yet but I highly recommend upgrading headlights man can’t see anything at night lol
Try some steel wool and chrome polish on the windows it gets most scratch’s out the glass
sometimes this restoration reminds me a bit of the Stephen king film "Christine" like where he puts new wiper blades on a cracked window screen ie why put new side lights on a rusty dented wing panel and why put "new" window winder mechanism in but not grease the gears it squeaks when you wound it up ?
I was waiting for this episode🙏
Using a glass polish and a felt pad I think would be better for polishing the windows
Maybe color sanding the window?
Those 79-83 marker lights look better on there than those old ones.
Just gonna say. Way easier to tint the windows out of the doors. You’ll have to try it next time!
You should put power windows
I smell an engine going in?!🤔😍
Smells good don’t it? 👍
Looking real good. I send my trk to a shop for a 3.4 swap and they shutdown and they didn’t finish my trk so it’s been sitting for almost 2yrs. Need some help on getting my trk back on the road. HELP Wanted
Looks good but it needs a sick paint job...
انت انسان راقي ومميز
Austin. We can't wait for 5 days again. Just make videos more quickly. People watch movies and entertainment and we are waiting for your videos 🤗
👍👍👍
You forgot to do one important thing on the truck. THE EXTERIOR!!!!!!!!!!!!!!
🤩
Top 👍
If you can feel the glass scratches with your finger nails, they won’t buff out.
The videos you publish are very useful to me, but if you put the Spanish translation of your videos it would make it easier for us to understand since there are many of us who do not speak English
Marcos from Guatemala greets you
I do believe early Corolla door handles will fit maybe 80s
😍😍😍😍😍
انها رائحة
You can bleach that reservoir fir a couple of days and turn it back to near new again
Jewlers rouge for the glass
Engine coming soon! The writing is on the wall lol. All the engines parts are coming in
You got that right!
@@austinniemela can't wait to see it come together.
sweettttt!!!
I absolutely love this build but I'm hoping your going to do the body work and at least put in primer.
*Calls it a beater then proceed to make the most luxurious looking toyota interior ever😂. Cant wait to see the final product!
Can I buy the dui dizzy from you when you get your new mechanical distributor? In Lewiston
PDR for the win!
🔥🔥😂😂
Using the wrong pads they make buffing pads for glass that almost look like sandpaper you need those
ياولد هايلوكس محمد سعد احتفلت ابها 😂
I think the next video is paint and body
Like it
انته كلامك اكثرمن عملك
❤️🌹
Dang.. The tint to me makes the truck look a little ricey, that's just me though lol I never like seeing tint on older vehicles, still loving the build though
👍🏽🇺🇸👍🏽
Please paint the outside body! Make her pretty preserved and not ratty
Followed by a diamond polish
How is your brother doing?
Craftsman niemela
🇦🇴Angola
Доброго здоров'я привіт з Одеси Україна.
🇵🇷👍🤔🧐😀😎✌️
🇮🇶♥️🌹
wow,if he doesn't paint that truck I'm done here,such a waste
This truck i believes go to 25k easily...
One thing more I also won prize I receive a message is this you bro??
Ok
I send a message.