How to Make a Turbo Manifold Jig Step by Step - Chevy Cruze LS 1.8 Project
ฝัง
- เผยแพร่เมื่อ 16 มี.ค. 2021
- How to Make a Turbo Manifold Jig Step by Step - Chevy Cruze LS 1.8 Project.
Cheap Welder to Make a Jig - amzn.to/3vzLX8o
Be sure to follow me on Facebook and Instagram...
► / matthew.chevalier
►Instagram - @matthewchevalier
🔔 Subscribe and hit the bell to support me and so you don't miss a thing!
Something to note: Keep in mind that I'm just a normal guy who loves cars. I'm not a trained mechanic, although my father was. If something interesting car wise comes up, I try to film it and upload it for entertainment and the "look at what I done" factor. Pat me on the back, or give me a "good game" pat on the butt. These videos are meant to inspire other DIYers. Working on cars can be dangerous, even life threatening, if the proper cautionary measurements aren't taken. You also run the risk of damaging your vehicle and or voiding your warranty. If for any reason you feel like the job is too big to handle, I would suggest consulting with a professional mechanic.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! - แนวปฏิบัติและการใช้ชีวิต
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
RIP loggy. You had a short, but eventful and wavy run! New manifold is gonna be way better.
This is why people love your channel man. You just have a go get 'em spirit. Work bench is a wooden crate, no drill press and drilling through thick steel anyways, learn as you go. Totally awesome!
Dude, can't wait to show how it came out! Almost finished. Just need to belt sand the flange flat. I appreciate that. I have minimal tools, but who's to say that should stop you. lol... that kind of stuff will come later, but where' the struggle in that? Hahah
Can't wait to see the end result, someday I'd like to make just a simple log manifold for my 1.4
You and me both! Log styles are pretty easy to make even with minimal fabrication skills. Once I finish this project I'll see if I can get a donor, or someone will to be a guinea pig so I can make a jig and offer some log style manifolds.
One step closer to having the manifold finished!
The post by Rosamond Perry below is a porno ad that I clicked on at work.
I am curious as to how you decided which runner was the longest?
Update: Don't know why, i'm still drunk. Keep up the awesome work bro!
Subbed and turned on bell. I love the build. Been up all night watching your whole series on her. I’m in the middle of a build right now as well
Welcome aboard! Man, that's awesome and I really appreciate it.
Built not bought is the best way
Keep it up, loving the quality of all the videos. One day hopefully soon those pistons will come in, excited to see this coming closer to being finished.
Thanks! Trying to be patient and not toss the stock pistons in. I'm sure they would hold, but the added security of forged pistons is peace of mind. More to come soon!
I am going to be doing this soon 🤘😁✌️
Nice!!!!
welds look good for some one that just picked it up not bad
I appreciate it! When you're doing it as a project, it can feel rushed at times, but trying to take my time with it and do the best I can. It'll work out great!
Thought the pistons arrived when you pulled the block out of the trunk 🙁 hopefully soon!
I wish! I made a trip to the machine shop to grab the block and he said, hold on. They just billed me for the pistons. He thought they had arrived, but they were for a different customer. So I left the engine there, then made a trip back up there after we realized they weren't in. Hopefully soon... with my luck it'll be a full year before I get them. lol
استمر مبدع
استمر مبدع
شكرا لك! من المؤكد سوف.
You drilled 12 holes Toowoomba much . Put a longer skinny cap on instead of pyrex cups for hard to reach places. Great video mate.
Thanks for the tip!
Hey man, love how you learn with us in this videos and your editing is the best i've seen from a channel of your size, keep it up you will make it!
Thanks! I really appreciate it.
I know, right? Makes me wonder why I can't edit worth shiz after years.
I don't weld at all now days. But you seen to do 👌 practice is the only way to get better. Play with the settings a bit to help you fine tune your welds. Be safe I hope the pistons come soon.
Thanks Jeff! I do alright seeing I don't do a whole lot of welding. I'll practice up before doing the final welds. I'm sure they come out okay. Thanks, and I hope they arrive soon as well. At least for the time being I can get other things done now.
Jig looks great stacked a couple stacks of dimes 🤘😁 it might be hard to finish weld a few spots but weld as much as you can then unbolt it and finish weld it in excited
Thanks! You and me both. Thanks for the tips. I'm going to weld each runner off of the manifold. The tricky part will be the collector. We'll get 'er done.
@@cmattdabrat yessir 😀 ✌️👍 Do you make logos for people by chance something single color and simple couple words
Sounds like you have your drill set to hammer action for drilling brick/concrete. That's going to cause lots of problems when trying to drill steel.
I didn't know that was a thing. I'll have to look into that.
Half Life 3 will come out before your pistons arrive 😔. Enjoying the content so far, though!
Tell me about it! Thanks. All I can do is wait and be patient.
The car wizard need one for his nova Jaguar engine
If I did this for a living, that definitely would be a possibility.
Think big !!!! That can make your Chanel to grow
@@pelecho That's true! The Cruze build will be one of many builds to come.
I have no clue how to weld but every shop in my town is charging an arm and two legs for a custom one built
I've learned how to weld over time. Started with stick in high school, learned mig in my 20's, and just now taking on tig in my late 30's early 40's. It can be done. Equipment isn't cheap, but a skill worth learning.
How much are you charging for a manifold?
I'll know more in the future once I get my build situated. I want to offer them for sale after I get some dyno numbers.
I like your instrumental choices and just the whole DIY vibes going on. We're on identical pages here with the welding and doin' stuff which is dope.
I assumed the jegs torch would be a 17 which is pretty standard, but I swear in your last vid I saw a 20 on the side which would actually be a small watercooled torch?! I even called Jegs, they had no answer lol. There's no spec anywhere on the product pages. So I scrubbed the 17 accessories kit. None of the gas lenses for the 9/20/25's seem to be any good. I noticed you have a vape, I was going to try vaping through the hose to see what kind of 'gas' pattern I get, haha. Might be better to make a custom screen somehow similar to the Furick cups. Some reviewers said they had to double up the o-rings to prevent cup wiggle if you have that issue. This is my initial order i.imgur.com/dNKfSEM.png gonna wait on pyrex cups until I decide what # torch I want to use. The HEET is methanol to mix with the flux (wouldn't want to use the flux pre-turbo anyways, back purging is best) and damn I didn't even realize you had an affiliate link I'm sorry!
but doing good man! This is really cool. DIY welding is gonna put us on that next enthusiast level. I've already been thinking of a bunch of projects, tube camera mount(like a harness bar), custom catch can, filling holes in my engine bay for the shaved look, all kinds of stuff. I kinda want to make my own muffler someday too.
and Apollo is a cool ass looking dog
Thanks! A lot of people don't really show their mistakes, or what it takes to learn welding as a skill.
The torch is a WP-26. The most affordable solution I could find for a gas lens with something large enough was this amzn.to/30Sm3P9 The cup I have is a #12 and it was a cheap $31 kit. LOL, vaping through definitely could help see the gas flow. Looks like an awesome list of stuff to get you going. The auto darkening helmet I got from Jeg's is no bueno. It will flash unless you have the tungsten completely in the weld pool, which with my unsteady hands has me sticking my tungsten... and left blind for a second lol. If you want your welds to have those nice colors, the larger the cup the better. LOL, no worries. I do have affiliate links. I should mention that cause it does help support the channel. :)
I appreciate it! I've always been about the DIY life is it's feasible. With welding, you'll find a million projects you can do with them. Repairs around the house, projects you haven't thought of before instead of buying things, you can make them.
Apollo is a sweetheart. Such a people person, smart, and LOVES his car rides. I might have to get a reaction video of him once the car is up and running lol.
@@cmattdabrat aw damn it's a 26!!! haha! thanks I'll get the 17/18/26 kit on the way instead. They do seem to have a lot better reviews than the 9/20/25's anyways.
Yeah flashing seems to be a common issue. the yeswelders can develop it over time too. Based on reviews/videos, the main things people said are better batteries, maxing out sensitivity(if it has it) and less shop lighting / closing garage doors. People also do this mod of using the clear bubble of an LED over one sensor to act as a better lens since the sensors are kinda recessed. I dunno. Hopefully mine will be ok because the true color feature seems pretty cool. but safety takes priority
Apollo sounds like a true boss! a reaction vid would be fun. thanks again
@@5PYZ3R lol! I'm new to all these torch sizes / kinds. I just know electricity and if you're lucky enough, gas comes out the other end. Hahaha
Hammer drills are for concrete not metal 😂
😍👍😍👍
Thanks Macy! I have the unboxing set for Sunday afternoon when most of my subscribers are on. :)
@@cmattdabrat can't wait to watch that!! please don't forget to add right link!haha
@@macysmith9141 LOL! Definitely wont. :)
@@macysmith9141 Y'all out here hustlin' hard. I'm working with Una!
I thing the only reason that you only have 1000 views i because you'r making this project toooooooooo long.
I thing that it souldn't exceed 6 episodes 10 at most.
you have good way to explane things but you'r going too detailed.
It's about the journey. Not the destination.