@@diyrepairs That's what i figured. Thanks. But, if the flow of pure water is already very low, does that mean you should get a higher gpd pump or the membrane or both? Like would a 100 gpd pump work on a 80 gpd membrane or do we need matching ones?
I have raw water tds more than 700 ,its bore well water which membrane and flow restrictor should i use ,pls guide me thanks I have 100gpd pump is that ok?
I don't think you really even need an NF filter for this low a TDS. You probably are getting treated water. Maybe just get a UF+UV setup to be on the safer side.
Best video regarding FR calculation.Thanks
welcome
Very informative video .thanks and god bless you 😊
Thank you , very useful information whit a simple description,,
thanks and welcome
I have a 100 gpd pump, a 80 gpd ro membrane and my water tds is 1030 what FR should I use
If i go according to your chart then i should use 800 FR right
@@ಮಮತ_onlyone yes 800 or 1000
@@diyrepairs hmm also is it okay to use a High GPD pump on Low GPD membrane
Like 100 GPD pump With 80 GPD membrane
@@diyrepairs plz respond
@@ಮಮತ_onlyone yes but not greater than 100 gpd
This video was super helpful thank you
thanks and welcome
Very nice video. Thank you sir!
welcome
What is lg membrane gpd its not mentioned on membrane itself
So I increase the flow restrictor does the pure water flow increase or decrease?
increasing the flow restrictor value decreases the pure water flow.
@@diyrepairs That's what i figured. Thanks. But, if the flow of pure water is already very low, does that mean you should get a higher gpd pump or the membrane or both? Like would a 100 gpd pump work on a 80 gpd membrane or do we need matching ones?
@@pulkitchanana Matching is required for all, i.e. pump, membrane and FRT
i got a 400gpd RO membrane and may TDS is 280. what value of FR should i use?
Why are you using 400 GPD RO membrane?? The value of flow restrictor for 400GPD membrane should be 3150 mL.
I have raw water tds more than 700 ,its bore well water which membrane and flow restrictor should i use ,pls guide me thanks
I have 100gpd pump is that ok?
sir, use 100GPD membrane and 800 ML flow ristrictor
@@diyrepairs thanks for your valuable reply.
After changing sediment filter tds is 20 pure it how to set tds and input tds below 400
OMG why is every video about flow restrictors from india
Membrane-NF40 75gpd
Pump- 75gpd
Raw water tds 180-200
Which fr to use
you can use either 525 or 550
I don't think you really even need an NF filter for this low a TDS. You probably are getting treated water. Maybe just get a UF+UV setup to be on the safer side.
@@pulkitchananayeah people will crib about paying taxes but will happily waste money on RO for just 200 tds
What is mf filter
@@pulkitchanana no, i have mixed raw water of corporation+ borewell
Family Members. 4-5
Tap Water TDS 320
Pump 100 GPD
Membrane 75 GPD
FR kitne ka lagau ?
550 laga sakte hain. is video ka hindi version bhi dekh sakte hai RO ke playlist me jakar. maine pura chart aur calculation de rakha hai.
550