That’s honestly a good question. A question that I do not have the answer to. But if I remember correctly with the wheel off they are accessible. I could be wrong but maybe this is something I should look into
I got the street version and so far so good with them being in the car for about a year now. I have -4 degrees of camber in the front with these installed. Not sure as to why they only mention castor for you on the G body’s
lol i have this issue too i’m running 45s tires upfront and it slaps and eats away my tires smacking the cotter pin, so this would be me fix?tbh i like running fat tires upfront , it helps protect my bushings and over suspension lol
The front arms weren’t bad. To be honest I had them maxed out and I knew it needed to be maxed out because I needed to clear the fenders with my wheel setup so the fronts were set before going in
mine are squaking so bad i greased the fittings and silicone pb blastered everything what do i do. pull it off and grease between the fitting and chassis? literally put em on 2 days ago.
So I actually got it aligned that week and on the alignment rack we were able to max out the front to -4 which is just the right amount for me to because to tuck and not rub. I still anticipate on raising the car a bit so I can readjust my dampening. If you’d like I could shoot a couple of clips for the next video on how it sits.
I got mine 9 months ago, they only really squeak when I drive up my garage and hit the angle of the driveway hard. They have grease points to keep them lubricated regardless they don’t make noise
I just installed mine and as soon as I installed them on the dry/dirty part of the chassis I already heard the squeak. I took some good synthetic grease and lubed everything the arm touched on the chassis and there was zero noise
Would it mess with the camber too much if you had the fittings facing down so you could grease the fittings without disconnecting the ball joint?
That’s honestly a good question. A question that I do not have the answer to. But if I remember correctly with the wheel off they are accessible. I could be wrong but maybe this is something I should look into
I wanted to get these for my q for camber. But noticed on the website they only mention castor?
Also are these the race or street model
I got the street version and so far so good with them being in the car for about a year now. I have -4 degrees of camber in the front with these installed. Not sure as to why they only mention castor for you on the G body’s
@@velocitygarage damn -4 lol. So they do fix camber to positive right or straight?
I have not done positive camber but if I were to guess I’d say yes they could adjust to positive and yes to straight
@@velocitygarage is it true that they can’t be adjusted while mounted? They have to be removed
@@huhSHUA yes this is true
lol i have this issue too i’m running 45s tires upfront and it slaps and eats away my tires smacking the cotter pin, so this would be me fix?tbh i like running fat tires upfront , it helps protect my bushings and over suspension lol
45s are a little aggressive if you’re going low. Max I’d do is 40s which I have
Was it a pain to get it aligned? I hear people say you have to disassemble these and remove the ball joint and strut just to adjust it
it looks like you do, theres no way to adjust it in the car. very very poor design honestly.
The front arms weren’t bad. To be honest I had them maxed out and I knew it needed to be maxed out because I needed to clear the fenders with my wheel setup so the fronts were set before going in
mine are squaking so bad i greased the fittings and silicone pb blastered everything what do i do. pull it off and grease between the fitting and chassis? literally put em on 2 days ago.
Honestly never encountered a squeak from my control arms. I’d say give Z1 a heads up and possibly send you out some new arms for no charge
How many degrees of camber does it give you when they’re maxed out?
So I actually got it aligned that week and on the alignment rack we were able to max out the front to -4 which is just the right amount for me to because to tuck and not rub. I still anticipate on raising the car a bit so I can readjust my dampening. If you’d like I could shoot a couple of clips for the next video on how it sits.
What the max amount of negative camber these give ?
-4 degrees of camber
@@velocitygaragewhat about positive
any squeaking from them?
I got mine 9 months ago, they only really squeak when I drive up my garage and hit the angle of the driveway hard. They have grease points to keep them lubricated regardless they don’t make noise
I just installed mine and as soon as I installed them on the dry/dirty part of the chassis I already heard the squeak. I took some good synthetic grease and lubed everything the arm touched on the chassis and there was zero noise
As u prob know by now , the grease nipple go down , not up
I did realize that after a month of have my it like that. No damage done but I appreciate the heads up