I had a bad solder joint on that relay terminal this morning . Resoldered it and then it was ok. Luckily the trace on the board was not burnt up in my case. Maybe we will get another 28 years out of this furnace 🙂
FYI there's a self test the unit will do by briefly shorting the "C" (24v) terminal to the test connection.. after brief delay, unit will test ID fan, blower (both speeds) and the igniter element.
I had a bad solder joint on that relay terminal this morning . Resoldered it and then it was ok. Luckily the trace on the board was not burnt up in my case. Maybe we will get another 28 years out of this furnace 🙂
So glad you got yours working. I'm basically rebuilding mine part by part...thats great info for future reference. 💚💫
Thanks for posting this, I had the same issue and got it fixed.
Having same issue I'll be doing this next
FYI there's a self test the unit will do by briefly shorting the "C" (24v) terminal to the test connection..
after brief delay, unit will test ID fan, blower (both speeds) and the igniter element.
Mine is the sideways style weather maker 8000 , I don't see a filter in there. ? Do you know where it's located ? Thanks 👍
I have two short flashing and 4 long flashes following
Good info!
I can’t find igniter
Thanks