You can change the setting directly on the Hover. Long press either of the side buttons to put into change mode, then short press to rotate through options. Press center button to select. While in change mode, another long press of the side buttons will change between options.
Follow mode : it will follow you from behind Dolly track : it will folllow you from your front Make sure it show red light after launching from your palm ( red means it has locked to you)
In follow mode , you have to stand not moving and wait the drone come back and the light turn to green in order to have a perfect landing on your hand.
Hey thanks for posting. Since i never used a drone before, i did not wanted to go to any manual setting, also the idea why I choose the X1 Pro over any DJI, is because the flight modes, so they need to suit my needs, so far so good, I hope they fix the bugs soon. That being said, I will try what you mention, hopefully I don´t crash or loose it Cheers
@MyOtherChannel-q9f the manual mode is pretty handy, you can adjust the speed and all in the settings till u get used to flying it in manual, you can also change the settings like exposures, iso etc aswell
You lucky ,I didn't receive my Promax cycle combo pack yet, such as ordered it month ago I am in U.S California, this is going to be my first drone too, I like to see the videos from the first timer 2 🔥🤟
I don't understand. There are explanations for each modes in the app. So why don't you check that first? Apart from that I much say some times did look weird.
Hello, thanks for writing a comment, so the errors in minute 4:55 and 7:51 is user (me) error? What is a bit weird is that the clips cut in flight, one flight has 2 clips that are not continuous, it cut, a few seconds passed, and then recorded again, hopefully it is fixed by an update. Thanks and cheers
@@MyOtherChannel-q9f It does look strange I agree. Maybe because your phone was not on you? You are as far as I saw the first one with these failures. I had the previous X1 and that worked just fine.
el hover pro max me tiene preocupado y yo aun no lo recibi pero empiezo a arrepentirme de haberlo comprado. Parece que mucha gente está informando de fallos como aterrizajes inesperados, fallos en seguimiento, fallos al sincronizar el beacon o que es imposible pasar archivos al pc y otras cosas, algunas muy graves. Tienen que corregir los fallos pronto porque parece que han sacado a la venta un producto totalmente inacabado y con multiples fallos y ojala que todos los fallos se puedan solucionar con actualizaciones de software porque ya muchos dicen que hay fallos de hardware y eso ya no tiene solucion para todos los que lo compramos. Esto puede hacer que Zero Robotics caiga mucho como empresa confiable y es una pena
Hola, gracias por comentar, claramente es un producto que falta pulir su sistema, interfase, firmware. Ojala que el problema no sea de hardware ;) Saludos
I believe they rushed the product, as I believe that DJI next line of products like the Air 3S and next Mini 5 will have a lot of the features of the Neo, they have already shown a DJI beacon and having AI built into the drone as well as obstacle avoidance will make the next DJI drone very interesting. I believe 15th October is the release details of the new Air 3S. Hoverair had to get the X1 pro and pro max to have any hope of completing, of course the X1 pro is sub 250gm so the Air 3s is no threat to that market, but the next Mini pro all bets are off.
@19ab59 Well I have the competition the Neo and while it does not fit in my pants it still small enough for my jacket pocket. But the Neo and probably the X1 is hopeless in any wind more than 25kph a 45kph gust managed to flip my Neo over, no big deal as it was on grass so no damage. But little drones vs wind gusts are not great
@@gregb1599 I chose the Hover X Pro for it's foldable design because I like that of the X1. I did check the Neo but is was to big for me. I use it mainly for road en gravel biking. It's faster and better in windy conditions. Flies over water and is 4K which the X1 wasn't.
No lo vendas aún. Si es tu primer dron esté te va como anillo al dedo para principiantes. De hecho es el primer video de TH-cam que veo donde el protagonista en lugar de enseñar, aprende con los comentarios de los demás! 😂😂
You can change the setting directly on the Hover. Long press either of the side buttons to put into change mode, then short press to rotate through options. Press center button to select. While in change mode, another long press of the side buttons will change between options.
Amazing thanks, I should have rtfm hahaha, cheers!
Great video, thanks for sharing 👍🏾
Thanks! it is appreciated
Follow mode : it will follow you from behind
Dolly track : it will folllow you from your front
Make sure it show red light after launching from your palm ( red means it has locked to you)
Thanks!
In follow mode , you have to stand not moving and wait the drone come back and the light turn to green in order to have a perfect landing on your hand.
Thanks! Will apply it on my next try
the max alt in manual will allow for far higher birds eye as well, think its around 100-120 metres which is pretty cool
Hey thanks for posting.
Since i never used a drone before, i did not wanted to go to any manual setting, also the idea why I choose the X1 Pro over any DJI, is because the flight modes, so they need to suit my needs, so far so good, I hope they fix the bugs soon.
That being said, I will try what you mention, hopefully I don´t crash or loose it
Cheers
@MyOtherChannel-q9f the manual mode is pretty handy, you can adjust the speed and all in the settings till u get used to flying it in manual, you can also change the settings like exposures, iso etc aswell
Amazing, thanks 🙏👍
You lucky ,I didn't receive my Promax cycle combo pack yet, such as ordered it month ago I am in U.S California, this is going to be my first drone too, I like to see the videos from the first timer 2 🔥🤟
Hey Ben, thanks for commenting! I hope you get it soon, let us know how it goes.
Cheers
I don't understand. There are explanations for each modes in the app. So why don't you check that first? Apart from that I much say some times did look weird.
Hello, thanks for writing a comment, so the errors in minute 4:55 and 7:51 is user (me) error?
What is a bit weird is that the clips cut in flight, one flight has 2 clips that are not continuous, it cut, a few seconds passed, and then recorded again, hopefully it is fixed by an update.
Thanks and cheers
@@MyOtherChannel-q9f It does look strange I agree. Maybe because your phone was not on you? You are as far as I saw the first one with these failures. I had the previous X1 and that worked just fine.
Do I need the phone to be on me all the time?
Usually I don't like to carry my phone everywhere 😱
As far as I understand ye. Or use the beacon @@MyOtherChannel-q9f
@@MyOtherChannel-q9f I'm not sure but I think so. Maybe try it out the next time?
el hover pro max me tiene preocupado y yo aun no lo recibi pero empiezo a arrepentirme de haberlo comprado. Parece que mucha gente está informando de fallos como aterrizajes inesperados, fallos en seguimiento, fallos al sincronizar el beacon o que es imposible pasar archivos al pc y otras cosas, algunas muy graves. Tienen que corregir los fallos pronto porque parece que han sacado a la venta un producto totalmente inacabado y con multiples fallos y ojala que todos los fallos se puedan solucionar con actualizaciones de software porque ya muchos dicen que hay fallos de hardware y eso ya no tiene solucion para todos los que lo compramos. Esto puede hacer que Zero Robotics caiga mucho como empresa confiable y es una pena
Hola, gracias por comentar, claramente es un producto que falta pulir su sistema, interfase, firmware.
Ojala que el problema no sea de hardware ;)
Saludos
I believe they rushed the product, as I believe that DJI next line of products like the Air 3S and next Mini 5 will have a lot of the features of the Neo, they have already shown a DJI beacon and having AI built into the drone as well as obstacle avoidance will make the next DJI drone very interesting. I believe 15th October is the release details of the new Air 3S. Hoverair had to get the X1 pro and pro max to have any hope of completing, of course the X1 pro is sub 250gm so the Air 3s is no threat to that market, but the next Mini pro all bets are off.
@@gregb1599 I agree on that but I prefer the Hover because of it's foldable design.
@19ab59 Well I have the competition the Neo and while it does not fit in my pants it still small enough for my jacket pocket. But the Neo and probably the X1 is hopeless in any wind more than 25kph a 45kph gust managed to flip my Neo over, no big deal as it was on grass so no damage. But little drones vs wind gusts are not great
@@gregb1599 I chose the Hover X Pro for it's foldable design because I like that of the X1. I did check the Neo but is was to big for me. I use it mainly for road en gravel biking. It's faster and better in windy conditions. Flies over water and is 4K which the X1 wasn't.
Te lo compro , si estas interesado😉
Hola, envíame un DM, saludos
No lo vendas aún. Si es tu primer dron esté te va como anillo al dedo para principiantes.
De hecho es el primer video de TH-cam que veo donde el protagonista en lugar de enseñar, aprende con los comentarios de los demás! 😂😂
I am enjoying more your accent ...just saying ;)
🤣