Thanks for this video. I never wrapped before and wonder whether I can do this "wet wrap" method using Oracal 651 (Intermediate Cal - it has permanent adhesive) on my car (Hood, Roof & Trunk) in one piece I don't want to arguing about ideal way to do this (dry method & knifeless tape etc, as many Pro suggestions), but want to stick to this way (wet wrap) with some reasons. I need your advise here about: A. Glassing process (since there's a solution underneath) As on your video the first step would be squeegee out the solution & also the air from underneath the vinyl. B. After above process (A), which section should I squeegee first? Lets say in Trunk; The flat surface or the curve one? C. Post Heating Same time frame as Dry method? (After 30 min but no longer than 12 hours) or after 24 hours? Thanks before
Hi there, Thanks for your inquiry. Please connect with our Graphics team for more info about your questions, they're our experts! graphics.averydennison.com
Nope , it protects the paint of the car. BUT ! if you use a very high alcohol mixture to apply the ppf and you don't squeegee it out , it can get stuck between the ppf and the car that may damage the clear coat. but the chance of that happening is minimal so.
![[UNCUT] “อภิสิทธิ์” ครม.อุ๊งอิ๊ง แย่งเก้าอี้กันฝุ่นตลบ “ทักษิณ” บงการเอง Iคนดังนั่งเคลียร์I 21ส.ค.67](http://i.ytimg.com/vi/a_b-kItw2jY/mqdefault.jpg)
amazing!
def saving this video for future reference. i plan on offering PPF to my customers next year :)
Music to our ears!
Great video. The guy in the green Shirt looks like John from Scotts solar in Arlington Texas.
I appreciate the video
Excellent video, so many tips Which will help me.
Thq so much
Thanks for this video.
I never wrapped before and wonder whether I can do this "wet wrap" method using Oracal 651 (Intermediate Cal - it has permanent adhesive) on my car (Hood, Roof & Trunk) in one piece
I don't want to arguing about ideal way to do this (dry method & knifeless tape etc, as many Pro suggestions), but want to stick to this way (wet wrap) with some reasons.
I need your advise here about:
A. Glassing process (since there's a solution underneath) As on your video the first step would be squeegee out the solution & also the air from underneath the vinyl.
B. After above process (A), which section should I squeegee first? Lets say in Trunk; The flat surface or the curve one?
C. Post Heating
Same time frame as Dry method? (After 30 min but no longer than 12 hours) or after 24 hours?
Thanks before
Hi there,
Thanks for your inquiry. Please connect with our Graphics team for more info about your questions, they're our experts! graphics.averydennison.com
👏👏 i see how you cut in the paint straight with the blade , that paint is not gone be scratch 😂😂😂
How does it compare with Xpel and 3M? Price, performance etc...
PAUL F its an Avery video, there just gonna tell you Avery is the best
what is the difference between the SPF-XI and Supreme Defense ?
I got a job in this and man it was frustrating as hell i moved on from it but man was it annoying lol
Most shops offer full body protection but doesn't include rooftop, should i add to rooftop also ?
You definitely can!
Wow very nice ❤️
great Video
great vid! how do you cut around badges?
Hi, first off amazing job. Did you guys use at 5:22 have to use any kind of heat gun to push down on curve area of the hood? thanks in advance.
what steamer is that? Justin showed it to us in Miami and forgot to write down the brand.
Hi there,
Reach out to our Graphics team, they know best! graphics.averydennison.com
Can you just use slip solution and skip the tac solution? I would think just the SS allows for more play time.
Great and we need and wish videos in Real Best 4K 60fps HDR resolution clarity quality soon please and Sound in full HD 3D Stereo
also what kind of steam gun and heat gun do you recommend?
This metirial available in India
Hi there,
You can find a distributor near you, using our tool: graphicsap.averydennison.com/en/home/where-to-buy/distributors.html
@@AveryDennisonVideo I need in India hyderabad . Can u send me location .please .
Where can I get that cutting tool? Can’t find one anywhere and looks comfortable. The wide-mouth encased cutter.
Hi there,
You can find all our tools here: graphics.averydennison.com/en/home/graphics-products/vinyl-wrapping-application-tools.html
How much 1 roll 60 inches here in Philippines with shipping fee
Would you recommend doing this over clearcoat that is barley started to fade
Hi there,
Be sure to connect with our Graphics team for more info, they're the experts! graphics.averydennison.com
The film has to adhere to clearcoat so unfortunately not going to work if the clearcoat is gone
What’s the cost to do that on same car
Hello, sir! Did you leave the PPF on the Porsche's logo badge?
I guess not, saw some install videos where they cut around a badge.
Can it be used in cold weather like Canada?! Can snow, ice or snow brushes dommage the film?
Most definitely! Connect with our team for more info: graphics.averydennison.com
Can you give me a website to buy these tools?
Can i install ppf on top of a car with ceramic coatings?
Hi there,
Great question! Connect with our Graphics team for more info, they're the experts! graphics.averydennison.com
Can the glue damage the paint? Or when the film is removed, does it cause any damage?
Nope , it protects the paint of the car. BUT ! if you use a very high alcohol mixture to apply the ppf and you don't squeegee it out , it can get stuck between the ppf and the car that may damage the clear coat. but the chance of that happening is minimal so.
Where do you guys get those large rolls? I can't seem to fnd any. That's what I need to know
Hi there,
Which country are you located in? We can help you find a distributor near you.
@@AveryDennisonVideo United States. California
Hi there,
You can use our tool to find a distributor near you: graphics.averydennison.com/en/home/about-us/locations.html
What kind of steamer do you guys use?
Connect with our Pros to find out! graphics.averydennison.com
Hey mate, do u ship to Australia?
Hi there,
Yes we do! Use out tool online to find a distributor near you: graphicsap.averydennison.com/en/home/where-to-buy/distributors.html
Who in New Jersey do you recommend?
Hi there,
You can find all our certified installers here: graphics.averydennison.com/en/home/resources-and-learning/find-certified-installers.html
👏👏👏👏
Hexis bodyfence??? Yes or no
Check with our Graphics Solutions experts! graphics.averydennison.com
Can you recommend a good degreaser?
Isopropyl alcohol.
is this product sold on amazon?
Hey there,
You can purchase it through one of our distributors: graphics.averydennison.com/en/home/about-us/locations.html
What steamer do you use?
Hi there,
Connect with our Graphics team directly for more info! graphics.averydennison.com
Hi brow I want to aply
hello you do it very nice job I want working with you if you want
where can I find this stuff? trying to buy some
Hi there,
Which country are you located in?
@@AveryDennisonVideo USA im trying to find a 4'x5' section for my hood
Use our tool to find a distributor near you: avydn.co/2XwapXo
from where we can purchase this??
Hi there,
Which country are you located in? We can direct you to the distributors nearest to you.
@@AveryDennisonVideo India, Utter Pradesh, Basti
@@AveryDennisonVideo I need this paper
I'm buying this material from India
From where did u purchase?
How much is it worth?
I do not recommend clay baring without at least polishing afterwards
Really hard to follow the procedures with this guy. Doesn’t really pause and he has an annoying voice.
basic.. 😅