This was one of the only ones that worked on my car, other people described it wrong but the only thing I would recommend is do it over without the music, please
Thanks for the comment and I’m glad it helped you. Yeah the music was supposed to be a joke because of all the opening and closing of the doors and such. 😀
No, it will only roll down with the key fob. You can use the key (insert into the back key hole and turn) or the rear window button on the dash to roll the back window.
I have a 2007 and when I followed these steps, after I press the lock button at the end the locks cycle twice instead of once. And then after I open the door, the remote doesn’t work. Done this like 5 times now and starting to get frustrated. Any help would be appreciated.
That could indicate that you can’t add any more remotes. This link has a few options so you can tell how many FOBs have been added. I’m not sure but hope this helps! northcoastkeyless.com/2007-toyota-4runner-keyless-entry-remote-programming-instructions/
Thanks for the video! I tried this so many times that I lost count and I still can't get stage 1 to work where I reset the codes and connect to the vehicle sensor. I wasn't able to get to Stage 2 where I actually programmed the Fobs. Do you know how I determine is my vehicle sensor is actually working?
Got it to work but when I’m done with the steps and the car cycles twice and see it cycle once for you. If it cycles twice so my car have to many remotes on the car?
Once you hear the locks cycle after you do the door and key Hokey Pokey (open and close, insert and remove) you push the lock and unlock at the same time, then push and hold the lock. It happens at 1:30 of the video. The music and video fade in/out is just a joke because the whole procedure feels like the Hokey Pokey 😂.
Nope. Here is exactly what I bought and used in the video. fits 1999-2009 Toyota 4Runner / 2001-2007 Sequoia Key Fob Keyless Entry Remote (HYQ12BBX w/Panic) www.amazon.com/dp/B06XRKP23F/ref=cm_sw_r_cp_api_glt_fabc_MNWKXMEE1FTX7ZYE13TM
I don’t believe so. For the 5th gen 4Runners you will need another device to program them. Check out tomskey.com as they have a pretty cool program where they will rent the programming device to you and you can just send it back. Cheaper than what a dealer would charge. Hope that helps!
Here is a link to the instructions that worked for me in this video: www.remotesremotes.com/Key-Fob-Keyless-Entry-Remote-for-2007-Toyota-4Runner-s/6243.htm?searching=Y&sort=5&cat=6243&show=30&page=1
Here is a link to the instructions that worked for me in this video... www.remotesremotes.com/Key-Fob-Keyless-Entry-Remote-for-2007-Toyota-4Runner-s/6243.htm?searching=Y&sort=5&cat=6243&show=30&page=1
Si desconectaste la batería se desprograma, Debes volver a programar bajando y subiendo la ventanilla trasera con el botón al ⬇️⬆️ y mantener durante 10 segundos y queda programada. Espero te sirva a mi me funcionó
Yeah, thanks for the feedback. I was trying to be funny that the instructions were like the hokey pokey so that's the animation that's coming through as a joke...
Thanks, but please get rid of that ridiculous video that plays over your instructions!!
Thanks for the feedback…it was just my attempt at humor. Every time I add keys it always involves some sort of ‘Hokey Pokey’ 😀
I just bought 1 remote and do not know what to do program it, your video is super helpful I follow up your video and got it done, thanks
Glad it was helpful!
So simple when I followed your video. Worked like a charm. Great video! Thanks!
Glad it was helpful!
This video saved me nearly $400 on my 2008 4Runner Limited.
Awesome!
Thanks man I just followed along with you and it worked perfectly.
Awesome. Glad it helped.
This was one of the only ones that worked on my car, other people described it wrong but the only thing I would recommend is do it over without the music, please
Thanks for the comment and I’m glad it helped you. Yeah the music was supposed to be a joke because of all the opening and closing of the doors and such. 😀
07•28•2023: Thanks Bro👍🏼
2005 4Runner x 2 FOBs 🔑
Awesome. Glad I could help
Thank you. Great video
Thanks!
Great video it worked for
Me on the first try
Glad I could help
Brooo this works needs a follow
Is the back window suppose to go up too with the back window button? Mine only goes down but won’t go up
No, it will only roll down with the key fob. You can use the key (insert into the back key hole and turn) or the rear window button on the dash to roll the back window.
Thanks 🙏🏼 for you help
Happy to help.
I have a 2007 and when I followed these steps, after I press the lock button at the end the locks cycle twice instead of once. And then after I open the door, the remote doesn’t work. Done this like 5 times now and starting to get frustrated. Any help would be appreciated.
That could indicate that you can’t add any more remotes. This link has a few options so you can tell how many FOBs have been added. I’m not sure but hope this helps!
northcoastkeyless.com/2007-toyota-4runner-keyless-entry-remote-programming-instructions/
@@handy.ginger it actually turned out that the aftermarket fob I bought was bad. I bought a used OEM fob instead and it worked perfectly first try!
Thanks for the video! I tried this so many times that I lost count and I still can't get stage 1 to work where I reset the codes and connect to the vehicle sensor. I wasn't able to get to Stage 2 where I actually programmed the Fobs. Do you know how I determine is my vehicle sensor is actually working?
No sorry. I’m not sure how to do that.
Got it to work but when I’m done with the steps and the car cycles twice and see it cycle once for you. If it cycles twice so my car have to many remotes on the car?
Yes, that sounds correct.
Mine won’t go into programming mode. Any suggestions
Here are the step by step instructions I followed in the video.
www.remotesremotes.com/v/vspfiles/photos/prog/toyota/to-p7g.pdf
👍🏽👍🏽👍🏽
Thanks!
Alarm keeps coming on 2006 4runner when in programming mode; therefore, cannot press buttons to add a new remote. Any idea?
I’m sorry, but I don’t have any ideas for that. I’ve not experienced that issue. Anyone else out there that could help?
Does this work for 2001 Toyota 4Runner?
It’s possible, but I can not confirm that it does
You said that you push lock and unlock at the same time but you never do it. Maybe my fob is bad.
You music is on, are you trying to compete with it?
Once you hear the locks cycle after you do the door and key Hokey Pokey (open and close, insert and remove) you push the lock and unlock at the same time, then push and hold the lock. It happens at 1:30 of the video.
The music and video fade in/out is just a joke because the whole procedure feels like the Hokey Pokey 😂.
Do I have to have a transponder key for this to work
Nope. Here is exactly what I bought and used in the video.
fits 1999-2009 Toyota 4Runner / 2001-2007 Sequoia Key Fob Keyless Entry Remote (HYQ12BBX w/Panic) www.amazon.com/dp/B06XRKP23F/ref=cm_sw_r_cp_api_glt_fabc_MNWKXMEE1FTX7ZYE13TM
@@handy.ginger okay I'll double check the part number so I can send this one back if it's wrong.
Would this work on a 5th gen 4runner?
I don’t believe so. For the 5th gen 4Runners you will need another device to program them. Check out tomskey.com as they have a pretty cool program where they will rent the programming device to you and you can just send it back. Cheaper than what a dealer would charge. Hope that helps!
Udaman!
Thanks!
MINE DOESNT WORK EITHER WHEN I START PROGRAMMING INSTEAD OF LOCKING TWICE WHEN HITTING THE LOCK IT LOCKS 4 times and doesnt programm
Here is a link to the instructions that worked for me in this video:
www.remotesremotes.com/Key-Fob-Keyless-Entry-Remote-for-2007-Toyota-4Runner-s/6243.htm?searching=Y&sort=5&cat=6243&show=30&page=1
Did you find a resolution ?
Mine dosent works it works but after open door it dosent work
Here is a link to the instructions that worked for me in this video...
www.remotesremotes.com/Key-Fob-Keyless-Entry-Remote-for-2007-Toyota-4Runner-s/6243.htm?searching=Y&sort=5&cat=6243&show=30&page=1
I'm having this same issue, did you ever figure it out?
Any idea why my rear window wont open with the key
Just to be clear, when you put the key in the slot on the tail gate the window doesn’t function? You might need a new window motor.
Si desconectaste la batería se desprograma, Debes volver a programar bajando y subiendo la ventanilla trasera con el botón al ⬇️⬆️ y mantener durante 10 segundos y queda programada. Espero te sirva a mi me funcionó
What’s with the animation in the instructional video? That’s annoying
Yeah, thanks for the feedback. I was trying to be funny that the instructions were like the hokey pokey so that's the animation that's coming through as a joke...
That is a Toyota Camry not a 4Runner
That’s a 4Runner.
Yeah, it's a 4Runner. Here is my 4Runner playlist for other videos staring this 4Runner :)
th-cam.com/play/PLGuXWrbnXTXMKoHRQ6utsDmIbg42gEMoJ.html
Bro that music shit sucks overtop of your instructions
lol. Yeah it was a joke because the instructions sound like the Hokey Pokey.
Wtf is that music
It’s some old guy doing the Hokey Pokey. Supposed to be a joke. Lol
Great video, thanks. I have an unrelated question, are your seats, OEM or aftermarket seats or covers?
I bought the car used about 7 years ago and those are the seats that were in it then so I would assume they are OEM.