As a company you should have done proper research on how ultrasonic waves work. Even if mosquitoes are bothered by the waves ultrasonic waves travel in a straight line like a laser beam that means the mosquitoes will have to clash with that narrow beam to even be affected.
What is the benefit of this over the EMR05? It sounds like the disadvantage is that it is larger and heavier. But the advantage is that the fan allows the chemical to disperse more quickly and be effective in a breeze. It also has the 2 different indoor and outdoor levels. Is that all correct? Did I miss anything?
The User interface is simple with the dual modes. The new FCB 2.0 heating system also makes it disperse faster hence the 5 minutes and makes it less hot around the heating area. The unique feature is the indoor setting, it reduces power consumption and makes the pads last longer. Hope this helps!
I have one and have used it several times now. I can't detect any effect. the mosquitoes fly directly over the device. I think the device isn't getting hot enough. very disappointing
It's suppose to happen, it's the in-active diffusion system, it helps diffuse the mosquito repellent mat quicker, allowing it to create the protection zone in only 5 minutes compared to 10 with other conventional repellents
What a bad test and as so often on TH-cam. Is this a sales video or a test? If you had measured this in the thermal image, you would have seen that the Nitecore EMR30 SE only delivers 50% of its output and only reaches approx. 70 degrees at night with loaded plates. This is not enough to vaporize the active ingredient properly. The manufacturer claims 165 degrees in its advertising. You can't even achieve that without plates at an outside temperature of 45 degrees.
![[กูเพิ่งซื้อมึงปิดหนี] 20 นาที ผมรีวิวเกมที่แย่ที่สุดในโลก CONCORD](http://i.ytimg.com/vi/XhC-3q3Ii7I/mqdefault.jpg)
As a company you should have done proper research on how ultrasonic waves work. Even if mosquitoes are bothered by the waves ultrasonic waves travel in a straight line like a laser beam that means the mosquitoes will have to clash with that narrow beam to even be affected.
What is the benefit of this over the EMR05? It sounds like the disadvantage is that it is larger and heavier. But the advantage is that the fan allows the chemical to disperse more quickly and be effective in a breeze. It also has the 2 different indoor and outdoor levels. Is that all correct? Did I miss anything?
The User interface is simple with the dual modes. The new FCB 2.0 heating system also makes it disperse faster hence the 5 minutes and makes it less hot around the heating area. The unique feature is the indoor setting, it reduces power consumption and makes the pads last longer. Hope this helps!
I have one and have used it several times now. I can't detect any effect. the mosquitoes fly directly over the device. I think the device isn't getting hot enough. very disappointing
Why the fan doesn't run constantly, it turns on and off the entire time. Did I receive a faulty unit?
It's suppose to happen, it's the in-active diffusion system, it helps diffuse the mosquito repellent mat quicker, allowing it to create the protection zone in only 5 minutes compared to 10 with other conventional repellents
16 feet diameter?
i bought one, no effect on mosquito
I went to the far side of the moon yesterday and there are no Nazis mining for Helium 3.
Same
What a bad test and as so often on TH-cam.
Is this a sales video or a test?
If you had measured this in the thermal image, you would have seen that the Nitecore EMR30 SE only delivers 50% of its output and only reaches approx. 70 degrees at night with loaded plates. This is not enough to vaporize the active ingredient properly. The manufacturer claims 165 degrees in its advertising. You can't even achieve that without plates at an outside temperature of 45 degrees.