For the gear slipping issue, I'd recommend just having the engine sideways with wheels directly attached to the crankshaft, this will prevent gear slipping and I find it makes the engines perform better.
I know this is two yrs old and stuff, but you can try to make a sort of clutch system where the driveshaft and rear axle meet. Just make the driveshaft two blocks shorter, put a piston right before the cross, and connect it to a switch and make it push onto it. Works well for doing hill-starts and pulling heavy stuff. Just let the engine rev up, dump the clutch, engange it, then dump it until you're moving fast enough for it to not stall. I did this with kAn's three pìston engine and cluld pull a semi-loads worth of stone
@@gearzpop8457 yea so the piston in on longer but when i build engine i have the whole timing pattern on a bearing with a different design so i can change it on the fly
@@Sangeeth_5936 Thanks, but It was a while ago that I was trying to build this, and I just bought it, seemed like a better thing to do that do something illegal for it
So, I really can't understand how does it work. I mean, do you use 45 degrees between each part of log and use that 4 sensors to power pistons? I tried to make the classic tipe motor with 45 degrees, but 30 works better. Sorry for my English, I'm Russian🇷🇺
1:45
*quik maths*
This is a survival dream car!
Workshop? I want to experiment with em'
For the gear slipping issue, I'd recommend just having the engine sideways with wheels directly attached to the crankshaft, this will prevent gear slipping and I find it makes the engines perform better.
Yeah that's another way to look at it. Though I like this way as it seems more natural and probably gets caught less going over stuff.
I know this is two yrs old and stuff, but you can try to make a sort of clutch system where the driveshaft and rear axle meet. Just make the driveshaft two blocks shorter, put a piston right before the cross, and connect it to a switch and make it push onto it. Works well for doing hill-starts and pulling heavy stuff. Just let the engine rev up, dump the clutch, engange it, then dump it until you're moving fast enough for it to not stall. I did this with kAn's three pìston engine and cluld pull a semi-loads worth of stone
Kan is a legend on making sa piston powered engine
take two of those engines and put them in a V configuration (so you have a V8 engine). it would be so cool, if you dont want to do it ill try myself.
i tried and it’s a pain, but i’m not exactly an expert though to be fair
@@magnol1a yup I tried doing it after making this comment. I succeeded but it sucked lol
rally krabban yeah it’s pretty annoying to do
@Juddley Cole yup they're strong as fuck but the compromise always seems to be stability or framerate lol
I made a v6 its slow revving at 2000 rpms in apparently reverse I was trying to tweak it to run better and broke it
It is still to be improved, however excellent ingenious and original work
with the jerky ness, I found if u "increase the timing" and have the pistons fire earlier they like it more
@@gearzpop8457 yea so the piston in on longer but when i build engine i have the whole timing pattern on a bearing with a different design so i can change it on the fly
*when you try making this off video footage* Ehem, how did you get the curved pipes and T's where they are?
@@Sangeeth_5936 Thanks, but It was a while ago that I was trying to build this, and I just bought it, seemed like a better thing to do that do something illegal for it
I think ill use this in one of my builds
Wow thanks for te engine on the real lifw
This game is cool!
Trust me small isn't better
Best subtitles. Subscribed
I see that you did a "CRATE"JOB Xd
I-i mean XD
@@suslz224 lol
*GREATEST CREATION IN DAE WORLD*
@@gearzpop8457 make video "how to make logical gates for engines"
Pls
@@gearzpop8457 LOGICAL GATES FOR ENGINES,or How to make this engine
@@gearzpop8457 thank you in advance.
I am the 800th subscriber!
These are awesome!
I see 5 Pistons buddy
time stamp?
If I add 2 cylinders, then there will be more power. So?
thanks for telling me, definitely wouldn’t know if otherwise.
Now that's useful to not use fuel
So cool! :)
So, I really can't understand how does it work. I mean, do you use 45 degrees between each part of log and use that 4 sensors to power pistons? I tried to make the classic tipe motor with 45 degrees, but 30 works better. Sorry for my English, I'm Russian🇷🇺
So sick!
𝘭𝘰𝘴𝘦𝘳....
Coool project
Unmanned car is like: get rekt hoomin.
can u do gearbox? that would be cool
Show the build dude?
Ty so much vro
You could make it a semi truck
Gearz Pop 2 4 piston engines for 4 wheel action on a truck ? You could strip down a already built truck and proceed from there.
you could extend the hood on the truck like most trucking companies did
my bad
your 2 piston engine video helped me a lot
i like your engine set up, i made my own but it slower and the gear can't handle the torque,do you have any advice?
mega.nz/#F!HdIFSSjI!2C_qbJd1wp6cYVzPFp_hZA
try this, i don't know if it's working
sorry but i don't have a ufficial game, the only way is open your blueprints folder and put my bluprints in yours
Cool A real life engine in scrap macanic
@@Thmazchannel get the real game instead of the cracked one or whatever its called
@@beefybread5769 i already unistall it because it has too many bug, but after that my PC dead now i m using my smartphone
Can you put it on the workshop? I want to expirament with it and take a look.
XD EVERYONE USES KAN PARTS I TOOK HIS CRANK SHAFT BUT EVERYTHUNG ELSE MINE
Inpressive
can you make a tutorial for survival purposes
can you upload it or make a tutorial on how to make it?
Made a smaller one there is another
Would be great for survival.wont use fuil.
Can you make a tutorial?
is it on workshop!??!?!?! if not, please add it to work shop
link?
Workshop?????????????
Is there a tutorial
Gearz Pop will you make one cuz i have a downloaded version and cant acces steam
Gearz Pop i probably should
Кто от глюка лайк!
How
How to make a suspention car with this kind of engine
Gearz Pop i mean how to make a car with piston engine that has a suspntion on the wheels
Gearz Pop ok
Can you try to makea v8
did u upload it?
pls tutorial for the engine
Gearz Pop we need really help
Now put it in a civic
Make a tutorial on this
Bro how much hp?
i told you to make tuturials! silly!
ok
stuuuuiuuuppppiid stop harassing the ytuber
I want v6 i want v6
Or maybe you would do in your unique way
hows this not standard? lol
all popular cars have one
aah, i see...
@@gearzpop8457 what would be better than a a 4 straight occpupying the save space?
I have a V8 that goes faster