Thank you for watching! Please don’t forget to Subscribe, Like, & leave a comment and let me know what you think (good or bad) I’ve actually started a build series for a micro camper as well! I’ll link that below! 👇🏼👇🏼 th-cam.com/video/-paVczY0dBM/w-d-xo.html Welder I used! 👇🏻👇🏻 amzn.to/3E6yhq7 You can find links to parts in the description! These are affiliate links so I do get a small commission if you purchase anything thru my link. AT NO EXTRA COST TO YOU! It’s a great way to support the channel. You can find me on Instagram here👇🏻👇🏻 instagram.com/adv.4x4?r=nametag
Great video! Your narration was spot on , no unnecessary dialogue. I took lots of notes! My project is at 60% completion and will mirror your build, without the Timberlin! Thanks
You are a great builder and Teacher. You have inspired me to build my own Square drop trailer. Very informative and you explain the details well. 10/10
I'm new to your channel, just subbed after watching this trailer build. Anyway, my comment regards wiring, In the last 45 years, I have wired more trailers and bikes than I can keep track of. I truely HATE wiring, but I'm very good at it. I NEVER use the connectors supplied. I buy non insulated butt connectors. I slip on heat shrink tubing, crimp my wires, test everything, then solder every connection and then seal with heat shrink. It adds to your build time, but I've never had corrosion in my wire connections. I'm looking forward to watching more of your builds.
Man, that thing is amazing! Great job! When looking at the tailgate, I thought of a table and sliding or quick release hinges!!! Not sure what the weight is but being able to quickly remove gate that has fold out legs would make a badass portable table for cooking ect. If you had extra hinges on the side or something, you'd only need 2 legs.
If you would 45° all your ends, you would not need to cap the the end of your square tubing. Plus, it seals the tubing from getting water and other stuff inside. Just a tip from 42 years of Fabrication.
Just an awesome home build! Getting ready to build myself, but I’m in the trailer industry, so I’m planning on using a factory built frame. Using a cargo trailer frame for the base, 2X4 tube, and doing some mods myself. Thanks for the video!
Nice build indeed. I have a couple of thoughts. Ice, snow, and mud will build up on those runs of wire from the center to the outsides and drag those wires down. I'd suggest using those loop clamps about every 8" or so. From considerable experience, I can say those fenders will break those welds from vibration. Actually, the fender breaks, just outside the weld in the heat-affected area. I have found that attaching the top of the fenders to the bed sides will eliminate this problem.
5am Pacific time. That was well worth the wait Buddy. Excellent descriptions and explanations of your concept and design. The camera work along with your voice over really made it clear what you were doing and how. It came out awesome, great work.
As I said I would last night, I have been going through your previous uploads and enjoying every single minute of them honestly!. Your craftsmanship and attention to detail is why the finished product is awesome!. I have been paying attention closely and even picked up on a few new techniques if you will and I'm grateful for that. I definitely want to learn how to weld better if anything so I can truly build something like this and a camper maybe something bigger down the road.. Thanks for everything and sharing the experience and step by step process so we can see just how you did it!. 🙏🙏
Get 2 more attachment points for the tongue jack and weld them to the side of the trailer near the wheels. This way if you have a flat on the trailer you can use the tongue jack to change your tire.
Your craftsmanship and attention to detail is outstanding! I am thoroughly impressed. I love the use of the struts for your tent and how you have designed and put it all together. I enjoy following/watching a lot of offroad and overland channels. You've definitely picked up another subscriber and I am looking forward to your future videos!
First of all, excellent work! This is a huge resource for my first trailer build. A few thoughts, I’ll probably go with 2x3 .083 for the frame and use 3x3 3/16 for the spline. I love that aluminum is lightweight but it does corrode and will eventually look dull and gross (even though it’s beautiful right now) maybe raptor line a clear coat over it for the outside of the trailer, I also debated vinyl wrapping it then spraying clear) I probably would have raptor lined the entire frame as any spray paint just doesn’t hold up long term. Sealing the corners with a hard sealant inside the bed would be nice so crap doesn’t build up in the corners. Maybe some tie downs inside the bed for cargo, but that’s all personal preference. I struggle with the height of the tent when trailing being so high. I agree the tent needs to be 6’ up for annex room, etc. ideally I would use 30” linear actuators but I can’t figure out how to mount them outside the box and protect them from the weather. Love that the interior bed is smooth and usable, nothing for anything to catch on. The idea for me would be to use the bottom of the tent to seal against the inside of the trailer so keep the contents dry and the dusty coming off the vehicle out of it. However this greatly reduces storage height for what your bringing camping, so it’s a catch 22. I also debated building like a 10” drawer system 360 degrees around the trailer to seal the contents within the trailer and have the tent raise up from that structure. Obviously trade offs to whatever you do and that’s why it’s rad to build these for ourselves to meet our specific needs. Excellent work, hope you can grow your channel and get some money from the resources you provide.
The trailer pins to hold it closed, I used that to swap/change my tailgate to a ramp tailgate for loading bikes, easy on/off when you need to change it over.
I really enjoyed your build and learned a lot. Wonder if you might consider doing a basic how to for beginners welding video at some point. I don’t really know what a “pro” welder’s work looks like, but I’d say yours was pretty clean.
Thank you! I’m no pro by any means and like most people, I have a lot to learn! There should be a lot of good videos on TH-cam already by people who are professionals! I’d recommend following those to get started!
Thank you sir! I’m actually going to be doing a “giveaway” on this trailer very soon! I will upload a detailed video explaining things here very soon! Waiting on some patches to be delivered 👍🏼
Nice build. Giving me some great ideas for what I want to build. Question for you, why wouldn’t you use longer gas struts and lower the tent more? Being for off road, you always want weight as low as possible.
I thought about it but the longer you go the $ goes up from what I saw. Comfortable with the 8” raise tent sits about the height of a mid size bed rack on a lifted Tacoma.
Nice build , I’ve been looking for ages for a suitable trailer the do something like this not sure I have the skills or tools to do the work you have but gives me some ideas for sure 👍
Wow! It’s a great job. I want to make your tent roof rack. I would like to know if your rack move when you go in your rooftop tent ? I saw you put a nuts on each bars but is it enough?
Did you see anything that gives you more than 8" of lift? I like your design but I would like to be able to move it up and down a lot more than that. Thank you! love the build.
Awesome video brother! I was intimidated about building my own until I’ve been watching your president in videos, thank you much! Note @ 27:53 something seems out of its “proper” place😉
End of the video I show it raising up, it’s just reverse order to lower it. It’s An easy 1 person job forsure. And once you lock down the anti wobble bolts on the rack it’s solid 👌🏼
Would this tilt up so tongue is pointing straight up? I'm really wanting to build something very similar to this to tow behind 4runner but want to stand up on tailgate. Or where it stays on axel and and use a block of some kind (2x4) to keep tongue pointing up. Also I concur with previousl comment saying a budget build would be AWESOME! THANK YOU for this video and all the others you've shared.
Gday mate. Great video 👍. Very similar to what I’m thinking for my quad, and 3.7m dinghy on top. I enjoy ur channel. Another option instead of the tape for ur deck, is sikaflex. Does the same, not rattles and no electrolysis from dissimilar metals in contact. Not sure how the cost would compare, and maybe the sika has a higher possibility to be messy, especially when I’m doing it. Interesting to see ur method. Thanks again 👍👍
VHB is used in the fabrication of airplane wings, that stuff is strong, and is an excellent barrier to stop corrosion or any from of galvanic reaction.
Thanks for a GREAT video, changed how I want to rebuild our trailer, Looking for more stroke on the strut, we will be running a tent that is 250lbs, would 4 struts raited at 100lbs be too much lift? it will be holding solar panels underneath the frame as well?
Great build and great build video. Much more thorough than most. I've decided to remove my smittybilt tent from my truck rack and trailer mount it. My main question is what was your reasoning for having it raise an additional 8" ? And thanks for all the wonderful instructions.
Thank you! When the tent is opened I wanted it high enough so the tent it self could act like a awning of some sort and also so if you mount an awning to the side of the cross bars it will be high enough while set up 👍🏼
You did a great job! I really like your idea on the tent thing and it solved a question I had for a prodject I have in my mind. But how do you bring down the tent to the lower postion?
Great, thanks for the info. I don't know if there is a market for a UTV overland trailer, but I know my 2021 Honda Pioneer 1000-5 can tow 2000lb with no problem. Thanks again.
I'd love to see a video showing the deployment of the tent... the up and the down... not actually setting up the tent. Also... what tent do you have? I'm building a trailer and setting up the tent in a similar fashion, my CVT Ranier says the tents 150-175lbs... which is such a useful weight... with the steel frame under it and other crap I have in the tent I'm hoping my pistons are sized right at 60LBs each.
Whenever I use VHB, I clamp down one end, lift the other, remove the red backing, lay down that end, clamp it and slowly peel as the sheeting falls, you can lay broom handles across the tape before you peel so as to work on your own. As you know, this stuff is not very forgiving and doing it once is best.
Nice trailer. I have a couple questions please. Very well thought out build. 1. You mounted the Tembren's at 40/60 so did you position with the center of the bracket or center of the hub? They are several inches different... 2. Did you weld the cross member between the suspension brackets? I know you bolted them but missed the welded cross piece, if you did. Seems like that much heat on the nylon washers would be bad, but instructions say to weld them. Thanks for sharing.
Thank you for watching! I put the actual spindle where the hub mounts on the Timbren at the 60% back mark. The cross bar is only bolted to each unit not welded.
Cool build man. One question on your design that allows post to pivot (not bind) as the hydraulic struts raise the platform. Since those brackets allow it to pivot, how do you keep it from not moving when the platform is in its top position? Will it shift side to side when climbing in and out the tent or when force is applied in the “pivot motion”?
Thank you for watching! Please don’t forget to Subscribe, Like, & leave a comment and let me know what you think (good or bad)
I’ve actually started a build series for a micro camper as well! I’ll link that below!
👇🏼👇🏼
th-cam.com/video/-paVczY0dBM/w-d-xo.html
Welder I used!
👇🏻👇🏻
amzn.to/3E6yhq7
You can find links to parts in the description!
These are affiliate links so I do get a small commission if you purchase anything thru my link. AT NO EXTRA COST TO YOU! It’s a great way to support the channel.
You can find me on Instagram here👇🏻👇🏻
instagram.com/adv.4x4?r=nametag
New here. You nailed this build! NICE Set-up!
Thank you! Glad you enjoyed it!!
This is rad! Maybe I missed it but what was your estimated cost for this?
Here’s the cost breakdown!
th-cam.com/video/6qhzCKAOx4w/w-d-xo.html
This is one of the best builds I’ve seen. Brilliant design and craftsmanship.
Thank you Eric!!
dude!!!! the Gas struts! Genius Idea
Great video! Your narration was spot on , no unnecessary dialogue. I took lots of notes! My project is at 60% completion and will mirror your build, without the Timberlin! Thanks
Thank you! I try my best to cut out the unnecessary jibber jabber you find in most videos. Would love to see pics of your build when it’s done.
You are a great builder and Teacher. You have inspired me to build my own Square drop trailer. Very informative and you explain the details well. 10/10
I'm new to your channel, just subbed after watching this trailer build. Anyway, my comment regards wiring, In the last 45 years, I have wired more trailers and bikes than I can keep track of. I truely HATE wiring, but I'm very good at it. I NEVER use the connectors supplied. I buy non insulated butt connectors. I slip on heat shrink tubing, crimp my wires, test everything, then solder every connection and then seal with heat shrink. It adds to your build time, but I've never had corrosion in my wire connections. I'm looking forward to watching more of your builds.
Wow, great build! I really enjoyed watching this video and how detailed you explained everything you did. Thank you for sharing your great work.
Everytime I watch this I think, man that little trailer is bad ass!!! Dude great skills there.
Appreciate it man! Had a lot of fun building it
Man, that thing is amazing! Great job! When looking at the tailgate, I thought of a table and sliding or quick release hinges!!! Not sure what the weight is but being able to quickly remove gate that has fold out legs would make a badass portable table for cooking ect. If you had extra hinges on the side or something, you'd only need 2 legs.
If you would 45° all your ends, you would not need to cap the the end of your square tubing. Plus, it seals the tubing from getting water and other stuff inside. Just a tip from 42 years of Fabrication.
Check out the micro camper I built after this! I did exactly that 👍🏼
Just an awesome home build! Getting ready to build myself, but I’m in the trailer industry, so I’m planning on using a factory built frame. Using a cargo trailer frame for the base, 2X4 tube, and doing some mods myself. Thanks for the video!
Sounds awesome have fun! Thanks for watching
Nice build indeed.
I have a couple of thoughts.
Ice, snow, and mud will build up on those runs of wire from the center to the outsides and drag those wires down. I'd suggest using those loop clamps about every 8" or so.
From considerable experience, I can say those fenders will break those welds from vibration. Actually, the fender breaks, just outside the weld in the heat-affected area. I have found that attaching the top of the fenders to the bed sides will eliminate this problem.
You must be a quick learner!!! Those welding spot are professional grade to my eyes!! Outstanding job!
Thank you sir! I learn something every time I weld. I learned a lot on my first trailer build which helped with this one a lot!
What a super build, something you can be proud of.
Thank you Dan! Rewarding experience forsure 👍🏼
I also say great job. I worked as pipe fitter for 40 yrs. I know what it is to fab stuff.
Thank you sir!
5am Pacific time. That was well worth the wait Buddy. Excellent descriptions and explanations of your concept and design. The camera work along with your voice over really made it clear what you were doing and how. It came out awesome, great work.
Was going to let it go live around 12pm EST but figured sooner the better 👍🏼
dude you have great welds and clean asf work. great job
Great build gave me some ideas to incorporate with mine! Overall loved the simplicity of it!
Thanks James!!
As I said I would last night, I have been going through your previous uploads and enjoying every single minute of them honestly!. Your craftsmanship and attention to detail is why the finished product is awesome!. I have been paying attention closely and even picked up on a few new techniques if you will and I'm grateful for that. I definitely want to learn how to weld better if anything so I can truly build something like this and a camper maybe something bigger down the road.. Thanks for everything and sharing the experience and step by step process so we can see just how you did it!. 🙏🙏
I appreciate you taking the time to watch!! So glad you enjoyed the videos!!
very nice. impressed with the craftmanship and engineering of this build.
Thank you Gregory!
Excellent work. Simply beautiful.
Appreciate it! 🤘🏼
And This..... Is how you make a HOW TO /REVIEW Video. Good Job!!!!
Thank you!! Appreciate you watching. Glad you liked it.
Super clean, simple, and practical. Nice job.
Just what I was going for! Simple and rugged with multiple uses.
Get 2 more attachment points for the tongue jack and weld them to the side of the trailer near the wheels. This way if you have a flat on the trailer you can use the tongue jack to change your tire.
That’s a great idea!
That’s a brilliant idea!
From Australia' great video and narration,very enjoyable to watch ,thanks!
Take care!
Thank you Tom! Would love to visit Australia one day
Wow man great job ,there's a lot of knowledge in that machine thanks for sharing your journey wow .fantastic 😊
Your craftsmanship and attention to detail is outstanding! I am thoroughly impressed. I love the use of the struts for your tent and how you have designed and put it all together.
I enjoy following/watching a lot of offroad and overland channels. You've definitely picked up another subscriber and I am looking forward to your future videos!
Thank you Casey! I appreciate you watching and I look forward to providing you with some more content 👍🏼
First of all, excellent work! This is a huge resource for my first trailer build. A few thoughts, I’ll probably go with 2x3 .083 for the frame and use 3x3 3/16 for the spline. I love that aluminum is lightweight but it does corrode and will eventually look dull and gross (even though it’s beautiful right now) maybe raptor line a clear coat over it for the outside of the trailer, I also debated vinyl wrapping it then spraying clear) I probably would have raptor lined the entire frame as any spray paint just doesn’t hold up long term. Sealing the corners with a hard sealant inside the bed would be nice so crap doesn’t build up in the corners. Maybe some tie downs inside the bed for cargo, but that’s all personal preference. I struggle with the height of the tent when trailing being so high. I agree the tent needs to be 6’ up for annex room, etc. ideally I would use 30” linear actuators but I can’t figure out how to mount them outside the box and protect them from the weather. Love that the interior bed is smooth and usable, nothing for anything to catch on. The idea for me would be to use the bottom of the tent to seal against the inside of the trailer so keep the contents dry and the dusty coming off the vehicle out of it. However this greatly reduces storage height for what your bringing camping, so it’s a catch 22. I also debated building like a 10” drawer system 360 degrees around the trailer to seal the contents within the trailer and have the tent raise up from that structure. Obviously trade offs to whatever you do and that’s why it’s rad to build these for ourselves to meet our specific needs. Excellent work, hope you can grow your channel and get some money from the resources you provide.
Thanks James! And thanks for the feedback 👍🏼
The trailer pins to hold it closed, I used that to swap/change my tailgate to a ramp tailgate for loading bikes, easy on/off when you need to change it over.
Nice!
Haven't watched the previous video but looking forwards to it. Great how too and can't wait to see finished prod
Thank you sir! Seems a lot of people have watched the part 2 before part 1 haha
That is an awesome trailer. Great video. Great trailer.
Thank you! I’ve also built a micro camper on the channel as well if you haven’t seen!
@@Adv4x4 awesome. I’ll take a look at that too.
I really enjoyed your build and learned a lot. Wonder if you might consider doing a basic how to for beginners welding video at some point. I don’t really know what a “pro” welder’s work looks like, but I’d say yours was pretty clean.
Thank you! I’m no pro by any means and like most people, I have a lot to learn!
There should be a lot of good videos on TH-cam already by people who are professionals! I’d recommend following those to get started!
Love this build. You are very talented
Thanks so much!!
Freaking awesome build man. Not bad for it being a hobby of yours. Love the attention to detail you put into it.
Thanks dude! I’m glad you liked it!
This is an amazing build.
VHB is fantastic, they use it to build airplane wings!
Nice build! I am about to build something similar. Thanks for the video.
Thank you sir! I’m actually going to be doing a “giveaway” on this trailer very soon! I will upload a detailed video explaining things here very soon! Waiting on some patches to be delivered 👍🏼
Good work. Looks great
Freggin awesome build.
Thanks Rich!
Enjoy that build very cool!
Thank you!
es uno de los mas solidos y presisos que he visto
Gracias!
Nice build. Giving me some great ideas for what I want to build. Question for you, why wouldn’t you use longer gas struts and lower the tent more? Being for off road, you always want weight as low as possible.
I thought about it but the longer you go the $ goes up from what I saw. Comfortable with the 8” raise tent sits about the height of a mid size bed rack on a lifted Tacoma.
Great job !!
You probably could have used rivets for those little corner L-brackets as well.
Thank you!!!
Great build and video
Excellent work!! Great descriptions and designs.
Thanks Tom!
Well done mate 🤙🏼 appreciate the effort to share your experience 👍🏻
Appreciate it! Grateful to be able to share this stuff with ya’ll!
Very clean work.
Thanks Man!
Wow! Great job on that trailer man!!
Appreciate it dude!
Awesome Awesome job well done mate
Thanks I appreciate it!
Nice build , I’ve been looking for ages for a suitable trailer the do something like this not sure I have the skills or tools to do the work you have but gives me some ideas for sure 👍
Anything is possible if you put your mind too it 👍🏼
Great video!! Great work!!
Thank you!
What a great Build Bro
Thanks for checking it out 🤘🏼
AWSOME job
Great video… but why you don’t make the suspension for your trailer?
Thank you! The Timbren suspension is just a great time saving solution 👍🏼
Wow! It’s a great job. I want to make your tent roof rack. I would like to know if your rack move when you go in your rooftop tent ? I saw you put a nuts on each bars but is it enough?
Did you see anything that gives you more than 8" of lift? I like your design but I would like to be able to move it up and down a lot more than that. Thank you! love the build.
Nice job! Turned out awesome
Thanks Bryan!
Awesome video brother! I was intimidated about building my own until I’ve been watching your president in videos, thank you much! Note @ 27:53 something seems out of its “proper” place😉
Appreciate it! But hmm not sure I see what ya mean 😂
Love the gas struts. Can you show how easy it is to stow in the down position? Also, how stable is the RTT tower with tent loaded with people?
End of the video I show it raising up, it’s just reverse order to lower it. It’s An easy 1 person job forsure. And once you lock down the anti wobble bolts on the rack it’s solid 👌🏼
Would this tilt up so tongue is pointing straight up? I'm really wanting to build something very similar to this to tow behind 4runner but want to stand up on tailgate. Or where it stays on axel and and use a block of some kind (2x4) to keep tongue pointing up. Also I concur with previousl comment saying a budget build would be AWESOME! THANK YOU for this video and all the others you've shared.
Gday mate. Great video 👍. Very similar to what I’m thinking for my quad, and 3.7m dinghy on top. I enjoy ur channel.
Another option instead of the tape for ur deck, is sikaflex. Does the same, not rattles and no electrolysis from dissimilar metals in contact. Not sure how the cost would compare, and maybe the sika has a higher possibility to be messy, especially when I’m doing it. Interesting to see ur method.
Thanks again 👍👍
Thanks man!! It’s definitely a great design for hauling quads and dirt bikes to more remote locations.
VHB is used in the fabrication of airplane wings, that stuff is strong, and is an excellent barrier to stop corrosion or any from of galvanic reaction.
@@geographyinaction7814 yeah mate. After I watched this vid I did a little research on it. Looks like an amazing product 👍🍻🎯
Aye, 6am gang
Gotta get a early start 👌🏼
Nice work!
Well done!… ill take one
!
Thank you!
Impressive build.
Thank you!
Nicely done, both build and video!
Appreciate you watching! I try to make them not so boring. Kinda hard to do when it involves so much talking 😂
Thanks for a GREAT video, changed how I want to rebuild our trailer, Looking for more stroke on the strut, we will be running a tent that is 250lbs, would 4 struts raited at 100lbs be too much lift? it will be holding solar panels underneath the frame as well?
Really nice build.
Thank you Manuel!
Nice work mate, enjoyed the vid 👍
Awesome Thanks for watching!
Great built What kind of aluminum did you use
Great project!
Thank you!!
You got me hooked with this videos man.Im binge them like a Mexican lady watching telenovelas 😂😂😂😂. How much a trailer like this cost give o take?
I got a cost breakdown video right here man!!
👇🏻👇🏻👇🏻
th-cam.com/video/6qhzCKAOx4w/w-d-xo.html
Great build and great build video.
Much more thorough than most.
I've decided to remove my smittybilt tent from my truck rack and trailer mount it. My main question is what was your reasoning for having it raise an additional 8" ?
And thanks for all the wonderful instructions.
Thank you! When the tent is opened I wanted it high enough so the tent it self could act like a awning of some sort and also so if you mount an awning to the side of the cross bars it will be high enough while set up 👍🏼
@@Adv4x4 When I build mine, I will make the awning bracket on the trailer push out a bit to clear the Tire well for ARB Tent room.
Excellent work!
Thank you!
This is awesome!! 🔥🔥🔥🔥
Phenomenal build!
Thank you!🙌🏻
You did a great job! I really like your idea on the tent thing and it solved a question I had for a prodject I have in my mind. But how do you bring down the tent to the lower postion?
Simply pull the pins and pull down on the tent until the pins lock into place!
Good work on the build!!! Came out awesome!!
Thanks man!
Fantastic job and video 👍
Appreciate it John!
Great build man!!!
Thanks Javier!
Great, thanks for the info. I don't know if there is a market for a UTV overland trailer, but I know my 2021 Honda Pioneer 1000-5 can tow 2000lb with no problem. Thanks again.
Good to know! Thanks for watching 👍🏼
Great build bro
🙏🏻🙏🏻
Impressive job! Keep up the great work!
Thank you Rodney!
this is so tough !
EXCELLENT build!!!👍👍👍
Thanks Eugene!
You're a great fabricator
Thank you sir!
good looking welds..
Great video!
Thank you!
Great job. You got a new subscriber.
Thank you sir!
Awesome trailer
Thank you sir!
Very Nice indeed!
Thank you sir!
Excellent fab skills, really like the hydraulic lift system. What pull pins did you end up using? Definitely subscribing. Thanks.
Very nicely done.
Thank you sir!
I'd love to see a video showing the deployment of the tent... the up and the down... not actually setting up the tent.
Also... what tent do you have?
I'm building a trailer and setting up the tent in a similar fashion, my CVT Ranier says the tents 150-175lbs... which is such a useful weight... with the steel frame under it and other crap I have in the tent I'm hoping my pistons are sized right at 60LBs each.
The tent on the trailer is just a smittybilt overlander. It weighs I think 135-145lbs I think the same size struts I used would work for you!
Awesome effort
Appreciate it Greg!
Whenever I use VHB, I clamp down one end, lift the other, remove the red backing, lay down that end, clamp it and slowly peel as the sheeting falls, you can lay broom handles across the tape before you peel so as to work on your own. As you know, this stuff is not very forgiving and doing it once is best.
Nice trailer. I have a couple questions please. Very well thought out build. 1. You mounted the Tembren's at 40/60 so did you position with the center of the bracket or center of the hub? They are several inches different... 2. Did you weld the cross member between the suspension brackets? I know you bolted them but missed the welded cross piece, if you did. Seems like that much heat on the nylon washers would be bad, but instructions say to weld them. Thanks for sharing.
Thank you for watching! I put the actual spindle where the hub mounts on the Timbren at the 60% back mark.
The cross bar is only bolted to each unit not welded.
Not sure about the design but I’ll give it a 10/10 for execution...
10/10 for watching. Thanks Andy!
Just found the channel. Awesome content. Going to build a trailer like this soon. What is the thickness of the aluminum sheets?
Thank you! They are .100 of a inch.
Cool build man. One question on your design that allows post to pivot (not bind) as the hydraulic struts raise the platform. Since those brackets allow it to pivot, how do you keep it from not moving when the platform is in its top position? Will it shift side to side when climbing in and out the tent or when force is applied in the “pivot motion”?
Thanks man! There are bolts you tighten up at the base which keep the legs from moving!