Nice, but I would note that you are not supposed to smear the thermal compound around like that. It could result in the formation of bubbles, causing incomplete coverage. You should put a drop of it in the middle of the surface and let the force of the screws press it out.
@@Tgrovez you just mad he could be speaking from experience or maybe did some research 1st and I’ve seen other you tubers just apply a small amount in the middle aswell
Really appreciated this video ... good information. However ... next time, please put the camera exactly opposite from yourself so that we can see what's happening without your right hand blocking the view. Thanks again for a much appreciated video!
@@TheAustralianUnderground Nice! It's difficult finding the i7 model... Still looking. I now have one with the Intel i5, but it only has 2 cores / 4 threads. I'm thinking about upgrading the CPU to the 4 core / 8 thread Intel i7, or just getting a mini-PC with the Ryzen 7 5700u (or even Ryzen 7 5800H), both of which have 8 cores / 16 threads... 🤔. I need something quite beefy as it will be running Jenkins and a bunch of automated front-end Selenium tests (in parallel - the more cores, the faster the tests run). I'll get another for my Gitolite repositories, Samba file share, run WireGuard and OpenVPN, and to host my Wordpress blog etc... Will probably just roll with Fedora...
@@TheAustralianUnderground Yeah, I've seen some of the later models, they're pretty cool, but they're also much more expensive. Ryzen 7 mini-PCs are dirt cheap these days. I've just ordered a Ryzen 7 5700u mini-PC, should arrive tomorrow 😄
Hi, Thanks for the guide, What exactly the ram model you installed? HP site seems did not indicate what memory module is compatible. I look at the comments, no one asks this question yet.
Thanks for the vid! I was curious how I'd get to the RAM and it was so much more straight forward than it looked, looking forward to setting this up as my DAW 😁
What about wattage? I did the upgrade and I get red light flash and beeping. Blink code says power. Is it safe to just up the power supply to a 90 from a 65?
What do i need to swap if i want to make an old company computer into a personal computer? The computer is locked and I dont have access to the bitlock code
Hi, Thanks for the video. Did you ever suffer issue of Fan Detection Error while boot up. The message in POST Error is "901-Chassis Fan Not Detected. (Rear)".
I'm getting the same error only when I put in a 65W CPU, if I switch back to 35W "T" chips the error goes away.. Did you manage to find a solution in the end?
@@stevelee6568 I getting the same error. Have you found a solution, only other fan I could find was a hard drive fan, hope this fixes the error when it arrives.
@@leedawson382 Hi there. Wasn't able to find the right fan so ended up putting in a non-T variant i3 6100 that I had (51W TDP) and the error went away. As long as it's not 65W CPU it's not going to complain.
Thanks for showing me how to properly replace components on this particular machine. I replaced the ssd with a 1tb samsung evo 970 nvme. The i5 6500 should be more than enough for open media vault.
I tried installing the same CPU as show in the video, with the original power supply and I had a boot error. After buying a new PSU DTK 90W 19.5V 4.62A the computer didn't boot either. Anyone has a suggestion or idea of what I am doing wrong?
@@brun0re1s You need to use an i7-6700T processor that operates at the supported 35W. You'll still have 4 cores like the i5, but you'll have 8 threads instead of 4. Those processors can be found for between 80 and 120 bucks on ebay.
I haven't tried more than i7-6700 in saying that for the size with stock fan that'll be as high as I will go, any more powerful, you will have heat management issues.
Little bit concerned that you are using the stock cooler for the upgrade to an i7. The TDP of the i7 is much higher, you could have some serious heat issues, possibly resulting in the cpu thermal throttling.
I got a i7 version, don't know what model it is of the 6700, don't know if it's the regular 6700 or the 6700T, T-version have lower clocks and lower TDP.
My unit is HP prodesk mini 600 G2 with 6400t processor on LGA1151 socket, which i7 processor (6th gen) does it support. Does it need any bios flashing?
Que BIOS has usado para meter esa CPU y que funcione y sería posible hacerlo con un hp elitedeskt 800 G2 mini y con una CPU 6600k o 7600k? Aúnque haya que limitar voltajes y frecuencias
@@EasyFixLaptop what about temp/cooling solution ? Is this noticeably better than the 6500 it already has??? I'll be adding an NVME. This will increse dramatically load times.
Display port doesnt work in my hp elite desk 800 g2 min (i want to use 3 display at a time , vga and 1st dp port works fine but 2nd vga doesn't work) plz guide me .....Is it required driver or anything else ?
Upgrading to i7 which is a more powerful cpu, how is the heat? Can the fan still keep it cool? I saw the processor box includes a tower heatsink and fan, hopefully the small heatsink and fan included in the microPC is enough to dissipate the heat from the core i7.
@@jorgesoto8948 I want to change it too. I have HP Elitedesk 800 G2 65W. The power supply is 90W. I am currently using an i5 6400T processor. In the HP user manual it shows that it supports i7 6700. There is a cooler on the processor, but it does not have a fan. The fan is only on the ram. How did you do it?
Hello I have a question, this type of pc could be used for game? I found a seller who put in the description it could play fortnite, apex, gta v.... It have a i5, 8 ram, 256ssd. I don't know nothing about pc, it is for my nephew, for school but if it could also for videogames is a plus, but I don't know if it is fake or what.
I have a HP g2 260 which is worst than this one and I built it for basic gaming, Ryzen 5, 16gb ram ddr4, 250 ssd, 1tb hdd (externar obviously) and I bought an adapter for graphics card to make a EGPU, I do no't recommend it, you're most likely going to spend the money to buy a decent pc but it's possible.
What BIOS have you used to put that CPU and that it works and would it be possible to do it and with a 6600k or 7600k CPU? Even if you have to limit voltages and frequencies
@@Tgrovez no, the fan works well for the 6600k at least for the use that is given to the pc which is office automation, playing games that do not need a lot of graphics and playing multimedia content, using a good thermal paste helps a lot, and regarding the i7 I don't know if it would work I would say no since it is almost certain that the microcodes are not implemented in the bios of this mini pc, but I can't tell you either because I haven't had that cpu and I couldn't prove it
Good video, however i would not be putting a desktop i7 cpu in this tiny PC. These are meant to run off the 35W T versions (there are also versions that of T that run at 45W).
@@mcgillm5149 I would not be putting a 65W CPU in such a small case. 65W is a LOT of max heat to dispose of. Granted, most of the time the max CPU will be pushing is around 40W (I have tested a I5-3330S at CB15 MC for 10x and it was putting out max 38W, Blended prime 95 after 20 min was 42W, the 4th gen will be few more W more). Still, at such Q the fan will be flowing like crazy. I just finished building fully silent office PC with ITX case, the best thing about it is the total Silence.
Amazes me how many posters on you tube don’t take ANY anti static precautions. I used an anti static mat and a wrist band. Both were earthed to an Earth pin on the mains plug with a dummy 3 pin plug.
You don’t need any of that if you know wtf you’re doing lol. Same with a battery in a car. They say to unplug the battery before working on a car but unless you’re a dumbass, no need to.
Hello could someone give me some advice about an Intel Dual Band AC 9560 9560NGW 802.11ac 1.73Gbps BT 5.0 NGFF CNVI Internal Wifi Card. Will work in the Elite 800 G2 Mini 65 Watts? What card will work if this one does not? Thanks!
I noticed that you replaced an i5 6500t, which is a low power, 35watt TDP processor, with an i7 6700, which is a high power, 65watt TDP processor. I also noticed that you have the same 35watt TDP system as I have. Did the 65watt TDP processor work in the 35watt TDP system? If so...this is an amazing thing because normally a 35watt TDP system will only work with a low power TDP processor, the one that ends with (t). If this worked for you please let me know as I too would like to upgrade my 35watt system with a higher TDP processor. Thank you...
I use this PC in my corp. but it run with hard disk very suck on Windows10. so slow and work on office files sometime get freezing also request upgrade SSD is impossible. I'm insist to postpone work, I'm unable to work with this stupid PC.
Hello sir main Mathura se hun Maine HP ka mini yahi jo aap video mein dikha rahe ho aasahi Maine kharida hai main iske andar ka aapko photo send karke dikhana chahta Hun ki main ismein क्या-क्या upgrade kar sakta hun dukandar mere se kuchh bhi nahin Kah Raha Hai use knowledge kam hai aur aapke mein andar bahut sara saman lag raha hai mujhe yah sabhi chahie apne me please help me bilkul Anjan Hai computer ke mamle mein koi Salah dene wala nahin Hai 🙏🏻
Very Bad CPU installation. The heatsink compound was not properly cleaned from the heatsink back. The Compound on CPU was so much it will hinder the proper transfer anyways. You need right amount of it to work effeciently.
Can’t watch your whole video cause you’re not saying what you’re putting in. If you’re doing a rebuild, it’s nice to let us know what you’re putting in.
You're selling this build way short by sticking with the SATAIII SSD. Throw that out and put in a PCIe/NVMe v3 x4 SSD and you'll get 2+Gb/sec throughput!
Nice, but I would note that you are not supposed to smear the thermal compound around like that. It could result in the formation of bubbles, causing incomplete coverage. You should put a drop of it in the middle of the surface and let the force of the screws press it out.
The heat from the CPU will work the bubbles out. No worries.
@@Tgrovez Not necessarily. I've seen processors get fried becouse of bubbles. It's best to follow manufacturer recommendation in this case.
@@michaeltaylor5939 OMG just shut the fuck up! You haven't seen shit. Another "Internet know it all" over here.
@@Tgrovez you just mad he could be speaking from experience or maybe did some research 1st and I’ve seen other you tubers just apply a small amount in the middle aswell
@@michaeltaylor5939 ⭐️⭐️
I would be pleased if you answer. Were you satisfied with the i7 6700 processor after long use? Did the mini PC experience any malfunctions?
65w power adapter or must be 90w for the new processor?? ... please answer me
isnt there an m.2 slot under the hdd casing
Really appreciated this video ... good information. However ... next time, please put the camera exactly opposite from yourself so that we can see what's happening without your right hand blocking the view. Thanks again for a much appreciated video!
Thanks for the tip
Thanks so much for this video - very helpful. I'm thinking about getting one of these to use as a home Linux server. In 2023, they're dirt cheap!!!
I have 4 of these as home servers lol. Fantastic and really good for developing multi-server applications in a test environment
@@TheAustralianUnderground Nice! It's difficult finding the i7 model... Still looking. I now have one with the Intel i5, but it only has 2 cores / 4 threads. I'm thinking about upgrading the CPU to the 4 core / 8 thread Intel i7, or just getting a mini-PC with the Ryzen 7 5700u (or even Ryzen 7 5800H), both of which have 8 cores / 16 threads... 🤔. I need something quite beefy as it will be running Jenkins and a bunch of automated front-end Selenium tests (in parallel - the more cores, the faster the tests run). I'll get another for my Gitolite repositories, Samba file share, run WireGuard and OpenVPN, and to host my Wordpress blog etc... Will probably just roll with Fedora...
@@MnemonicCarrier I think some of these can handle 300 series 9th gen coffee lake.
@@TheAustralianUnderground Yeah, I've seen some of the later models, they're pretty cool, but they're also much more expensive. Ryzen 7 mini-PCs are dirt cheap these days. I've just ordered a Ryzen 7 5700u mini-PC, should arrive tomorrow 😄
Hello,
Nice video thank you for the insight as to how to upgrade. But
exactly which i7 processor and RAM did you upgrade to, on this computer? thanks
Looks like 2x 8gb RAM
It's in the description with links to amazon.
Can I use the same processor on th hp 260
Why didnt you add m.2 ssd? And clean CPU cooler?
Hi, Thanks for the guide, What exactly the ram model you installed? HP site seems did not indicate what memory module is compatible. I look at the comments, no one asks this question yet.
If you haven't yet, got to Crucial and search by computer name.
Thanks for the vid! I was curious how I'd get to the RAM and it was so much more straight forward than it looked, looking forward to setting this up as my DAW 😁
Anyone curious about the RAM, the one I ordered for reference is labeled as Samsung DDR4-2133 8GB/512Mx64.
How well does it work with your DAW?
@@gaymergrill Does it max out with 16 or will it take 32?
@@BEDavisBrown 32gb max, 1tb ssd storage max
that sounds DAWGAWN good!
I just tried to install a 6600 CPU in one of these in the light is flashing red what should I do
What about wattage? I did the upgrade and I get red light flash and beeping. Blink code says power. Is it safe to just up the power supply to a 90 from a 65?
You must upgrade to 90w (saw in another video)
Does anyone know about the limits of the motherboard? Whats the best CPU/RAM I could put in it?
I have a HP Elitedesk 4 800
Have you tried 7th Gen CPUs on this system? Do they work?
hi can i get a link to where you purchased the CPU part number and all? Thanks
Hello friend, can I ask you a technical question regarding an update??? from an i3 6100t processor to an i3 7100t that doesn't work for me.
What do i need to swap if i want to make an old company computer into a personal computer? The computer is locked and I dont have access to the bitlock code
Bitlock is attached to your SSD, so either wiping it out sometime works. If not replace the SSD or HDD.
what power adapter are you using? 65w?
I’d like to know as well.
To upgrade the CPU, you need a 90W power supply.
For the ssd, does it have m.2 slot for boot drive and you can use the 2.5 for hdd for storage?
G1，G2 all have M.2 slot
G1 no boot without bios mod
Sir ifhp thin client t630 also capable of changing cpu and GPU please tell
Its not Small Form Factor. Its micro pc. Nice video. :)
Hi, Thanks for the video. Did you ever suffer issue of Fan Detection Error while boot up. The message in POST Error is "901-Chassis Fan Not Detected. (Rear)".
No I didn't. Did you make sure, the chassis is fully enclosed.
I'm getting the same error only when I put in a 65W CPU, if I switch back to 35W "T" chips the error goes away.. Did you manage to find a solution in the end?
It was resolved. Connecting the compatible rear fan will be able to bypass the fan error warning.
@@stevelee6568 I getting the same error. Have you found a solution, only other fan I could find was a hard drive fan, hope this fixes the error when it arrives.
@@leedawson382 Hi there. Wasn't able to find the right fan so ended up putting in a non-T variant i3 6100 that I had (51W TDP) and the error went away. As long as it's not 65W CPU it's not going to complain.
can we upgrade to the non-T version Processor?
yes
it just need to fit the motherboard
@@deathstricker8624 so Watt is just a number do you think 35w can be replaced with 84w?
it is possible as the mini pc already has a powersupply enough for it@@imstrfan8749
I have one of these but it comes with 16 GB of DDR4 RAM,does this have like 4GB before this ?
Thanks for showing me how to properly replace components on this particular machine. I replaced the ssd with a 1tb samsung evo 970 nvme. The i5 6500 should be more than enough for open media vault.
How many nvme drives can be installed in this pc?
@@SK-qu4wo one m.2 ssd and one 2.5 inch ssd.
@@nit3h8wk81
Thanks. Does it have an HDMI port on the back or do I need to buy an adapter for the display port?
@@SK-qu4wo It only has display port. Lucky for me I only needed the display connected for the initial install of openmediavault.
@@nit3h8wk81 Where's the m.2 SATA slot? I couldn't see it in this video. I'm thinking about getting one of these to use as a home Linux server.
does this run hot, i have a 705 which runs hot and im trying to make it run cooler by replacing the fan or thermal paste
Could I do this to my 600 G3 ?
Nice work !
What was the old CPU, did you update the bios or something to make the MB compatible with the processor ?
Cheers !
Thanks for watching! If I remember correctly, it was i5-6500T
@@EasyFixLaptop Thanks a lot for your response ! 😁
@@EasyFixLaptop oof
I see why you upgraded it
What kind of wlan card would this pc support?
WHAT WAS IT BEFORE YOU UPGRADED
How do I remove the accumulated dust inside this PC ?
I tried installing the same CPU as show in the video, with the original power supply and I had a boot error. After buying a new PSU DTK 90W 19.5V 4.62A the computer didn't boot either. Anyone has a suggestion or idea of what I am doing wrong?
update bios
That didn't work either
@@brun0re1s You need to use an i7-6700T processor that operates at the supported 35W. You'll still have 4 cores like the i5, but you'll have 8 threads instead of 4. Those processors can be found for between 80 and 120 bucks on ebay.
What's the absolute highest performing processor this this will take and be able to effectively cool with stock fan?
I haven't tried more than i7-6700 in saying that for the size with stock fan that'll be as high as I will go, any more powerful, you will have heat management issues.
@@EasyFixLaptop Any idea if this would take the 7th gen I7 7600T? They're the same socket 6th/7th gens.
is this unit safe to buy pre-owned? or used?
Is that desktop processor or laptop processor???
Little bit concerned that you are using the stock cooler for the upgrade to an i7. The TDP of the i7 is much higher, you could have some serious heat issues, possibly resulting in the cpu thermal throttling.
This model come both with i7 and i5 with exactly same setup
I got a i7 version, don't know what model it is of the 6700, don't know if it's the regular 6700 or the 6700T, T-version have lower clocks and lower TDP.
@@EasyFixLaptop was it i7-6700 or i7-6700T
My unit is HP prodesk mini 600 G2 with 6400t processor on LGA1151 socket, which i7 processor (6th gen) does it support. Does it need any bios flashing?
Support what?
assuming you dont cook the vrms and have a whigh enough wattage psu, should support any 1151 6th gen cpu
Does it have m2 slot and mini pcie wifi slot?
I didn't check the area under the hard drive, but as someone else mentioned, there might be Pcie connector for m.2
Both porta available. A 2242 for the wifi/BT module and another 2280 size for storage
Can I change the case??
Wow, that seems like a lot of thermal paste.
Nice work. you are inspiring me. What is the i7 cpu model number?
Thanks for watching! SR2L2 (i7-6700)
Que BIOS has usado para meter esa CPU y que funcione y sería posible hacerlo con un hp elitedeskt 800 G2 mini y con una CPU 6600k o 7600k? Aúnque haya que limitar voltajes y frecuencias
@@EasyFixLaptop what about temp/cooling solution ? Is this noticeably better than the 6500 it already has??? I'll be adding an NVME. This will increse dramatically load times.
Seem the CPU is more expensive than the whole computer.
Which gen CPU did you use for the upgrade?
i tried install memuplay emulator it got stuck tried restarting now it starts but nothing appears on my display, how can i fix that
Display port doesnt work in my hp elite desk 800 g2 min (i want to use 3 display at a time , vga and 1st dp port works fine but 2nd vga doesn't work) plz guide me .....Is it required driver or anything else ?
is it work for LGA 1155 socket processor too?
Does this machine accept nvme m.2?
Upgrading to i7 which is a more powerful cpu, how is the heat? Can the fan still keep it cool? I saw the processor box includes a tower heatsink and fan, hopefully the small heatsink and fan included in the microPC is enough to dissipate the heat from the core i7.
You can modify fan speed on bios trust me is good, I did that to mine
@@jorgesoto8948 I want to change it too. I have HP Elitedesk 800 G2 65W. The power supply is 90W. I am currently using an i5 6400T processor. In the HP user manual it shows that it supports i7 6700. There is a cooler on the processor, but it does not have a fan. The fan is only on the ram. How did you do it?
great Video can see quiet a bit thank you
Does the processor you are upgrading have to be 6th gen, or it can be whatever you want?
You absolutely cannot put “whatever you want” in there. Knowing Intel, only 6th gen will work.
@@matthewh940 Makes sense.
@@maple_leaf0 mine says it’s 3.2 GHz ryzen_5 AMD Radeon Vega 11 is that intergrated or can i just buy a cpu no intergrated
Avec cette configuration , il peut installer Windows 11 ?
If this thing had room for 2.5 hdd x2, then it would be so perfect. It could be used for raid hdd enclosure in the future when it gets really cheap.
It has an NVME slot under the ssd carriage so you can have 2 drives installed.
3:57 bro flipped his monitor 💀💀💀
any solution to stabilize the temperature in this device? I already changed the thermal paste but it is still very hot
Get bigger fan
You can do some holes in the cover as well
@@EasyFixLaptop bigger fan??? does HP got the alternative fan choice?
Can you tell me which i7, it accepts? Thank you very much and, excellent explanation
He used an i7 6700. 7700 should work too. You should use the t (6700t, 7700t) variants if you want to stay at 35W power envelope.
@@mifili64 does the k cpu work on the sff version of the Elitedesk G2? Presumably 6700k or 7700k?
@@Sturmgeist978 Those chips should work too, but I am afraid they will overheat.
@@mifili64 ah, I'll just use the 6700 from the manual. Thank you for the tip, that was really helpful for my build.
@@Sturmgeist978 just don't buy any F CPUs they don't have iGPUs
Why the dislikes? Ya came to see a guy upgrade to i7.........thats whats here.
Max ram support?
Hello I have a question, this type of pc could be used for game?
I found a seller who put in the description it could play fortnite, apex, gta v....
It have a i5, 8 ram, 256ssd.
I don't know nothing about pc, it is for my nephew, for school but if it could also for videogames is a plus, but I don't know if it is fake or what.
I have a HP g2 260 which is worst than this one and I built it for basic gaming, Ryzen 5, 16gb ram ddr4, 250 ssd, 1tb hdd (externar obviously) and I bought an adapter for graphics card to make a EGPU, I do no't recommend it, you're most likely going to spend the money to buy a decent pc but it's possible.
Does it have pci express slot for graphics card?
no its too small
EXTERNAL GPU
no, but you could use a external pci espress slot via usb and connect a gpu with a psu
i failed to upgrade, the bios prompted missing back fan
you don't have this error?
Oh so it IS upgradable.
Basically, cooling and space aside, it's workable.
What BIOS have you used to put that CPU and that it works and would it be possible to do it and with a 6600k or 7600k CPU? Even if you have to limit voltages and frequencies
Not the K series. You might get away with just a plain desktop processor 6600.
@@Tgrovez i use the 6600k and Works great.
@@miguelmartibelmonte How do you keep it cool though? Wouldn't it melt the little fan that's on there?
@@miguelmartibelmonte So if 6600k works, what If i step it up to an i7? I need more threads.
@@Tgrovez no, the fan works well for the 6600k at least for the use that is given to the pc which is office automation, playing games that do not need a lot of graphics and playing multimedia content, using a good thermal paste helps a lot, and regarding the i7 I don't know if it would work I would say no since it is almost certain that the microcodes are not implemented in the bios of this mini pc, but I can't tell you either because I haven't had that cpu and I couldn't prove it
wie kann ich denn in das boot menue kommen
What's the maximum RAM the G2 800 can handle?
Yo le puse dos módulos de 16gb (32 en total) y funciona ok. Creo que 32 es lo máximo.
Upgrade ka bad computer me kya kya settings change karna iske uper ek video bana do na bahiya PLZZ
Good video, however i would not be putting a desktop i7 cpu in this tiny PC. These are meant to run off the 35W T versions (there are also versions that of T that run at 45W).
It also allows for 65w CPUs, but you need to have the larger power brick for it.
@@mcgillm5149 I would not be putting a 65W CPU in such a small case. 65W is a LOT of max heat to dispose of. Granted, most of the time the max CPU will be pushing is around 40W (I have tested a I5-3330S at CB15 MC for 10x and it was putting out max 38W, Blended prime 95 after 20 min was 42W, the 4th gen will be few more W more). Still, at such Q the fan will be flowing like crazy. I just finished building fully silent office PC with ITX case, the best thing about it is the total Silence.
Amazes me how many posters on you tube don’t take ANY anti static precautions. I used an anti static mat and a wrist band. Both were earthed to an Earth pin on the mains plug with a dummy 3 pin plug.
lol
You don’t need any of that if you know wtf you’re doing lol. Same with a battery in a car. They say to unplug the battery before working on a car but unless you’re a dumbass, no need to.
Can we upgrade Intel's i7 processor in this
Looks like you haven't watched the video, thats what the video is about. Cheers
i mean you’d need a cpu with integrated graphics
Nice video thank you
may I know if it supports i5 7500?
Yes it does
Would the motherboard support the Core i7-6700K that is listed to have a Wattage
91 watts? The power supply for the unit is 90 watts.
I need this type of CPU, where can i get it in Delhi
at the CPU market delhi bro
Perhaps for you next video, you might show us a little less footage of the back of your hands.
So I guess windows was preloaded?
Can you add a a GPU to it ?
You can but you'll have to add it externally.
Hello could someone give me some advice about an Intel Dual Band AC 9560
9560NGW 802.11ac 1.73Gbps BT 5.0 NGFF CNVI Internal Wifi Card. Will
work in the Elite 800 G2 Mini 65 Watts? What card will work if this one does not? Thanks!
Have you found the hw compatibility list from HP?? I think you'll find that detail there.
Motherboard name?
I noticed that you replaced an i5 6500t, which is a low power, 35watt TDP processor, with an i7 6700, which is a high power, 65watt TDP processor. I also noticed that you have the same 35watt TDP system as I have. Did the 65watt TDP processor work in the 35watt TDP system? If so...this is an amazing thing because normally a 35watt TDP system will only work with a low power TDP processor, the one that ends with (t). If this worked for you please let me know as I too would like to upgrade my 35watt system with a higher TDP processor. Thank you...
I've heard you need to use a higher powered power supply for it to boot.
@@djcymatic So did you use a 60 watt cpu with a higher wattage power supply or no?
Does this apply to G3 form factor does anyone know?
yes they are almost identical inside
If this is an lga1151 couldn’t we put in a 9700k? Lol
Can this pc take 7th gen cpu?
Yes, tho the socket is the same. You can need to update the BIOS to accept the new change.
Can we add graphics card ???
CAN AN 7 CPU JUMP TO A 9 CPU
you dont need that much paste
If you know what you are doing, then you don't need to watch ;)
@@EasyFixLaptop bad answer man!!
@@EasyFixLaptop what a gentleman!
What i7 is that ?
oh...nvm that...i saw it at the end :) ...anyway...is there a m.2 slot on the MB so you cand insert a ssd on the MB ?
Not on this one, only 2.5" is all you can hope for
That i7 gonna straight broil itself in that case.
Would've have been better if the camera was in the opposite direction and the monitor was upright.
This pc is the 35w version so it has the t cpu
You probably didn’t notice that this system has NVMe slot.
Is that ok to run Fortnite with this config ?
Nice Video. Way way WAAAAAY to much thermal paste buddy :)
I use this PC in my corp. but it run with hard disk very suck on Windows10. so slow and work on office files sometime get freezing also request upgrade SSD is impossible. I'm insist to postpone work, I'm unable to work with this stupid PC.
God damn that is a ton of thermal paste
Hello sir main Mathura se hun Maine HP ka mini yahi jo aap video mein dikha rahe ho aasahi Maine kharida hai main iske andar ka aapko photo send karke dikhana chahta Hun ki main ismein क्या-क्या upgrade kar sakta hun dukandar mere se kuchh bhi nahin Kah Raha Hai use knowledge kam hai aur aapke mein andar bahut sara saman lag raha hai mujhe yah sabhi chahie apne me please help me bilkul Anjan Hai computer ke mamle mein koi Salah dene wala nahin Hai 🙏🏻
Very Bad CPU installation. The heatsink compound was not properly cleaned from the heatsink back. The Compound on CPU was so much it will hinder the proper transfer anyways. You need right amount of it to work effeciently.
Can’t watch your whole video cause you’re not saying what you’re putting in. If you’re doing a rebuild, it’s nice to let us know what you’re putting in.
Sorry, but the processor is very expensive, more expensive than of the mini PC 🤔
Yes indeed, I recycled it from all busted PC costing me $100 AUD total.
You're selling this build way short by sticking with the SATAIII SSD. Throw that out and put in a PCIe/NVMe v3 x4 SSD and you'll get 2+Gb/sec throughput!
Does anyone know if I can install an nvme M2 disk on the HP EliteDesk 800 G1 Desktop Mini?
Thanks! Now I can add more memory and see if this POS actually works...lol
lol too many thermal paste haha
He needed to put more