Alfred you're the King of RIBs. I didn't know anything about them until I began watching your channel a year ago. I now have a greater appreciation for the work involved in restoration and how they're built. Thank you and to Alamar Boat Solutions in Hialeah Florida for insight and education of the hard work involved in RIB restoration.
Nicely done, thanks for the video. I have a 1997 Rendova 14 foot with original hypolan tubes which are in relatively good shape. There are however a few spots and the rear and along the front edges where the rub rail is coming loose. While ripping the rub rail, sanding and reapplying would be ideal, can I simply sand and reglue the parts that are coming undone? What type of adhesive do you recommend, Orca Hypalon glue is expensive and I only need a small amount, can I get away with using Clifton?
Wow you left it nuevecito. Great job. Oye I thought I would come to Miami and enjoy some warmth. I got here Wednesday and it’s been cool and crappy. Just my luck after the Texas snow. Geeee
Great job guys. What type of glue did you use? I have a 20+ years old 13-foot Avon with small sections that came loose. I don't know that I would tear the whole thing off but hope to dress it up.
The only thing missing from this vid was how much adhesive you need. I can only find 8 oz cans of this stuff and I am hoping it will be enough for a 10.1 rubrail refit.
Awesome job, I noticed ur wife’s car in the background and ur expedition, by the way how long have u had that expedition??? Does ur wife do ur guys books and all that?! Like all the office work? And I can’t wait to see more videos like this one bub, I’ve been jonesing for some restorations and what’s up with the restorations that u have going on in ur back yard?!
Hey dude, I’ve been watching your page and learning a lot from it. I currently have a pvc type tube and I’m trying to attached it to its fiber glass hull. But I need a new pvc fabrics and I can’t seem to find a place where to buy them. Do you have any recommendations where to buy at least 30ft by 8inches of pvc fabric? All I find is patches online and they’re seems to be so expensive. Thank you Appreciate it!
I’ve been following your channel.👍nice job. I’m looking for a used rib tube for a 15 ft fiberglass hull. As long as it still holds air, it is good. I’m having a project. If can help me with this. Just PM me.thank you very much.
yeah, i went to that place and they want to charge me $4000 for a 42 rubrail replacement on a 19 foot boat, they went ahead and offer me a new tube for $9000 dude this tube is 2 years old, those people on that shop are money hungry
Alfred you're the King of RIBs. I didn't know anything about them until I began watching your channel a year ago. I now have a greater appreciation for the work involved in restoration and how they're built. Thank you and to Alamar Boat Solutions in Hialeah Florida for insight and education of the hard work involved in RIB restoration.
We almost forgot what Mr. Alfred Montaner does! A man of many talents! It’s not all about the Chit Show lol
That's my passion Mr Montaner 😉
We missed this content 😍
I love the smell of that glue. Great job guys.
Great to see you back making these videos
Nicely done, thanks for the video. I have a 1997 Rendova 14 foot with original hypolan tubes which are in relatively good shape. There are however a few spots and the rear and along the front edges where the rub rail is coming loose. While ripping the rub rail, sanding and reapplying would be ideal, can I simply sand and reglue the parts that are coming undone? What type of adhesive do you recommend, Orca Hypalon glue is expensive and I only need a small amount, can I get away with using Clifton?
Great job! What kind of glue did you use?
Hi ferdz I'm working at the factory.we are always problem to lay out the rub rail sometimes it's good to look Ang sometime is bad.
An amazing transition, great work bro and your crew....y’all rock for real!!!!!
Awesome job! What kind of glue did you use for the rubrail???
Wow you left it nuevecito. Great job. Oye I thought I would come to Miami and enjoy some warmth. I got here Wednesday and it’s been cool and crappy. Just my luck after the Texas snow. Geeee
you brought the cold Gman !
@@AlfredMontaner I did I did
Gentle ass work, Great Job Fellas. Badass Amazingness!!!
Legends you and your AMAZING crew.
This is awesome Alfred! Great job
Nice job, cuanto cuesta ese trabajo ?
Alfred , Can you tell us the cost on this project ? It came out great . Thanks again all great videos . Jimbo
Great job guys. What type of glue did you use? I have a 20+ years old 13-foot Avon with small sections that came loose. I don't know that I would tear the whole thing off but hope to dress it up.
What other type of glue can I use to glue the rubrail on hypalon?
what kind of glue do you use?
where are you guys located and what do you charge to re tune a caribe 13 inflatable?? Don
Looks great Alfred way to go 👍👍
What glue did you use on this need to do same to mine?
Wondering what you would use to get black spots out of the rubrail?
The only thing missing from this vid was how much adhesive you need. I can only find 8 oz cans of this stuff and I am hoping it will be enough for a 10.1 rubrail refit.
Awesome job, I noticed ur wife’s car in the background and ur expedition, by the way how long have u had that expedition??? Does ur wife do ur guys books and all that?! Like all the office work? And I can’t wait to see more videos like this one bub, I’ve been jonesing for some restorations and what’s up with the restorations that u have going on in ur back yard?!
Great video, Sir!
Awesome. Thanks!
Nice work bro
I sure appreciate
Hey dude,
I’ve been watching your page and learning a lot from it. I currently have a pvc type tube and I’m trying to attached it to its fiber glass hull. But I need a new pvc fabrics and I can’t seem to find a place where to buy them. Do you have any recommendations where to buy at least 30ft by 8inches of pvc fabric? All I find is patches online and they’re seems to be so expensive.
Thank you
Appreciate it!
Try inflatableboatparts.com
excellent video / Inflatables rock....
I wonder if it’s sold yet
very impressive
Nice work..!
Interesting video👍
Really cool content!
Glue info please?
🤘
Alfred is resin adhesive glue any good for pvc
Use pvc glue other glues dont work well on pvc
@@AlfredMontaner Alfred have you heard of the solar marine boat
The company is telling me that the material is pvc and it's resign with resin adhesive glue
Is resin adhesive any good for pvc
I’ve been following your channel.👍nice job. I’m looking for a used rib tube for a 15 ft fiberglass hull. As long as it still holds air, it is good. I’m having a project. If can help me with this. Just PM me.thank you very much.
yeah, i went to that place and they want to charge me $4000 for a 42 rubrail replacement on a 19 foot boat, they went ahead and offer me a new tube for $9000 dude this tube is 2 years old, those people on that shop are money hungry
👏👏👏👏👏👏👍👍👍👍👍👍
Get a tripod want to see you getting your hands dirty
I'd clean it after I told him to clean out his locker.
Bro
No one wants to work anymore
He probably should have called first
what’s the shops phone number
and address