I hope I never have to do that. It looks worse than you described. Good luck with the repair and my wife and are looking forward to the next episode! We always like to see the good with the bad.
Hypalon and PVC have different specific adhesives and thinners. For example, Toulene for Hypalon, MEK for PVC. Also, if you do accidentally touch a small spot when trying to position the patch and cannot get it to release, a simple dip of the brush in the appropriate solvent, and work it against the stuck part, and it will come free to reposition.
Hypertex is different. work in the shade or early morning before any heat from the sun. Lint free cloth wipe patch area three times 5 minutes apart with Methyl Ethel Ketone M.E.K. First pass removes oxidized surface, second softens, third wipe with a new clean towel each time, prepares the surface. Next, mix 1/3 weaver with 1/3 hardener and 1/2 OZ (shot glass) of toluene, I mix with a bent coat hanger on a drill, about 5 inches long with a (L) bend. On really hot days I use more toluene. Use the brush three times to apply glue to all surfaces 5 minutes apart, (use egg timer) be exact, really thin. If the glue dries too fast after prep, wipe with MEK once and get the patch on within 3 minutes, work fast, be firm and I personally use a car tire repair roller. Do not use the boat for a week, do not air up over 1 psi, Caution the fumes inside the boat are extremely flammable, so I let the air out to 50% and pump in good are several times over the course of 4 days.day one do nothing. Never let the boat deflate all the way. I have a leak at my transom at the port side where the floor meets, will be cutting access opening to patch the transom leak, access point will be 12-14 inches forward of the port tub and the access will be at 10 to 11 o'clock, elbow size, help is required to keep the tube inflated- this technique is kinda like Arthroscopy surgery. interior patching is easy.
Hi! I saw you used the Weaver Adhesive. How does it work so far? I want to use it to fix a 8" open seam on my Sea Eagle inflatable kayak. My kayak only requires 3.2 psi so I hope the adhesive on the PVC can hold that pressure. Any recommendations or ideas would be great.
Great repair video Thx , it’s happened to also. West marine sells a liquid sealant for all inflatables which I used as an added insurance After my repair. Thank God no leaks . Check it out , it’s expensive
Can you use the same method when patching a hole the size of a half dollar maybe a little smaller I’m having a hard time trying to patch mine I think the next approach is an inside patch but mine is a hole not a tear
I would be very worried about leaks around the tube seam that the patch went over. I kept waiting for you to comment about that seam. Doesn't the seam create a small pocket for that air can escape from? It seems it would be hard to form the patch completely around the seam.
I though of that when I was doing the repair, but there was just enough space between the tear and the seem to make a seal. Surprisingly, the patch laid quite nice over the seam... 6 months later, that is the tube that holds air the best.
Nice job. I used Tear Aid to seal the inside of the tube. Then applied a bead of 3M marine sealant to the tear. It was a "T" shape rip and I needed to keep it from separating. I'm putting on another piece of Tear Aid on the outside and then a PVC patch with adhesive. Good detailed video.
I'm in UK, what a nice place you have to repair a dinghy, does this method work in sub zero temperatures with hale and wind? Ha ha, great repair, hope you had sun cream on?
Tolulene is the preferred solution on hypalon, on pvc mek is required tolulene isnt ideal, m.e.k will soften the surface of pvc allowing the glue to make a chemical bond where as tolulene will not..ta
We recently got a ‘big ass tear’ in our dinghy and felt really discouraged on doing it ourselves until we saw this video. Thanks so much for sharing! Can you share how this has held up for you?
Do not use flex tape on inflatable boats! We tried it on our pvc inflatable kayak. It rippled and the glue oozed out to a sticky mess nightmare. Took a ton of "glue be gone" once we easily pulled off the tape, and weeks of rubbing. Then we patched it the correct way with marine products.
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
Didn't get passed the intro, I already like this dude. +1 to subscribers
Thanks for the help I am in need of patching my carabi so thanks. You have been a big help to us and we absolutely appreciate it.
Great job. Thanks for the double side patch recommendation.
I have a Klepper that has a cut in the hypalon hull. This is the best vid I have seen on patching with two part adhesive. Thanks - J
You don't need to part adhesive, 3M 4200 would do the trick permanently
I hope I never have to do that. It looks worse than you described. Good luck with the repair and my wife and are looking forward to the next episode! We always like to see the good with the bad.
Thanks for the informative video, no waste o time.
Doing this in the water, amazing!
Good job Nick 😀👍
Great video!
Thanks for this. Great informative video.
Thanks Rory. I did another patch last week... had to watch my own video to remember how 😂
Hypalon and PVC have different specific adhesives and thinners. For example, Toulene for Hypalon, MEK for PVC. Also, if you do accidentally touch a small spot when trying to position the patch and cannot get it to release, a simple dip of the brush in the appropriate solvent, and work it against the stuck part, and it will come free to reposition.
Hypertex is different. work in the shade or early morning before any heat from the sun.
Lint free cloth wipe patch area three times 5 minutes apart with Methyl Ethel Ketone M.E.K.
First pass removes oxidized surface, second softens, third wipe with a new clean towel each time, prepares the surface.
Next, mix 1/3 weaver with 1/3 hardener and 1/2 OZ (shot glass) of toluene, I mix with a bent coat hanger on a drill, about 5 inches long with a (L) bend.
On really hot days I use more toluene.
Use the brush three times to apply glue to all surfaces 5 minutes apart, (use egg timer) be exact, really thin.
If the glue dries too fast after prep, wipe with MEK once and get the patch on within 3 minutes, work fast, be firm and I personally use a car tire repair roller.
Do not use the boat for a week, do not air up over 1 psi, Caution the fumes inside the boat are extremely flammable, so I let the air out to 50% and pump in good are several times over the course of 4 days.day one do nothing.
Never let the boat deflate all the way.
I have a leak at my transom at the port side where the floor meets, will be cutting access opening to patch the transom leak, access point will be 12-14 inches forward of the port tub and the access will be at 10 to 11 o'clock, elbow size, help is required to keep the tube inflated- this technique is kinda like Arthroscopy surgery. interior patching is easy.
Hi! I saw you used the Weaver Adhesive. How does it work so far? I want to use it to fix a 8" open seam on my Sea Eagle inflatable kayak. My kayak only requires 3.2 psi so I hope the adhesive on the PVC can hold that pressure. Any recommendations or ideas would be great.
Great repair video Thx , it’s happened to also. West marine sells a liquid sealant for all inflatables which I used as an added insurance
After my repair. Thank God no leaks . Check it out , it’s expensive
Nice... I’ll check it out!
Excellent, found the glue but not the tape roll. Have an amazon gear link perhaps?
I really really really keep my fingers crossed I don't ever ever ever need to do that!!!
does this work for tears under the raft, where it is in constant water contact ?
Great tips Nick...you're my hero! PEACE OUT! Ü
And now an expert on inflatable repairs. Thank God the drop kick wasn't in there.
Can you use the same method when patching a hole the size of a half dollar maybe a little smaller I’m having a hard time trying to patch mine I think the next approach is an inside patch but mine is a hole not a tear
I'm dealing with a ripped inflatable bed. The inside patch thing is so smart, why didn't I think of that.
I would be very worried about leaks around the tube seam that the patch went over. I kept waiting for you to comment about that seam. Doesn't the seam create a small pocket for that air can escape from? It seems it would be hard to form the patch completely around the seam.
I though of that when I was doing the repair, but there was just enough space between the tear and the seem to make a seal. Surprisingly, the patch laid quite nice over the seam... 6 months later, that is the tube that holds air the best.
can i use the same glue for my pvc boat?
Nice job. I used Tear Aid to seal the inside of the tube. Then applied a bead of 3M marine sealant to the tear. It was a "T" shape rip and I needed to keep it from separating. I'm putting on another piece of Tear Aid on the outside and then a PVC patch with adhesive. Good detailed video.
3m4200 or 5200? Both are THE best
You are really a professional person. Can you send me the type of glue and how to use it, I will be thankful
I'm in UK, what a nice place you have to repair a dinghy, does this method work in sub zero temperatures with hale and wind? Ha ha, great repair, hope you had sun cream on?
Very excellent. Can you send me the type of glue and the model or specifications of the glue?
Why glue and not pvc liquid fir the pvc liners?
I was watching the part on getting the air bubbles out, thinking that perhaps a fin roller for fiberglassing would be the ideal tool.
Possibly, but it may require a lot of pressure. The metal 7-in-1 tool worked, but was a little harsh.
Just use an old spoon and work all the areas from center out...
I want to replace all the Hyperlon in my boat. You may know a company that does this. I would be very happy if you could help.
This process is extremely lengthy. Does it really work? 2 pack glue usually dries hard. My “go to” vinyl glue is HH66.
Don’t know anything about HH66, but this repair has lasted almost 3 years with no leaks. Rock solid.
Gental docking procedures from now on. Especially during rough conditions, right Crash.....
That sounds boring.
Tolulene is the preferred solution on hypalon, on pvc mek is required tolulene isnt ideal, m.e.k will soften the surface of pvc allowing the glue to make a chemical bond where as tolulene will not..ta
Great ....I also patched my rubber boat in a simple way
Hmmm, didn't King Arthur already showed that video? He even told you guys what to do in the previous vid..... best from HKG
We recently got a ‘big ass tear’ in our dinghy and felt really discouraged on doing it ourselves until we saw this video. Thanks so much for sharing!
Can you share how this has held up for you?
I search and can not find
But did you try slapping on some flex tape with the might of Zeus?
(Also fun fact this was uploaded on my 25th birthday =P)
Do not use flex tape on inflatable boats! We tried it on our pvc inflatable kayak. It rippled and the glue oozed out to a sticky mess nightmare. Took a ton of "glue be gone" once we easily pulled off the tape, and weeks of rubbing. Then we patched it the correct way with marine products.
the translation to Arabic it's great idea but there's some words 🤣
Great video. (but your solvent name is pronounced Tol-you-een)
I know... you’re not the first one tell me. Thanks for watching!
"Tahl-u-een"
Anyone ever tell you you look like Kenny Chesney
Well... more like Chenny Kesney
What about the King!
I tried to put him inside the tube... but Kelly said no.
0
The King seemed quite bored with your narration in the cabin Nick. Perhaps he is still plotting revenge.
Seriously! 😨
Yeah, I was 'gonna say, Poor Arthur, so neglected.....lolol
very poorly shown. You explained it somewhat but displaying exactly how you did the inside work was not good at all.