Mazda Protege Fuel Injector Replacement Guide

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ส.ค. 2024
  • Make/Model: Mazda Protege
    Year: 2000 (Generation 8, 1998-2003)
    Engine: 1.8L Inline 4 FP-DE
    Fuel injectors provide the proper amounts of gas to the engine during the combustion process. Faulty injectors could cause stuttering or shaking of the engine, poor driving performance or fuel economy, and even cause a misfire CEL. In this video we replace them with new ones. Chapter timestamps at the bottom.
    Parts Used:
    - 2x AUS MP10493 Blue Fuel Injectors (amzn.to/3QJ8kDw)
    - 2x AUS MP10494 Brown Fuel Injectors (amzn.to/3QHqUfj)
    - Poor mans lubricant (clean engine oil - amzn.to/3G1ZXOH)
    Tools Used:
    - Ratchet Wrench with 10-22mm sockets (amzn.to/2lAzdyS)
    - Plastic Pry Tool Set (amzn.to/2k5OUxA)
    - 12" Phillips Screwdriver (amzn.to/3stbeoa)
    - Sprite Can (amzn.to/3QF8EDA)
    - Gloves (optional)
    Thanks for watching!
    Disclaimer:
    This video is for educational and informational purposes only. Khan XO assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use of this information is at your own risk.
    As an Amazon Associate I earn from qualifying purchases. All Amazon links are affiliate links from which I earn a small commission at no additional cost to you. Thank you for your support!
    0:19 Intro
    1:08 Parts Used
    2:28 Assessment
    3:33 Start Disassembly
    10:45 Removing old injectors
    15:35 Installing new injectors
    16:08 Reassembly
    21:30 Sanity Check
    22:30 Start Up and Road Test
    23:34 Thank You

ความคิดเห็น • 8

  • @PrincessAzula427
    @PrincessAzula427 9 หลายเดือนก่อน +1

    Wow this is so helpful

  • @russrm5414
    @russrm5414 8 หลายเดือนก่อน +1

    thanks for the guide

    • @khan_xo
      @khan_xo  8 หลายเดือนก่อน

      cheers

  • @KenMFT
    @KenMFT 8 หลายเดือนก่อน +2

    Think this has to be done to my protege, thank you for the video! Imma gonna mess up my car. Lmao

    • @khan_xo
      @khan_xo  8 หลายเดือนก่อน +2

      Good luck, take your time and should be good... I was figuring it out as I went haha

  • @lucasa5363
    @lucasa5363 8 หลายเดือนก่อน

    nice man good video

  • @nle_b345t5
    @nle_b345t5 8 หลายเดือนก่อน +1

    Is it better to replace all 4 or the one that misfired on

    • @khan_xo
      @khan_xo  8 หลายเดือนก่อน +2

      In a pinch you could just fix the one with the misfire but if you are doing all the work to get in there, may just be worth changing them all.