I can suggest u better channel,try engineer wallah and gate wallah ee ece in ,when u study from such channels u have to be patience ND try to watch the whole Playlist(I spend my 4years to understand this)
Alright! My favorite and the best teacher in computing . What a dream! If I only had the money, I would donate Big amounts of it to this guy. But I'm only 19 and not even independent yet from my parents. :(
THANKS A LOT Sir . tommorrow is my exam and I'm listening your lecture just few hours before .i discovered your channel today and saw playlist .It's awsome .Will study all my Engneering and CS basis from here too .Love from Pakistan
Thankyou a lot sir. These are short videos so that for specific part so each part is easy to understand. We don't get any confusion also. Once again thank you so much.
Sir please show the step While solving the kvl equation there are many students who wants to learn...please while doing basics please show everything in detail...make one video for it...then afterwards Carry out directly no problem...
sir , you tell the complex concept in very easy manner and we understand very easily ,but sir try to solve one or two questions more of the topic in a viedo. thank u so much sir
Because we're applying KVL, we know that the algaebric sum of voltages will be zero, basically, source voltage is the total voltage, and the subsequent voltage drops are a part of it, which is why when you subtract portions of the whole voltage from the whole voltage, you get zero
At 04:00 - 04:57, aren't both the networks exactly same since the way of representation in the first network does not show the two paths crossing each other; they are still apart? This way both the network are planar only. #Correct_me_if_I_am_wrong.
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
Example of mesh analysis:- I have 2 doubts sir 1) at 5ohm resistance why we r consedering 2 different polarites in each mesh? Single polarity is not enough ha for both meshes at 5ohm resistor? 2) is the term power loss or power mean same ha sir?? reply or Clarify the doubt sir pls
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
why did you multiply 2 at the last in equation 2? and do we do that in all the cases or was that question specific? and great video tho have been watching it since a long time now
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
from the second mesh you get your kvl equations= -10i2 -5i2+5i1=0 you just divide the whole equation by 5 you get -2i2-i2+i1=0 and that gives you I1-3i2=0
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
Just started my college journey....already I can feel why this channel is recommended by everyone
which clg
I can suggest u better channel,try engineer wallah and gate wallah ee ece in ,when u study from such channels u have to be patience ND try to watch the whole Playlist(I spend my 4years to understand this)
@@SushilKumar-cl5edThen why are you here.. Haha.. For Quick revision??
Thanks to NESO Academy for making engineering study easier !
Love from Bangladesh !
Play at 1.25x
1.75 😂
2x :-)..notes bhi ban jaate hai sath m btaao 🌝
2x
0.25 mei toh aur bhi majaa aayega. Pet dard karwa diya hasate hasate. Itna funny lagta hai slow motion mei dekhte sunte 😆😅🤣
2*
Alright! My favorite and the best teacher in computing . What a dream! If I only had the money, I would donate Big amounts of it to this guy. But I'm only 19 and not even independent yet from my parents. :(
Watching the videos in 2X speed just one night before exam
Yah right
lmaoo
i am just about to start that now lmaoooooooo
same here
even thats slow for me
this is the voice of hope. This voice gives me hope while studying, it's soothing and clear
Thanks NESO.
Luv from Pakistan🇵🇰
Literally better than offline class
THANKS A LOT Sir . tommorrow is my exam and I'm listening your lecture just few hours before .i discovered your channel today and saw playlist .It's awsome .Will study all my Engneering and CS basis from here too .Love from Pakistan
Pakistan me bhi engineering hota hai kya
@@vasusahu7061 tumhe nahi pata ki hota hai ya nahi kounse patthar ke neeche the abbtak
@@vasusahu7061 pakistan me engineering to create atankwadi ?
Thanks
From Egypt
I am able to solve every circuit after watching your videos thank you so much
no words to mention to your explanation !!!!
Thanks NESo from Nepal🇳🇵
Sir, thank you so much for your videos, you are a great teacher!
I saw more videos but I don't understand. I saw your explanation. It made a lot of sense. Thank you very much
Common comment on every video
Thankyou a lot sir. These are short videos so that for specific part so each part is easy to understand. We don't get any confusion also. Once again thank you so much.
Thank you sir for this great explanation
Sir please show the step While solving the kvl equation there are many students who wants to learn...please while doing basics please show everything in detail...make one video for it...then afterwards Carry out directly no problem...
sir ne kvl aur kcl alag padhaya hai agar specifically usi ko samjhna hai to usko search kro
Well done!
Explained form the very basics. Thanks a lot!
🤗🤗🤗
This is one of the best lectures on mesh, thank you sir. Highly appreciated
thanks a lot sir .. this video is extremely helpful and for sure is saving many students time and life
sir , you tell the complex concept in very easy manner and we understand very easily ,but sir try to solve one or two questions more of the topic in a viedo.
thank u so much sir
I have solve questions in the next lectures.
Great explain sir ❤️
great channel.
Will you upload the videos of transient and steady state analysis ?
are thanks bro aapki ek video dekh ke saare ravish singh ke questions horhe , naamka kvl tha ye to bus
Simply superb the classes are
Clear and concise explanation. Thank you !
very clear neso academy
Thanks a lot
excellent teaching
thanks for neso academy
thankfull with gratitude for u NESO ACADEMY
At 9.30 why did we take negative 5(I1) ohms when according to polarity its positive?
Yassssss
Because we're applying KVL, we know that the algaebric sum of voltages will be zero, basically, source voltage is the total voltage, and the subsequent voltage drops are a part of it, which is why when you subtract portions of the whole voltage from the whole voltage, you get zero
Thank you sir.
u r a Lifesaver
I had understood a new topic tq sir
Thank you so much sir, for this videos
thank you for saving my life sarrr big fat fan yours sarr abaya 🙊🙊⚰⚰🙊🙊⚰⚰🙊🙊🙊🙊⚰⚰🙊🙊🙊🙊🙊🙊🙊🙊
Very nice explanation thnk u
At 04:00 - 04:57, aren't both the networks exactly same since the way of representation in the first network does not show the two paths crossing each other; they are still apart? This way both the network are planar only.
#Correct_me_if_I_am_wrong.
Nice
Thank-you sir🙃🙃
Owsm explaination
Excellent explanation!
Such an amazing explanation..!
thank you
Can u do a vedio on mesh analysis on ac and dc
Best video
If we are requried to calculate power absorbed through 5ohm resistance which current we have take.? Plz xplain sir.
Take I1-I2 or I2-I1. It’s gonna give the same result since while finding out the power you have to square it.
Loving your lectures ❤️
I really love your videos. I want to ask, at iv) how you did that equation, i didnt got it. :)
i did
I got I 2 has 2/7 sir 😳 but concept was clear
Instead of 2/5 I got 2/7
Plzzz do videos of node analysis .... These are good
-R6(I3) - R4 (I3-I2) -R2(I3-I1)=0
Broo we need 4x speed for this
Your profile is cute
@@VAiSHI0 thanks!
Thank You :)
Why are 5 ohm resistances not considered while calculating power loss?
Because it is asked for 10ohm resistor, so no need to consider 5ohm resistor
Sir i can't find mesh analysis problem to find V not.
Please tesh how to find V not in meah analysis.
Sir..,pls make videos for AC analysis.
what will be power loss in 5ohm resistor?
Nice sir
Sir! Your videos are helpful for my gate preparation.thank you very much sir🤗🤗.can you respond for my doubt's sir??
Can anyone tell that in step 4th why did he subtract twice of equation 2 from equation 1
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
Thanks
Example of mesh analysis:-
I have 2 doubts sir
1) at 5ohm resistance why we r consedering 2 different polarites in each mesh?
Single polarity is not enough ha for both meshes at 5ohm resistor?
2) is the term power loss or power mean same ha sir??
reply or Clarify the doubt sir pls
Same doubt
Sir explain how to do mesh analysis by matrix method
Sir can we apply mesh analysis in different orientations I.e clockwise and anti clockwise in the consecutive meshes in one network
yeah but do care about the direction
Sir there should be positive 10 in second mesh...pls check
-2 ayega
what if we are asked to find the power loss in the resistor with two currents passing through it
i cant not understand polarity. according to clockwise direction we should write: -10+5I +5(I1 _ I2) .........PLEASE REPLY
sir we are waiting for Power System please there is not any fine playlist on YT
Thank u
Hello! Why we write "equation 1" minus two times "equation 2"?
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
Please complete the playlist of POWER SYSTEM ANALYSIS
Why we assume all the mesh currents in only one direction for a particular problem
I think no confusion on polarities of the elements in between two meshes . Otherwise we can also solve the problem .
How to know resistance polarities?
why did you multiply 2 at the last in equation 2? and do we do that in all the cases or was that question specific? and great video tho have been watching it since a long time now
to solve for i1
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
Love u 🥰
Sir , why you did not use the step where we have to calculate the number of equations
thankyou
Iam confuse from 9:00
If there are two meshes can we take one clockwise and rest anticlockwise
Plsss exaplain too cleared all theorems
Kash k aap programming language k viedo b upload krte....like.. c++, DS , java...😟
Neso Academy c++ and java ???
While solving KVL equaltion what is the logic about I1-2I2...?
Why have you puted 2 with I2 while solvong KVL
He multiplied both side of the equation by 2 so that it is easier for him to subtract.
You went anti-clockwise for I1
How you bring i2 = 2/5
Play at 1.5x and save your time
Sir plz upload the vdo of network synthesis(fooster and caver )
In the substarction of 1 -2 why you multiplied the second equation by 2 why not 10 or 3 or 4 or etc 🙃 please answer this I have only this doubt
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
@@abhiyadavcse8080 2 years ago i posted that comment bro now i don't know that subject name also 😅😅 meanwhile thanks for your explanation
-5i why
I2 should be equal to -2/7 not 2/5
please correct me if m wrong
I2 is 2/5. Eqn 1 - eqn 2. So, eqn 2 becomes: -2i1+6i2=0.
2/7 ayega..video me positive 10 ko shift kiya to vo negative hoga
yes bro, you are right ..........sir, please give me the explanation
U r right i2 is - 2/7
eq 1 - 2x eq2
then
-I2 +6 I2 =2
I2 = 2/5
plz send me this pdf..
How can you solve 12/11 ? Make an a step by step?
🙏❣
Bacha liya bhai Kal electrical ka paper hai😅
can any tell me how I1-3i2=0 by solving equation 2
from the second mesh you get your kvl equations= -10i2 -5i2+5i1=0 you just divide the whole equation by 5 you get -2i2-i2+i1=0 and that gives you I1-3i2=0
@@hope-wq9jd how is 10 i2 negative
Why did you say :
Equation 1 - (2*equation 2) ?!
Elimination method bro
bro actually he was using the elemination method see the first eqn is 2i1-i2=2 second eqn is i1-3i2=0, so he multiplied 2 with second eqn to make 2i1-6i2=0, and now eqn 2 can be eleminated by eqn 1 and we can have the value of current i2
sir why power loss =I^2 *R ?
It is formula...of power loss
Play at 1.5x