Hey I have a 97 ford f350 that is completely stock except for a k&n cold airintake and I'm wanting to install the Hydra php tuner now what tunes could I use that would not hurt my truck?
@@VenacticGod sorry for the late response bud. I just saw your comment. You could honestly run whatever tune you want. The tune would perform better with more upgrades, but it’s not necessarily bad to use a high HP tune with a stock truck, or requires that you do the upgrades first. I mean, it’s not good for the truck in general, but it’s not “worse” because your truck is stock.
@@NoHalfAss yo Cody how did u get ur t hanger u bolt tight enough around the 2 pipes? I can't get it tight enough to pinch the two pipes together so the pipe that goes over the rear axle is still loose.
@@73powerstroke56 honestly bro it wasn’t a problem for me. The clamp slipped right over and tightened down just fine, more than enough to be as tight as it needs to be. Maybe they messed up on something with the kit the sent you. Maybe contact the seller about it?
I like how it sounds , I like more... How sincere you are when you say you don't know what we're you doing, even if it's a easy job, you are sincere , this make me believe more in your channel , just a normal dude, normal skills with his truck.
Lol, i have the same exhaust and my gf complains about it, glad you like it bro. her window is above the driveway and it wakes her up in the morning when i go to work.
I welded mine. Was afraid someone would unbolt and take it. Was one of my favorite mods for performance and appeal. Felt like my truck could breath easier. Only thing I’ve done so far that was harder on my OBS 7.3 was pulling and re-installing the turbo! Happy you finally got to the exhaust. That was the start of a new beginning in mods for me. Mods become an obsession That’s why I think they label the mods in “Stages 1,2,3”, each stage becomes more expensive,higher performance gains achieved and deepening the obsession for more power and appeal! Thanks for your time. Was funny watching your friend in chair in background while you raised the up-pipe. I knew he’d have to get up and give ya a hand. I think he knew too. Lol
Sounds great, wish I had given you some tips for removing the old exhaust. So for those who haven't done a system yet, spray the band clamp with PB Blaster that will help break the clamp loose. Also if you remove the CAC pipe gives you more room when working on the down pipe. Cody when you upgrade the turbo replace the leaking up pipe's I thought I had seen some soot on the down pipe. Again SOUNDS GREAT!!!!!
Powerstroke Project I’ve seen a few videos of trucks and big rigs where they’ll insert a pvc pipe end with a fitting so they can pump air into the system. Then squirt soapy water on the joints to look for leaks. Then just tighten the hose clamps to seal them up better.
Stock pipes are 3.5 inch. That 4 inch you took off was aftermarket. When I saw the muffler, I new it was aftermarket. Thanks for the video. Good luck with the truck. You must get a whole lot of boost now.
Viking Child Viking Child yeah the muffler and tailpipe were aftermarket but everything before that was stock. I couldn’t tell a difference on boost but definitely hear the turbo a LOT more now! Thanks for watching the video! Hope you enjoyed it🤘🏻🔥
New sub I like the format of your videos makes me feel like im chilling with a friend lol anyways beautiful truck my friend I myself just got a 7.3 a week ago and was looking for a channel like this
I think 7" tip with 5" exhaust looks the meanest, I like to cut my back to where the tip is barely visible from back of the truck. All preference tho. Sounds good.
Good vid buddy and love the 7.3! i'm on my second one. i noticed a little lag when i installed my 5" exhaust also, and figured with the exhaust breathing more it felt like it was choking trying to pull more air into the turbo. I pulled out the stock corrugated intake hose and air box and installed an AEM Brute force intake. Holy shit the difference!!! the turbo spooled up quicker, and sounded louder. Never heard the waste gate dump either before that, it's awesome. Plugged in a Diablosport Predator and unless you want to go crazy with engine mods, you wont need anymore!!
Take some stuff outta your way first, like the cold side intercooler pipe. Enjoy your 7.3, it's an experience I believe closest to the 60s muscle car days!
alwaysup2late it sounds great bro! I’m obsessed with listening to it while I drive! I don’t even listen to my radio anymore I just drive with the windows down and listen to the turbo and exhaust 😂😂😂😂
There goes the fuel mileage hahaha. Those 4" downpipes are terrible. I was so happy when I saw that this truck already had one when I bought it. The truck sounds great man!
Dude I just found your channel and it is freaking awesome you showed just enough I need to get and understand the whole thing thank you man please keep up the good work!!!
Nice job , I’m going to upgrade mine, but I’m going to put Lincoln Chrome stacks between the cab corner and the flat bed I’m working on right now. Got to get the bed sandblasted and painted before I mount it and I think I’ll leave a small gap between the bed and can so the stacks can run in a bit.
Great job Cody sounds absolutely amazing most importantly you are happy with it that's what really matters keep up the good work my friend looking forward to more upgrades I'm looking into upgrading my Turbo as well with the bigger turbo housing 4in Inlet and the Wicked Wheel I'm doing research I don't really want to go with cheap parts from China cuz that turbo wheel spins at high RPMs that's the one thing I want to make sure I don't cheap out on basically the kit with wastegate control looking around $450 I'm still debating I think I'm just going to go for it after watching you're inspiring video talk soon
Robert Fisk thank you Robert! I want to upgrade my turbo with the banks big head waste gate actuator, riffraff billet wheel, and the boost fooler $60 on eBay. All together about $420.
Powerstroke Project if your in California you may not be able to have the boost cooler sent here, SMOG, I had mine shipped to my son in AZ and he mailed it to me.
Hey man you need to go get a kc300x turbo & delete that ebp valve. Those factory Garrett turbos on the 7.3s don't produce very good boost & also when those ebp valves get older they start sticking, & the wastegate will start to stick open sometimes also, & then all you have is turbo sound & 0 boost. Then go get a hydra chip, & also pick up a fass lift pump & then go get some upgraded injectors from full force diesel. THEN you will really love that 7.3! Got the same exhaust but with a 8in chrome tip. Also pick up a Edge insight cts2 monitor with the EGT probe. Also if you do do this stuff you are gonna need to have a transmission built for it cause the factory transmission won't last very long with real power.
Death BeforeDishonor thanks for the advice man! Check out some of my newer videos! I got the edge cs2 monitor and just put the hydra on also. A race transmission is definitely something I want to do eventually. And I’ll look into that turbo cuz now my stock turbo is getting turbo surge since I’m getting 25psi now with the hydra.
What up man, sounds killer! I didn't catch what brand you went with? Thanks for the video I'm doing mine soon but going to have to run a muffle because of my lame ass neighbors. Strong work!
I would like to show you my 99’ 7.3 I have been working on.. I still need a lot more work but it’s coming along pretty good.. and I definitely need that 5 inch straight pipe.. nice truck bro!
Glad you did a little of install process cuz there’s a lot of guys & gals who want to know how it’s done. Like me even tho I have a 6.0 there’s a lot of stuff that’s the same. Sounds awesome! Real mean, aggressive sound! Check out the TH-cam channel “Living On Wheels” Joe has a 7.3, does a lot of work on his truck & he’s in a wheelchair but that doesn’t stop him at all! Thanks for all you do making your videos and I look forward to seeing your videos soon!
Joseph Cirelli yeah man I hope it helps! And yeah me and Joe are subscribed to each other and talk every once in awhile🤘🏻 cool guy with and awesome truck/channel🔥💯
Excited to put my 4” on my OBS 7.3l. I got the 3” downpipe and a TS6 to pop in hehe. Should sound great and might be at the same HP as the stock Super Duty’s with this chip. Time to wake the old farm truck ;)
Yep...definitely louder if that was what you were shooting for. Surprised you didn't put sealant on at the joints, to stop the exhaust fume leaks from getting inside your cab.
Twisted Thrttle hahaha it’s WAY louder. My neighbors never even mentioned the noise of my truck until I put the 5 inch straight pipe on. It was only one person and he wasn’t an A-hole about it, he just let me know it’s super loud, but yes it’s way louder.
Jake Shull not at all. I just went on a trip 2 weeks ago. No problem. But I also have a stereo system and listen to my music loud so that might help. I used to have a gas dodge truck and the exhaust ended after the muffler underneath the cab and that truck would give me a headache.
Mystful I’m not completely sure if there’s a HUGE difference since I never had the full 4” straight pipe. But based on other videos I’ve seen comparing them there’s definitely a noticeable difference. HUGE difference between the stock exhaust I had and the 5 inch though!
Honestly bro I couldn’t even tell you anymore. I got it off Amazon and they don’t sell these kits anymore and I don’t remember the brand. It’s super hard to find a straight pipe kit for a 7.3 nowadays.
jayonez 13 yes. Probably doesn’t do anything but it was cheap so why not 🤷🏻♂️😂 there’s ways to test the voltage on the batteries to see if it’s actually doing anything but I haven’t checked it.
i've heard there's no use for a 5 inch pipe except for more sound (which i prefer, loud as possible is best) unless you're pushing 800+ hp. don't quote me on this though lol
oce haha yeah that’s pretty much true. I just did it for the sound. Lol Although 800 is pretty high. I would say 500-600+ would work well with a 5” straight pipe.
I’ve been having people ask me about the straight pipe a lot lately. Unfortunately I can no longer find a straight pipe kit for the 7.3 on amazon! I don’t know if they got banned or can’t be shipped to California anymore or what... but haven’t been able to find any straight pipe kits.
@@NoHalfAss I have found the Diamond Eye and MBRP kits that are straight pipe. I haven’t called to see if they are in stock. I’m guessing the links have something to do with the emissions stuff. Wasn’t sure if either of those are what you used or not?
Hey, just curious.. I have a 4” exhaust on my 7.3 and I’m debating on cutting the muffler out and throwing a straight pipe in its place and keeping it full length still. Just curious how much louder you think it will be? I don’t want to get hassled cause it’s “too loud” but I’m fine with a little louder.
I had the stock exhaust which I believe was 3” or 3 1/2” inch with a resignator when I bought the truck, so when I went from that to the 5” straight pipe it was a HUGE difference and way louder. But if you already have a 4” exhaust and just plan on taking the muffler out and having a 4” straight pipe I don’t think it will be a crazy difference, but you’ll notice it for sure. I think you’ll like it!
I have 4" straight pipe and its fuckin obnoxious. I dont eat fast food anymore bc im not shutting off my truck in a drive-thru when covid was first starting. And my neighbors fuckin hated me. 🤣 you can't sneak around at night for a peice of poon.
Dude! I just found a 99 f350 7.3 crew cab LB with under 34,000 miles on it, (33,250). I want to do a ton of work to it and would appreciate any suggestions as to what I should try and where to shop. I am looking at the banks power kit at the moment but have not pulled the trigger on anything as of yet. Its all stock at the moment.
Sea Jay I don’t know anything about the banks power kit to be honest bro. But riffraff diesel has TONS of upgrades for the 7.3 powerstrokes! And I can’t recommend the hydra chip enough. Best tuner/chip I’ve had on the 7.3 and I had the edge and superchips before. Also I have a video on the high torque starter and that’s one of the best upgrades I’ve done to my truck🤘🏻
Island FlavaFM yeah sorry bud, it looks like they’re not available on amazon right now. I keep them up because sometimes they become available again but right now I can’t find any straight pipe kits anywhere for the 7.3
I highly recommend the KC S-300 drop in billet/turbine wheel upgrade to the GTP-38 stock turbo. cncfab.us/i-30498942-kc-turbos-94-03-7-3l-s300-turbine-360-bearing-billet-wheel-kit-300317.html. It's a fully balanced assembly and can be easily installed right at home. I also threw on the banks big head waste gate actuator. Definitely brought the balls back in my old 7.3. (285,000 Miles) Did an EBPV delete as well. Just ordered the oil cross over and a few other goodies. Seems what I have thrown at the truck so far has paid off. Straight piping a 7.3 is really the only way to go.
5” straight pipe- amzn.to/2XoLszG
5” x 7” AFE exhaust tip- amzn.to/2JaVgnS
CockYaLegS amzn.to/2ZqpYmO
Hey I have a 97 ford f350 that is completely stock except for a k&n cold airintake and I'm wanting to install the Hydra php tuner now what tunes could I use that would not hurt my truck?
@@VenacticGod sorry for the late response bud. I just saw your comment. You could honestly run whatever tune you want. The tune would perform better with more upgrades, but it’s not necessarily bad to use a high HP tune with a stock truck, or requires that you do the upgrades first. I mean, it’s not good for the truck in general, but it’s not “worse” because your truck is stock.
@@NoHalfAss yo Cody how did u get ur t hanger u bolt tight enough around the 2 pipes? I can't get it tight enough to pinch the two pipes together so the pipe that goes over the rear axle is still loose.
@@73powerstroke56 honestly bro it wasn’t a problem for me. The clamp slipped right over and tightened down just fine, more than enough to be as tight as it needs to be. Maybe they messed up on something with the kit the sent you. Maybe contact the seller about it?
I like how it sounds , I like more... How sincere you are when you say you don't know what we're you doing, even if it's a easy job, you are sincere , this make me believe more in your channel , just a normal dude, normal skills with his truck.
YENKOGT thank you! I appreciate that, and yes, I try to always be honest. No BS!🤘🏻thank you for supporting the channel!🙌🏻🙏🏻💯
Gah dude you look exactly like my brother that passed away 13 years ago. Similar interests too apparently. So weird how that works, great vid tho
Lol, i have the same exhaust and my gf complains about it, glad you like it bro. her window is above the driveway and it wakes her up in the morning when i go to work.
John Lee hahaha luckily for my my girl is into it. She likes the big lifted loud truck thing 😂😂😂
Associate the sound to morning sex, she will love it
Lol why is your gf living with you?
@@lazydadsgarage lol!
Buy a new house ! Prb solved !
I enjoy your humbleness, personally I’m not a mechanic but this type of attitude gives me inspiration to get after it myself! Keep it real 👍
My 7.3 is in the shop right now so I just watch videos of other people’s to cheer me up.
Hope it’s done soon bro🤘🏻
Same
I welded mine. Was afraid someone would unbolt and take it. Was one of my favorite mods for performance and appeal. Felt like my truck could breath easier.
Only thing I’ve done so far that was harder on my OBS 7.3 was pulling and re-installing the turbo! Happy you finally got to the exhaust. That was the start of a new beginning in mods for me.
Mods become an obsession
That’s why I think they label the mods in “Stages 1,2,3”, each stage becomes more expensive,higher performance gains achieved and deepening the obsession for more power and appeal!
Thanks for your time.
Was funny watching your friend in chair in background while you raised the up-pipe. I knew he’d have to get up and give ya a hand. I think he knew too. Lol
Jeremy Keith Hahahaha yup all true! Every time I do an upgrade I add 2-3 more upgrades to the “to-do” list 😂😂😂
Thank you for making this channel. I've been looking for one that features a 7.🌲
COW8OYFROMHELL glad you enjoy it man and thank you for the support!🤘🏻🙌🏻💯
first before-after exhaust sound video ive ever seen where there is a full tank. kudos
Headles Norseman hahaha nice. Thanks for watching🤘🏻💯
it’s super helpful that you are explaining exactly what tools you are using! keep up the work!!
+Tyler Garrehy glad I could help and glad you enjoyed it man!
Sounds great, wish I had given you some tips for removing the old exhaust. So for those who haven't done a system yet, spray the band clamp with PB Blaster that will help break the clamp loose. Also if you remove the CAC pipe gives you more room when working on the down pipe. Cody when you upgrade the turbo replace the leaking up pipe's I thought I had seen some soot on the down pipe. Again SOUNDS GREAT!!!!!
Myles Hansel okay man I’ll look into those🤘🏻 wouldn’t it just be new to turbo boots to fix the leaks?
Powerstroke Project sometimes just tightening the clamps will seal the boots better and stop/reduce leaks.
Buckinchuteranch 1 nice good to know! Thanks!
Powerstroke Project I’ve seen a few videos of trucks and big rigs where they’ll insert a pvc pipe end with a fitting so they can pump air into the system. Then squirt soapy water on the joints to look for leaks. Then just tighten the hose clamps to seal them up better.
Buckinchuteranch 1 interesting! I’ll have to check that out! Thanks man!
I am swapping 2 7.3 engines I got one pulled out and I am putting a another 7.3 engine in a 2001 Ford F-250 and I am only 15
Braxton Bigcrow damn that’s awesome bro!!!!
I'm almost 30 and this 7.3 excursion is my first diesel. Is the engine hard to pull? (I have a leaking oil pan)
too bad you cant reach the gas pedal to drive it
Stock pipes are 3.5 inch. That 4 inch you took off was aftermarket.
When I saw the muffler, I new it was aftermarket.
Thanks for the video.
Good luck with the truck. You must get a whole lot of boost now.
Viking Child Viking Child yeah the muffler and tailpipe were aftermarket but everything before that was stock. I couldn’t tell a difference on boost but definitely hear the turbo a LOT more now! Thanks for watching the video! Hope you enjoyed it🤘🏻🔥
New sub I like the format of your videos makes me feel like im chilling with a friend lol anyways beautiful truck my friend I myself just got a 7.3 a week ago and was looking for a channel like this
Thank you bro I appreciate it! And congrats on your new 7.3!!!🤘🏻
@@NoHalfAss Thank you bro!
Even though this was made 3 months ago I love you
Dat_ Ford_Guy hahaha glad you enjoyed the video!
Love to do that to a manual version of that truck. :)
Badassss!! Love the sound of a straight piped powerstroke.
I think 7" tip with 5" exhaust looks the meanest, I like to cut my back to where the tip is barely visible from back of the truck. All preference tho. Sounds good.
Nate yeah I think I’m gonna do that exactly! AFE has a black one with those dimensions I believe🤘🏻
Good vid buddy and love the 7.3! i'm on my second one. i noticed a little lag when i installed my 5" exhaust also, and figured with the exhaust breathing more it felt like it was choking trying to pull more air into the turbo. I pulled out the stock corrugated intake hose and air box and installed an AEM Brute force intake. Holy shit the difference!!! the turbo spooled up quicker, and sounded louder. Never heard the waste gate dump either before that, it's awesome. Plugged in a Diablosport Predator and unless you want to go crazy with engine mods, you wont need anymore!!
Dang that’s crazy! I’ll look into that intake for sure! Thanks for the information bro!🤘🏻
Better video quality & new upgrade 👍🏾Loving it
Big Pimp sweet thanks man! Glad you enjoyed it!🤘🏻💯
Take some stuff outta your way first, like the cold side intercooler pipe. Enjoy your 7.3, it's an experience I believe closest to the 60s muscle car days!
Matt Fischer nice thank you for the info! Glad you enjoyed the video!🤘🏻🔥
Wooooo lawd brother the beast sounds amazing I wish I could see it in person I can only imagine how it sounds up close 🤘🏽💪🏽
Keendawg 1031 it’s amazing bro! The videos don’t really show the true sound!!!
Great before and after edit shots
🙌🏻🙌🏻🙌🏻
Man that sounds good! Would love to get a 5" on mine at some point. Truck looks awesome too 👍
alwaysup2late it sounds great bro! I’m obsessed with listening to it while I drive! I don’t even listen to my radio anymore I just drive with the windows down and listen to the turbo and exhaust 😂😂😂😂
@@NoHalfAss My favorite way to drive! haha
I know this is a couple years old but great video my man, about to buy my first 7.3 as a project truck and this was some really good information
There goes the fuel mileage hahaha. Those 4" downpipes are terrible. I was so happy when I saw that this truck already had one when I bought it. The truck sounds great man!
Living On Wheels hahaha yup! I can’t stay off that skinny pedal!😂 love how it sounds! Thanks man🤘🏻
you know I really like the old exhaust better. It still sounds great brother !
Oledodgeboy98 some people do! It’s all preference. Thanks bro!🙌🏻💯
@@NoHalfAss No problem keep up the good work . love the videos bub
Anyone notice in the before exhaust take of he had no american flag just the pole and after the exhaust had the american flag.
Another great 7.3 DIY video! Thanks for posting!
Thanks man glad you enjoyed!
I love that 5 inch sound
Floyd Gould me too bro!!
Cab lights would look cool on your truck 🤩
xDieselv I’ve been told that before 🤔 maybe I’ll add it to the list 🤘🏻🔥💯
Powerstroke Project I think you should 🤙🏼
6.0's and 7.3's just sound different period, but the 7.3 does sound insane with the straight pipe
Honestly the 6.0 sounds amazing but way to raspy. The 7.3 has this sort of hollow depth that’s sounds amazing. Hard to explain but I love both.
Turned out beautifully!!!
That Powerstroke Bloke thanks bud! I’m super happy with it! Wish I did it a long time ago! Hahahaha
Dude I just found your channel and it is freaking awesome you showed just enough I need to get and understand the whole thing thank you man please keep up the good work!!!
Awesome bro glad I could help and I’m glad you enjoy the videos!
Nice truck dude! It sounds amazing and nice rolling coal bro!
Truck sounds sick
Thanks bro!
Much louder! Sweet truck
98 12 valve thank you man!🙌🏻🙏🏻💯
Nice job , I’m going to upgrade mine, but I’m going to put Lincoln Chrome stacks between the cab corner and the flat bed I’m working on right now. Got to get the bed sandblasted and painted before I mount it and I think I’ll leave a small gap between the bed and can so the stacks can run in a bit.
Buckinchuteranch 1 nice bro that’s awesome! I think I’ll eventually do stacks too🤘🏻 love how they sound🔥
The intercooler tube comes off pretty easy. And the oil fill spout just unscrews. Would have given you more space up top
Great job Cody sounds absolutely amazing most importantly you are happy with it that's what really matters keep up the good work my friend looking forward to more upgrades I'm looking into upgrading my Turbo as well with the bigger turbo housing 4in Inlet and the Wicked Wheel I'm doing research I don't really want to go with cheap parts from China cuz that turbo wheel spins at high RPMs that's the one thing I want to make sure I don't cheap out on basically the kit with wastegate control looking around $450 I'm still debating I think I'm just going to go for it after watching you're inspiring video talk soon
Robert Fisk thank you Robert! I want to upgrade my turbo with the banks big head waste gate actuator, riffraff billet wheel, and the boost fooler $60 on eBay. All together about $420.
Powerstroke Project if your in California you may not be able to have the boost cooler sent here, SMOG, I had mine shipped to my son in AZ and he mailed it to me.
Hey man you need to go get a kc300x turbo & delete that ebp valve. Those factory Garrett turbos on the 7.3s don't produce very good boost & also when those ebp valves get older they start sticking, & the wastegate will start to stick open sometimes also, & then all you have is turbo sound & 0 boost. Then go get a hydra chip, & also pick up a fass lift pump & then go get some upgraded injectors from full force diesel. THEN you will really love that 7.3! Got the same exhaust but with a 8in chrome tip. Also pick up a Edge insight cts2 monitor with the EGT probe. Also if you do do this stuff you are gonna need to have a transmission built for it cause the factory transmission won't last very long with real power.
Death BeforeDishonor thanks for the advice man! Check out some of my newer videos! I got the edge cs2 monitor and just put the hydra on also. A race transmission is definitely something I want to do eventually. And I’ll look into that turbo cuz now my stock turbo is getting turbo surge since I’m getting 25psi now with the hydra.
Beautiful truck man!! Loving the content!
Jason Manahane thank you bro! Appreciate it!🙌🏻 Glad you enjoy them, I love making these vids🤘🏻🔥
I've got 4" straight out , before passenger rear tire , with a 5" tip sounds great
What up man, sounds killer! I didn't catch what brand you went with? Thanks for the video I'm doing mine soon but going to have to run a muffle because of my lame ass neighbors. Strong work!
F A thanks man! It’s by MVP auto parts. $310 on amazon. It’s the first link in the description for this video🤘🏻
Happy for you man
Tennessean 6.0 thanks bro I appreciate that!🤘🏻🙏🏻💯
I would like to show you my 99’ 7.3 I have been working on.. I still need a lot more work but it’s coming along pretty good.. and I definitely need that 5 inch straight pipe.. nice truck bro!
Jorge Mimila send me some pics on Instagram bro!!🤘🏻🤘🏻🤘🏻 @80hdprojects
80HD Projects I don’t have Instagram bro lol
Jorge Mimila make one 😂
Glad you did a little of install process cuz there’s a lot of guys & gals who want to know how it’s done.
Like me even tho I have a 6.0 there’s a lot of stuff that’s the same.
Sounds awesome! Real mean, aggressive sound!
Check out the TH-cam channel “Living On Wheels” Joe has a 7.3, does a lot of work on his truck & he’s in a wheelchair but that doesn’t stop him at all!
Thanks for all you do making your videos and I look forward to seeing your videos soon!
Joseph Cirelli yeah man I hope it helps! And yeah me and Joe are subscribed to each other and talk every once in awhile🤘🏻 cool guy with and awesome truck/channel🔥💯
Sounds just like mines!!..awesome!!..🤙🏽
lbj808 I love it bro!
WD40 and a flat blade scew driver is your best friend for getting exhaust hangers off
fujitsubo good to know for the future, thanks!🤘🏻🔥💯
just watched this video- love it- I have a 99 F-450 with a 7.3 ----your Amazon links no longer work. FYI
7/16 with a swivel socket on your impact works pretty good that's typically what I use you already got it done but if you do it again in the future
Donovan McLaughlin good info man thanks! I just got a swivel socket too🤘🏻
Daaaaam i cant believe it has been 4 year since this video... Hope your doing well cody
I can’t either bud! I wish I had the time to make more videos. The 7.3 doesn’t get much love these days. Hahaha
Much cooler sound! 💪
Lynn Raasakka I think so too!🙌🏻🔥💯
Excited to put my 4” on my OBS 7.3l. I got the 3” downpipe and a TS6 to pop in hehe. Should sound great and might be at the same HP as the stock Super Duty’s with this chip. Time to wake the old farm truck ;)
Apollo niiiiiice bro!!!🤘🏻🔥💯
That’s gonna be fun! Lol
Yep...definitely louder if that was what you were shooting for. Surprised you didn't put sealant on at the joints, to stop the exhaust fume leaks from getting inside your cab.
Interesting bro! I’ve actually never heard of that but it makes sense!
I like the 7.3 powerstroke
schnuurtchke 🙌🏻🔥🤘🏻💯
Who cares if the truck is slower? As long as its louder! Police only pull over fast trucks, not loud trucks!😂😂😂
wes owen exactly!!🤘🏻🔥😂
80HD Projects not in Cali lol
I got a 7.3 chipped and tuned with dual 4inch straight pipes
Donovan Sabo nice bro!!!
awesome bro🔥
King Shaka thanks man!
My 2000 7.3 f350 doesn’t have enough room for a 4 inch let alone a 5 inch. There is about 1/4 inch Clarence between the downpipe and the motor!
Just put a 5in on my 2000 cclb 7.3. It'll fit. Just really tight
Sounds awesome 👍👍
Thanks for the video just picked it up from amazon come over and help me install it haha
Brian Fisher Hahahaha! It’s not too bad bro I have faith in you!!🤘🏻 lol
I couldn't tell much on drive by but sounds bad ass at idle
I leanered wd40 or pb blaster on the rubber hanger pops right off
geart vid man and great list of truck parts
Rustynail17 thank you I appreciate that!🙌🏻🤘🏻🔥
Great video sir how is the interior noise?
It’s a little noisy but I don’t mind it. Gets a little louder on the highway above 70mph
Does it make it that much louder compared to stock straight pipe? My neighbors have started a war with me and I want it loud lol
Twisted Thrttle hahaha it’s WAY louder. My neighbors never even mentioned the noise of my truck until I put the 5 inch straight pipe on. It was only one person and he wasn’t an A-hole about it, he just let me know it’s super loud, but yes it’s way louder.
👏🏼👏🏼👏🏼 sounds bad ass!!!!
Love how your truck looks what size lift?
casey harrell thanks man! I bought the truck with the lift but I believe it’s a 4-6” lift🤘🏻
Good looking truck bro
Ethan_Marquardt thank you man!!!🙏🏻💯
I have a question, Is the straight pipe all 5"? Because I heard it's a 4" down to a 5"?
Yes, it’s a 4” down pipe and then 5” from there. 5” down pipe wouldn’t fit
@@NoHalfAss thanks for helping me clearing things up
On long drives do u get headaches? I’ve had a truck that use to give me head aches from the exhaust
Jake Shull not at all. I just went on a trip 2 weeks ago. No problem. But I also have a stereo system and listen to my music loud so that might help. I used to have a gas dodge truck and the exhaust ended after the muffler underneath the cab and that truck would give me a headache.
I have 2 side by side 8 inch stacks and i open the bck window never get headaches only bliss
BEEFY 7895 that sounds like heaven 🤤
Good job 👍
Good video guy! Thanx!!!
Van's Best Friend glad you enjoyed it and glad I could help! Thanks for watching!
Link isn’t working to look up the exhaust boss man
With the 5" you can really hear the turbo flutter a lot more.
Great video, thanks:)
Glad you enjoyed it!🤘🏻
How did your odometer go from 3004some to10040some
Can you give specs on the wheels you have. Im looking at some 17x8 5 mr305s for my truck. They are 0mm with 4.75"
When u put the new 5 in straight pipe on did your check engine light come on
No it didn’t 🤔
The 4 inch and 5 inch a big difference?
Mystful I’m not completely sure if there’s a HUGE difference since I never had the full 4” straight pipe. But based on other videos I’ve seen comparing them there’s definitely a noticeable difference. HUGE difference between the stock exhaust I had and the 5 inch though!
Not much I have had both. My 02 f250 7.3 had a 5" and my 01 7.3 has a 4". The 5 has a deeper tone too it.
I mite have to go with the 5 inch im scared about drone noise though since i be on the road alot. Check out my 7.3 shorts.
Hey bro what kind (brand) of straight pipe is that ?,,, love the sound 👍
Honestly bro I couldn’t even tell you anymore. I got it off Amazon and they don’t sell these kits anymore and I don’t remember the brand. It’s super hard to find a straight pipe kit for a 7.3 nowadays.
Is that a solar panel for batteries at 0:20 in windshield ??
jayonez 13 yes. Probably doesn’t do anything but it was cheap so why not 🤷🏻♂️😂 there’s ways to test the voltage on the batteries to see if it’s actually doing anything but I haven’t checked it.
i've heard there's no use for a 5 inch pipe except for more sound (which i prefer, loud as possible is best) unless you're pushing 800+ hp. don't quote me on this though lol
oce haha yeah that’s pretty much true. I just did it for the sound. Lol
Although 800 is pretty high. I would say 500-600+ would work well with a 5” straight pipe.
Powerstroke Project lmao I still want one even though I just have a tuner and intake
oce that’s pretty much all I have too 🤷🏻♂️😂
Correct there is no performance difference, when you make lots of hp or tow super heavy it will help slightly. You get a deeper tone with the 5".
80HD Projects links to parts don’t appear to be working any longer. Anyway you can provide brand on pipe used or a new link? Thanks!
I’ve been having people ask me about the straight pipe a lot lately. Unfortunately I can no longer find a straight pipe kit for the 7.3 on amazon! I don’t know if they got banned or can’t be shipped to California anymore or what... but haven’t been able to find any straight pipe kits.
@@NoHalfAss I have found the Diamond Eye and MBRP kits that are straight pipe. I haven’t called to see if they are in stock. I’m guessing the links have something to do with the emissions stuff. Wasn’t sure if either of those are what you used or not?
Hey, just curious.. I have a 4” exhaust on my 7.3 and I’m debating on cutting the muffler out and throwing a straight pipe in its place and keeping it full length still. Just curious how much louder you think it will be? I don’t want to get hassled cause it’s “too loud” but I’m fine with a little louder.
I had the stock exhaust which I believe was 3” or 3 1/2” inch with a resignator when I bought the truck, so when I went from that to the 5” straight pipe it was a HUGE difference and way louder. But if you already have a 4” exhaust and just plan on taking the muffler out and having a 4” straight pipe I don’t think it will be a crazy difference, but you’ll notice it for sure. I think you’ll like it!
@@NoHalfAss ok cool. Thanks man
I have 4" straight pipe and its fuckin obnoxious. I dont eat fast food anymore bc im not shutting off my truck in a drive-thru when covid was first starting. And my neighbors fuckin hated me. 🤣 you can't sneak around at night for a peice of poon.
Did u upgrade turbo or motor work?
On this 5inch pipe.
Dude! I just found a 99 f350 7.3 crew cab LB with under 34,000 miles on it, (33,250). I want to do a ton of work to it and would appreciate any suggestions as to what I should try and where to shop. I am looking at the banks power kit at the moment but have not pulled the trigger on anything as of yet. Its all stock at the moment.
Sea Jay I don’t know anything about the banks power kit to be honest bro. But riffraff diesel has TONS of upgrades for the 7.3 powerstrokes! And I can’t recommend the hydra chip enough. Best tuner/chip I’ve had on the 7.3 and I had the edge and superchips before. Also I have a video on the high torque starter and that’s one of the best upgrades I’ve done to my truck🤘🏻
I wanna buy the down pipe and 5”str8 pipe but the links are not working
Island FlavaFM yeah sorry bud, it looks like they’re not available on amazon right now. I keep them up because sometimes they become available again but right now I can’t find any straight pipe kits anywhere for the 7.3
Do they make this kit for a regular cab with an 8 foot bed?
I know this is a old video but how did you get those mirrors on there?
I bought the truck with them honestly. But you can by ones that fit directly onto these trucks on Amazon
What size tires were on the truck in this video?
What size of tires and rims are on there? They look great
Thanks! In this video they were 37” tires and 17” rims. I’m on 40” tires and 18” rims now
I’m from Cali to btw, Ventura county.
@@NoHalfAss nice, next upgrade to my e99 will prolly be a hydra. Just got done rebuilding the turbo, ebpv delete, and installed a 5 inch straightpipe
I highly recommend the KC S-300 drop in billet/turbine wheel upgrade to the GTP-38 stock turbo. cncfab.us/i-30498942-kc-turbos-94-03-7-3l-s300-turbine-360-bearing-billet-wheel-kit-300317.html. It's a fully balanced assembly and can be easily installed right at home. I also threw on the banks big head waste gate actuator. Definitely brought the balls back in my old 7.3. (285,000 Miles) Did an EBPV delete as well. Just ordered the oil cross over and a few other goodies. Seems what I have thrown at the truck so far has paid off. Straight piping a 7.3 is really the only way to go.
What size is your downpipe? I'm changing mine to 4 from a 3.. after the downpipe I have 4 inch to two 7 inch stacks. Hoping it makes a difference
My downpipe is also a 4”
Why does your 7.3 come with a tiny muffler? Was the exhaust you had before an aftermarket muffler?
Batman The Dark Knight it was aftermarket for sure. The previous owner must have put it on there but it was probably a louder muffler than stock
Huge difference if you went from 7.3 to 6.7
Cant seem to find this on Amazon anymore any recommendations?
That no spare tire is a dealbreaker, does the 4” allow for the retention of the spare tire?
I would want to keep that torque as I pull a lot.
I have no idea if the spare fits with the 4” bro. For me the spare was pointless anyways cuz I have bigger tires. Especially now that I have 40s