MFC Offroad HID Light Installation | 2014 -2018 Jeep Cherokee KL
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- Here we document in full how simple it is to install our OEM+ HID Error Free upgrade. Plug and play, shown installed on a 2014 Jeep Cherokee Trailhawk with the front end opened up for the MFC Prerunner Tubular Bumper.
Please note, for demonstration purposes, the ground is fastened to the body during this installation only. We highly recommend listening to the instructions found in the video starting at 4:00 and install the ground as shown in the written instructions found on the site. Here is a quick link for you to follow:
cdn.shopify.co...
Installation is quick and effortless.
Check out the product which can only be found here:
mfcoffroad.com...
![[LIVE] : ONE ลุมพินี 79 | คู่เอก "ก้องชัย vs อาเมียร์"](http://i.ytimg.com/vi/WfPSA1A0NHc/mqdefault.jpg)
Installing one of your kits right now! Well made, Pro tip-7/8" uni-bit to the headlamp cover, notched a small semi-circular hole with a dremel just big enough to get one ear of the large connector through at an angle, and didn't need any electrical tape that way.
Wall Automotive Hahahah yes I am aware. The instructions mention this now.
What's really funny is seeing a KL built up like this (awesome), knowing full well it will have to have the lower balljoints replaced every 6 months if it actually hits the trail. I know, because I own one.
True LED do suck, a lot of other tubers share this opinion..at least for head lights. Ordering this kit with fogs asap. Thx for the vid. Oh and thanks for mentioning the lumen output at a distance, most vids just toss in a LED and say look mom it's brighter and move on. Not very technical especially when ppl need distance not area lighting. Trailhawk stock sucks in both distance and breadth for example when turning you are blind.
The ballast will get warm, but not burning hot. Our system is designed to mount to the factory frame rail tops, with the included hardware. If you want to zip tie it you may.
Really wish you would have done it on a normal front end, not all of us have the 2k front end🤷♂️
That’s why the written instructions show you how to do it on a factory front end.
@@jesselambros8520 ya but it does not show or say anything about what I am seeing. I only have one wire coming out of the headlights, where do I plug in the other wires? But thats what happens when you dont update the instructions properly and not do it an a 2k front end🤷♂️
@@XaPHaN1989 I am confused here. Our instructions show you how to do it on a stock front end. If you only have 1 wire coming out of your headlights, then your vehicle is missing another wire. The instructions are clearly laid out with pictures using a completely stock vehicle. What else do you need?
@@jesselambros8520 it has a phillips head light with only one wire coming out. None of anything with it fits the wire. When was the instructions last actually updated 2014? It's a 2017 and nothing fits. Nothing in the pictures is showing what I am seeing
@@XaPHaN1989 Please send us pictures as to what you are referencing. I am having a hard time understanding what you are talking about. Nothing about a philips head light is making sense to our system with just one wire coming out.
What’s the average life for these bulbs?
Hey y’all! Does the ballast get hot? Just wondering if it’s ok to zip-tie it up behind the housing to keep it out of the way. If it gets hot, I don’t want to do that as it would possibly damage other components in there.
Thanks!
are we going to get a video on how to install gas cap?
walter flores It is getting made this weekend
This is good, but doesn’t help if we don’t have the winch and still have the fenders all installed. What if we’re still stock?
We have PDF instructions available in the MFC garage. This shows how installation is done on a bone stock vehicle. We have a blurb about this in the description of the video as well if you missed it!
I just finished my install and the HIDs look great. I couldn’t get that rivet looking fastener off the bottom fender cover on my 2015 TH. What’s the best way to remove it ?
I have this kit installed on a used vehicle I purchased recently. What type off bulb is it that I can replace by going to AutoZone or something. I ordered replacement bulbs from your website, but I had both headlights go out on me. I need to pick something up in the meantime while I wait for my order to show up. Thanks!
What is your order number? We will expedite out a set, as i am not sure if Autozone carry’s HID bulbs
@@jesselambros8520 ORDER #MFC10539 . Thank you!
I've seen other hid kits can you just zip tie the ballast behind the dust cover and what wires did you run to the engine bay?
Nathaniel Parker this is a plug and play kit. No additional wiring is needed
@@jesselambros8520 ok thankyou I just ordered a kit
Did you replace the silica packet that is in the stock dust cover? if so ,where ? My concern is that it could be exposed to excessive bulb heat if it is not protected by being behind the fixture as it was when stock. I'm about to pull the trigger on your LED fog and HID Headlight combo but I'm unsure how important the packet is and a safe place to put it if necessary
BELL TIM some headlamps come with the packet and some did not. Don’t know exactly why. However you can place it inside the housing. Does not need to be taped as it will never be seen
What Kelvin and wattage is this hid? I can’t seem to find the specs on your website.
Vance's How-To's and Reviews Kelvin is 5000K and 35 watt
MFC Offroad everyone praises your hids as the perfect replacement for our halogen bulbs but it’s only 35 watts and not the brighter 55 watt ballast?
Vance's How-To's and Reviews we can make them in 55 watt, but have found it’s not as reliable to not throw an error message. 35 watt are golden, and with the light output 4x OEM, it’s not needed.
MFC Offroad 👍🏼good enough answer for me thanks. So i ordered both hid kit as well as fog light housing replacement. Still waiting on a shipped email.
Vance's How-To's and Reviews hid is ready for shipment, fog will be ready for shipment wednesday
Are these still around? The last comment was two years ago.
Absolutely! One of our top performing products to date!
Barely been 2 years & one bulb is out. Does that mean the other is not far behind??
how long do they last?
Where did you get the front bumper guard??
alvaro c we make it
How much?
James S $125