I BOUGHT the BEST Engine for my Abandoned E30 M3 Project!

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ม.ค. 2025

ความคิดเห็น • 238

  • @russellvw21
    @russellvw21 3 หลายเดือนก่อน +231

    Sick of big crazy builds with high end production. This is grass roots old TH-cam days. Love it

    • @superpug666
      @superpug666 3 หลายเดือนก่อน +3

      I call it real youtube

    • @z_855turboR
      @z_855turboR 3 หลายเดือนก่อน +2

      Yeah man this is stressfully tight space, this dude is a fighter:)

    • @rauhvelt
      @rauhvelt 3 หลายเดือนก่อน +2

      Definitely! Easily one of the best car youtubers right now.

    • @MegaDirtyberty
      @MegaDirtyberty 3 หลายเดือนก่อน +3

      Now if only he gets rid of the loud crappy music then it might actually be watchable.

  • @cessnas2
    @cessnas2 3 หลายเดือนก่อน +141

    Thank god you went with an S54 and not another fucking LS swap that basically every other american youtuber does

    • @AliasHSW
      @AliasHSW 3 หลายเดือนก่อน +4

      Hate LS swap everything!

    • @joevergnetti767
      @joevergnetti767 3 หลายเดือนก่อน

      Didn’t he LS swap his other BMW?! 😂

    • @AliasHSW
      @AliasHSW 3 หลายเดือนก่อน +2

      @@joevergnetti767 😆 true.

    • @RichardJamesWellingtonIV
      @RichardJamesWellingtonIV 3 หลายเดือนก่อน +3

      LS is better than anything

    • @sultankuto8724
      @sultankuto8724 3 หลายเดือนก่อน +4

      ​@@RichardJamesWellingtonIVtrue the ls is favoured for a reason it's reliable and compact

  • @plus790
    @plus790 3 หลายเดือนก่อน +37

    You made the right choice. I'm not against K swaps, but not in a "special" car like an older M3. Building a hot rod original motor would have been my top choice, but this is 1b.
    I'd love to see a half cage and no rear seats, and make the car light but still comfortable and quiet--a hot rod classic grand tourer that you could take on a nice coast to coast trip.

  • @antonyread5595
    @antonyread5595 3 หลายเดือนก่อน +27

    Just a quick note, e30 rear disk arms are worth selling on. They are worth a bit of money so don’t just throw them away

  • @macstar8317
    @macstar8317 3 หลายเดือนก่อน +4

    Finally, an American car TH-camr who didn't LS swap something! Great build and the perfect engine choice..

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน +5

      I LS swapped my E36 lol

  • @GiampyHUB
    @GiampyHUB 3 หลายเดือนก่อน +30

    my friend, I am writing to you from Italy and I have an m3 e46, I advise you to check the oil pump chain, you could bang, vanos, valve clearance and vanos overhaul... your works are wonderful

  • @NeilRobicheau
    @NeilRobicheau 3 หลายเดือนก่อน +21

    The S54 is an amazing engine. The last great naturally aspirated BMW straight 6. It’s a perfect choice for the E30 M3 that doesn’t have an engine.

  • @DJDinaggio
    @DJDinaggio 3 หลายเดือนก่อน +11

    I love these OEM Plus builds, basically modifying the car as it came from the factory with updated OEM parts to make it better to drive.

  • @twinturbo1989
    @twinturbo1989 3 หลายเดือนก่อน +8

    1:40 since you are reinforcing the oe subframe you are either s52 or s54 swapping. Commenting so that you keep building the e30 m3

  • @davidfisher730
    @davidfisher730 3 หลายเดือนก่อน +11

    As someone who has completely rebuilt an s54 from every single nut and bolt, and swapped into his e36 m3… I applaud the engine choice. Now having said that.. please take your time and go slow with the timing. These cars hate even the slightest variance in timing. Get a quality timing set, you can use Weisco for timing shim sets, stick with Geba as your water pump, replace and rebuild your VANOS with Beisan systems sets, get the oil pump puck redrilled for the timing set arms (known failure) uses Andrew’s swap harness (from the forum) euro headers are fantastic, but hard to come by, Status grüppe make a nice set, or go cheap and get Megan racing. Change your timing guide to the newer version, that should get you started

    • @matthiaskaiser1005
      @matthiaskaiser1005 3 หลายเดือนก่อน +2

      and take care with the camshafts they are hollow and bend very quickly if you not evenly losening and fasten the bearings.

  • @fw1421
    @fw1421 3 หลายเดือนก่อน +2

    I put 100,000 miles on my 1988 M-3 and never had any issues with rust/cracking and I spent 2 years in Boston. I even bought new shocks from Turner Motorsports when they were a new business. Nice guys. Whoever had owned this car abused it. You’re restomodding it will make it a nice play toy but will ruin its value. I’m amazed at how much E30 M-3’s have gone up in value. I bought mine in 1994 for $12k and it was in like new condition,not a scratch. The only downside is side was the S14 engine. It requires frequent valve adjustment that cost about $800-1000 every 8k miles. As my daily driver that clock wound up fast. Selling her was the biggest automotive mistake I’ve made in my 71 years. Best sports car I’ve ever owned.

  • @hogueraleksander5868
    @hogueraleksander5868 3 หลายเดือนก่อน +10

    The impact wrenches loose a ton of torque when you put an extension on it. FYI.

  • @michaelgallagher7885
    @michaelgallagher7885 3 หลายเดือนก่อน +3

    I would check the rod bearings while it is out of the car and easy :) Looks like you are on the right track as far as what to refresh. Water pump, tstat, oil filter housing gasket, valve cover, oil pan gasket, Constant Pressure Valve (CPV) oring!, idlers, etc. Rebuild the VANOS with upgraded Beisan Systems parts, plus check/replace the bolts holding the cam gears on, the upper timing guide, and get a redrilled oil pump disc. Use only the BMW OEM timing tools for the S54! BTW, $4k is a good deal on that engine. I just got my S54 out of my parts car onto a stand this weekend and have a pile of these parts awaiting to go in. Once it is refreshed it is replacing the M52 in my E36 track car.

    • @plus790
      @plus790 3 หลายเดือนก่อน +2

      He has receipts for the bearing replacements by the previous owner.

  • @terrygreen3148
    @terrygreen3148 3 หลายเดือนก่อน +1

    Did the same engine swap on my brother's 1985 325I AKA the M3 before the M3. This engine is a perfect match to the chassis and it stays reliable because your not pushing it to hard to make power.

  • @russellcurtis2825
    @russellcurtis2825 3 หลายเดือนก่อน +5

    Your getting better and better good choice with the engine it's gonna be a great build keep up the good work Matt
    Russell 🇬🇧

  • @becomematrix
    @becomematrix 3 หลายเดือนก่อน +8

    this s54 looks likes it had some oil changes but... not very often. A good engine cleaner would sort that right out.

  • @gregglen-hoodedratmedia
    @gregglen-hoodedratmedia 3 หลายเดือนก่อน +2

    Keep doing what You feel is right Matt, it's ultimately your cars. Enjoy

  • @deviceu
    @deviceu 20 วันที่ผ่านมา

    You are one Man Army. Best of luck with your projects!

  • @nickgadayev7507
    @nickgadayev7507 3 หลายเดือนก่อน +3

    Super excited for this one Matt! I swapped an s54 into my e30 almost 4 years ago now and absolutely love it! But I am getting ready to pull my swap out and put it into my e30 touring!

    • @z_855turboR
      @z_855turboR 3 หลายเดือนก่อน +1

      Wow that is awesome!

  • @MikeDDtwo_detailing
    @MikeDDtwo_detailing 3 หลายเดือนก่อน +1

    Looking forward to see the progress on this build. Great combo of car and power plant. I had an E46 M3 years ago and loved that car and the engine was superb.

  • @keithmason5584
    @keithmason5584 3 หลายเดือนก่อน +4

    You need to pull the rod caps and inspect the bearings individually then re-torque , disaster waiting to happen if that bottom end is worn 👍

  • @kraignadjkovic5494
    @kraignadjkovic5494 3 หลายเดือนก่อน +1

    That rear subframe with the disc brake hubs and control arms is useful for someone upgrading a 318 E30.

  • @hardforeveryone118
    @hardforeveryone118 3 หลายเดือนก่อน +4

    rip to your shop tv from all those welding and grinding pits.... anyway love the content!

  • @elroyjacobs8126
    @elroyjacobs8126 2 หลายเดือนก่อน

    Geeze, why did I only find this TH-cam channel now??? You're a hard worker bro. Love your content.

    • @matt13ross
      @matt13ross  2 หลายเดือนก่อน +1

      Glad you’re here now!

  • @thermionics
    @thermionics 3 หลายเดือนก่อน +3

    S54 engine is definitely a sweet motor, but if you wanted reliability, you missed a huge opportunity to go with an N52. 255hp / 230ft/lb of torque, and 150lbs less weight. Oh, and with a simple flange replacement, the S54 headers bolt right up...

  • @Pazzzur
    @Pazzzur 3 หลายเดือนก่อน +1

    once you said it's gonna have a 6 speed from a e46 m3 i just knew it's gonna be the S54, gotta love the allmighty 3.2 I6 with itbs

  • @grantbotha7438
    @grantbotha7438 3 หลายเดือนก่อน +1

    So impressed with your choice of engine. This is going to be one sweet car when its done! Great job!

  • @ognjenobradovic9080
    @ognjenobradovic9080 3 หลายเดือนก่อน +1

    bmw engine S54 perfect engine
    The big problem you need to do and pay attention to is to replace the mandatory springs on the cam in the head. they stretch out and create a problem.
    must get some better substitutes. Your project is excellent.
    All the best 👏👏👏👏

  • @GrowMau5
    @GrowMau5 3 หลายเดือนก่อน

    I’m so impressed with this project, you made the right choice with the S54! Can’t wait to see more

  • @travis4161
    @travis4161 3 หลายเดือนก่อน +1

    If you can source Euro headers, that'll be the ultimate OE+ option. Otherwise supersprint headers is a nice option

  • @Mtpktz
    @Mtpktz 3 หลายเดือนก่อน

    Excited to watch this build! I'd recommend Supersprint Full-stepped V1 headers for the S54. Also hope to see (and hear) a Karbonius CSL intake!
    Another piece of advice - use OEM BMW Gaskets (especially valve cover), otherwise you'll be re-doing the job, even using OE (Elring).

  • @shrades
    @shrades 3 หลายเดือนก่อน

    Best car channel. Feels like I'm in the garage with you. Also you make very informative videos, they are not only entertaining, although they are very entertaining!

  • @4444Muzik
    @4444Muzik 3 หลายเดือนก่อน +1

    Congrats on 100 👍

  • @CrocketGoesBoom
    @CrocketGoesBoom 3 หลายเดือนก่อน +2

    2:59 bless you

  • @manqkasgarage6215
    @manqkasgarage6215 3 หลายเดือนก่อน +2

    18:31 Take a rod cap of to see the bearings,you are already there.

  • @WildfyreCreations
    @WildfyreCreations 3 หลายเดือนก่อน +1

    Just check all your cooling aspects to the engine especially with the E46 M3 engines. Other than that they are bullet proof

  • @Djinn112
    @Djinn112 3 หลายเดือนก่อน

    Gratz man to 100K subs 🎆. If you keep the videos regularly coming the subs will go up fast from now on.

  • @TheFlash8889
    @TheFlash8889 3 หลายเดือนก่อน +1

    Glad you went for the S54 - K20 or something would have been nice in another car but an M3 deserves a BMW engine :)

  • @seansmile
    @seansmile 3 หลายเดือนก่อน +1

    NUT BUSTING TORQUE 😂 excited for the rest of the build too

  • @M50E30
    @M50E30 3 หลายเดือนก่อน +1

    best chassis going with the best motor this build is going to be awesome

  • @bobbrown6281
    @bobbrown6281 3 หลายเดือนก่อน

    I worked for BMW North America for three years. And also worked for two dealer Ships. At one of the dealerships two of the mechanics
    installed a motor out of a 7 series motor in a Early 320 I. It was scarier fast but the problem was you could not stop the car so they had to
    adapt the 7 series brakes to the car so it would STOP the car.

  • @bernardthefourth
    @bernardthefourth 3 หลายเดือนก่อน +1

    Good engine choice. Congrats on 100k subs!

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน

      Thank you!

  • @098cpt
    @098cpt 3 หลายเดือนก่อน +1

    Great choice, hard to decide. Always wanted a V8 sound car that didnt came with a V8, but LS swap are too common and BMW V8 (all of them) were not the best. However when you know them, no issue to use them as they should, with elbow grease.
    S54 are great, but sound wise not the best. N52 sound better , cheaper and can get close to the 300bhp figure with a 3 stage manifold, full exhaust and aggressive tune.
    I personally went with N54, single turbo : because they sound as good 1jz or even the 2jz, they are wayyyyyy cheaper. But maintenance wise initial cost, wow , what a rip off, those engine need a lot of love to be reliable.

  • @edirty9
    @edirty9 3 หลายเดือนก่อน +2

    Need that E92 M3 content

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน

      Coming

  • @matthiaskaiser1005
    @matthiaskaiser1005 3 หลายเดือนก่อน +1

    good desision for the s54 engine. An original M3 must have an original M Engine otherwise it is worthless.

  • @Imolabren
    @Imolabren 3 หลายเดือนก่อน

    Great choice for the engine. Either S54 or an S14 is the way to go on these imo

  • @charha01
    @charha01 3 หลายเดือนก่อน +1

    Nice screeeeeeeeetch at the end. Very fitting for October.

  • @cm-ex8nb
    @cm-ex8nb 3 หลายเดือนก่อน +1

    am M3 deserves and M3 engine. the K20 would have been super cool too but I think this is the right choice.

  • @johankarlen53
    @johankarlen53 3 หลายเดือนก่อน

    You should probably replace the oil pump with an upgraded one as preventive maintenance. The oil pump nut tends to loosen, which can lead to a loss of oil pressure. Congrats on reaching 100k!

    • @tino6754
      @tino6754 3 หลายเดือนก่อน

      I am not an Expert for S54 but isn´t the oil pump nut only a problem on the M54 if you set the limiter to 7000rpm?

  • @franbrumec605
    @franbrumec605 3 หลายเดือนก่อน

    Great build and bless you😂 (3:00)

  • @midlifecarsis6420
    @midlifecarsis6420 3 หลายเดือนก่อน +1

    Sorry man, those are OEM bolts. ARP have an impression in the centre (for a stretch gauge) and are marked as ARP. It doesn't mean the bearings weren't done but it's a strange choice to use OEM bolts.
    Perfect choice of engine though.

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน +1

      Thanks for the info!

  • @jamiepollard9735
    @jamiepollard9735 3 หลายเดือนก่อน

    Matt you produce high quality, funny content but it's also consistent. That's what we call "The triple threat".

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน +1

      Glad to hear that. Thanks!

  • @mackallred6296
    @mackallred6296 3 หลายเดือนก่อน

    Lets go S54 is by far my favorite m engine right in front of the s65

  • @joevergnetti767
    @joevergnetti767 3 หลายเดือนก่อน +7

    Audi i5 turbo? That would be sacrilegious, but sound awesome!

    • @RichardoMilos
      @RichardoMilos 3 หลายเดือนก่อน

      Hell yea

    • @Mart77
      @Mart77 2 หลายเดือนก่อน +1

      3 series BMW has to be either inline 6, V8 or V10 - no other option.

  • @craitex8171
    @craitex8171 3 หลายเดือนก่อน +1

    10:30 I didn't know The Weekend was a mechanic and is selling engines

  • @trevorforbes2382
    @trevorforbes2382 3 หลายเดือนก่อน +1

    Go get some of the new bite husky stuff. Might help on those old stripped out full of paint hardware

  • @d_rock_t
    @d_rock_t 3 หลายเดือนก่อน +2

    280-300whp in an E30 is the sweet spot.

  • @Sheer_Will
    @Sheer_Will 3 หลายเดือนก่อน

    8:25...well I mean you are using a 1/2-3/8 reducer and an extension...lol all that flex, tolerance stacking, and lost mass is the issue my man. This is turning into such a cool car though man, keep going!

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน

      Yes I know. But still I was surprised lol

  • @2003m5
    @2003m5 3 หลายเดือนก่อน +1

    Another awesome choice would be an S58 3.0L M-motor or a B58 3.0L motor from a new BMW SUPRA

  • @albertolandi4258
    @albertolandi4258 3 หลายเดือนก่อน +1

    19:12 i've already heard this somewhere hahah

  • @eow11blue
    @eow11blue 3 หลายเดือนก่อน +2

    Check the rood bearings bro while you are still there ;))

  • @tcphoto
    @tcphoto 3 หลายเดือนก่อน +1

    I can only hope that it's an S54, nothing like jumping ahead two generations and installing one in a lighter E30 M3...3,2,1...

  • @craigrobertson7938
    @craigrobertson7938 3 หลายเดือนก่อน +1

    If possible original wire spoke bbs wheels like the original would be awesome

  • @iacopotuttino5515
    @iacopotuttino5515 3 หลายเดือนก่อน +1

    Very cool!! Is that engine a US spec or Euro one? Probably 6 into 1 stepped headers can help sound and performance

  • @timothyjones6476
    @timothyjones6476 3 หลายเดือนก่อน

    Congrats on 100k subscribers!

  • @eskopar
    @eskopar 3 หลายเดือนก่อน

    Nice black wheels on the 997 🎉

  • @toxaq
    @toxaq 3 หลายเดือนก่อน +2

    Gave me a heart attack when you said LS1. S54 is brilliant.

  • @realcarbonking
    @realcarbonking 3 หลายเดือนก่อน +1

    Grats on 100k!

  • @Jagman2919
    @Jagman2919 3 หลายเดือนก่อน +1

    Hey Matt, use some of that famous window cleaner on this floor oil stains!!!!😂 just teasing…great video as always. Bro you need more room. Time for a different home with a shop.

  • @christopherbellisario9195
    @christopherbellisario9195 3 หลายเดือนก่อน

    Love the engine decision!

  • @mrt7152
    @mrt7152 3 หลายเดือนก่อน +1

    You should have gone with the K20.

  • @joshl365
    @joshl365 3 หลายเดือนก่อน

    Excited to watch this project through. Did you get rid of the purple BMW?

  • @darkviper62
    @darkviper62 3 หลายเดือนก่อน

    So nice to see a build like this sick of super and vag car rebuilds.

  • @Bmwalfaromeo
    @Bmwalfaromeo 3 หลายเดือนก่อน

    For headers, either save money and get ebay headers or spend the bucks and get STEPPED headers. In-between is a waste of money unless you get it free from a sponsor. So happy to see you choose an s54!

  • @Tshimologo.Q
    @Tshimologo.Q 3 หลายเดือนก่อน

    I gotta say you went with the S50

  • @E90m3superchargedGr
    @E90m3superchargedGr 3 หลายเดือนก่อน

    Nice job brother keep up your hard work

  • @davable2505
    @davable2505 3 หลายเดือนก่อน

    This is going to be a fantastic car!

  • @davable2505
    @davable2505 3 หลายเดือนก่อน

    You should find someone with a vapor hone and make all the aluminum look better than brand new. Although I guess you're already replacing most of the aluminum parts.

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน

      A lot is going to be replaced for sure.

  • @LouisEguchiWale
    @LouisEguchiWale 3 หลายเดือนก่อน

    Is there a mode on your camera that moves less like only when it needs to put you in frame? Long time fan still watching!

  • @alfyer5
    @alfyer5 3 หลายเดือนก่อน +1

    Hope it’s a s54
    Edit:
    Yesssss

  • @ayanlelajuna112
    @ayanlelajuna112 3 หลายเดือนก่อน

    That is the right engine matt for the e30. What's the update on the E92 M3?

    • @matt13ross
      @matt13ross  3 หลายเดือนก่อน +1

      I think so too! (obviously) E92 is painted, but still haven't located an engine for it.

  • @2003m5
    @2003m5 3 หลายเดือนก่อน

    You should run a 2JZGTE non vvti or vvti with a TREMEC 6 speed manual.

  • @jaxblaster84
    @jaxblaster84 3 หลายเดือนก่อน

    Literally as your undoing the oil pan bolts, im saying he checked and made sure their wasn't oil in there right lol

  • @rossmischnick
    @rossmischnick 3 หลายเดือนก่อน

    Don't know too much about BMW powertrains but glad you kept it BMW

  • @adcampo7601
    @adcampo7601 3 หลายเดือนก่อน +1

    You should confirm those are APR bolts.

  • @florider_hd
    @florider_hd 3 หลายเดือนก่อน

    S54 and k24 are perfect for the e30 both for different reasons

  • @vxracing380
    @vxracing380 3 หลายเดือนก่อน

    12:06 slap a supercharger one it!

  • @emersonc1210
    @emersonc1210 3 หลายเดือนก่อน

    Good choice. Honda motor swaps sound fun until you have to drive it anywhere thats not a track

  • @jandkwhite6459
    @jandkwhite6459 3 หลายเดือนก่อน

    Should definitely do the ac compressor while youre in there....that will SUCK to replace after its all done

  • @grahamalldred7769
    @grahamalldred7769 3 หลายเดือนก่อน

    Great build 👏. Would you sell it when finished? If so how much ?.

  • @_alphagamez_5425
    @_alphagamez_5425 หลายเดือนก่อน

    sounds better after the wire change

  • @Mart77
    @Mart77 2 หลายเดือนก่อน +1

    Makes me happy that you're not putting and honda stupidity into an M3. That would be like swapping 1.9tdi into a Lamborghini

  • @ognjenobradovic9080
    @ognjenobradovic9080 3 หลายเดือนก่อน

    My nickname for that engine is the slant hood 😉😉😉

  • @joe_ferreira
    @joe_ferreira 2 หลายเดือนก่อน

    Congrats on 100k

    • @matt13ross
      @matt13ross  2 หลายเดือนก่อน

      Thanks so much!

  • @Level461
    @Level461 3 หลายเดือนก่อน +1

    Do a k swap mr2 next

  • @bigospig
    @bigospig 3 หลายเดือนก่อน +2

    Receipts for rod bearing replacement? If you don't personally know the seller and there is not an engine serial number on a shop installation receipt, remember the motto: Trust but verify.

  • @raelsadd
    @raelsadd 3 หลายเดือนก่อน

    3:34 don't think we didn't see that

  • @chrisgreen1094
    @chrisgreen1094 3 หลายเดือนก่อน

    I haven’t seen what choice you went for but S54 is the only choice for an E30 M3.

  • @stephenjohnpersarth7455
    @stephenjohnpersarth7455 3 หลายเดือนก่อน

    😂 welding and grinding next to the tv

  • @AliasHSW
    @AliasHSW 3 หลายเดือนก่อน

    Hate LS swap everything. Like the Miata, it is not always the answer. 😆