DJI Mavic Gimbal Fix - Quickest best way to change your Mavic drone gimbal

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • If you are getting an error message that says: "gimbal obstruction" and the gimbal calibration does not fix the error, you most likely have a bad gimbal. This video will show you how to quickly and easily change the 4K gimbal for the DJI Mavic Pro drone. Look below for a list of everything that you're going to need.
    More clips and pictures that didn't make this video
    / alexedit
    / urbandrones
    My company
    www.urbandrone...
    Equipment I use on my videos
    Editing Software:
    Adobe Premiere - www.adobe.com/p...
    (affiliates)
    Cameras:
    Canon 70D
    amzn.to/2wnWRCl
    Sony RX100v
    amzn.to/2ire8F2
    GoPro 5
    amzn.to/2wnOGWJ
    Lenses
    amzn.to/2xcXUTe
    amzn.to/2w3EOik
    Drones:
    amzn.to/2vYGtar
    www.urbandrone...
    dji mavic Gimbal: amzn.to/2yz6ONw
    Hex 1.5mm tool: amzn.to/2zmInke
    flat head driver: amzn.to/2yzlzzS
    silicone glue: amzn.to/2zACuRk
    dji mavic: amzn.to/2yzIoU9
    Inquiries:
    Alexedit@gmail.com

ความคิดเห็น • 65

  • @FlyersDistrict
    @FlyersDistrict  7 ปีที่แล้ว +2

    If this fixed your issue, please report back. If it didn't, let us know how you fixed it. thanks!

    • @jameslama5049
      @jameslama5049 7 ปีที่แล้ว

      I have the same problem, I dont normally use the gimbal clamp while travelling. I faced the gimbal motor overload error. My gimbal reacts exactly like yours. May I know your mailing address for repairs and the cost?

    • @FlyersDistrict
      @FlyersDistrict  7 ปีที่แล้ว

      James Lama my email is on the description-

    • @chrake
      @chrake 6 ปีที่แล้ว

      WHY IN THE WORLD would you replace the full gimbal and camera part when it's only the flat ribbon cable that has been damaged. That is a GBP 15 cost repair vs over 300 pounds for a full replacement. Do I miss anything here - maybe you just want to sell the full replacement kit?

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      Christian Åkerlund because it wasn't the cable

  • @BufordTJustice20
    @BufordTJustice20 3 ปีที่แล้ว

    Just changed the gimbal on my Mavic Pro. Very helpful video. Thank you for posting this.

  • @sunshynff
    @sunshynff 5 ปีที่แล้ว +1

    Great video!! Totally agree with you on the length of the video, nothing against some posters, their info is usually very good, but when I'm frustrated over needing to fix a drone, I want the video to get to the point and show me what I need to know. Cheers!!

  • @jefftrowercreative
    @jefftrowercreative 3 ปีที่แล้ว

    Thanks for the info. I had to replace the plate the camera attaches to. The bands seem to have stretched a bit and used your process with a little deviation, but in the end was a success.. OHHHHHHH YEEAAAHHHHHH! Thanks again

  • @jimbubbatube
    @jimbubbatube 7 ปีที่แล้ว +2

    This is awesome! Thanks for making it look so easy.

  • @BluegrassPreservationVideos
    @BluegrassPreservationVideos 6 ปีที่แล้ว

    Had a user error crash and had to replace the gimbal. Thanks for the informative How To.

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      Bluegrass Preservation so glad I could help and you’re back flying.

  • @carlosadvisorinternational
    @carlosadvisorinternational 3 ปีที่แล้ว

    Great video indeed, thank you for sharing it. hello from Nicaragua amigo. I had the same issues, I replaced the gimbal with no problems, all fine, but when I am flying the camera films with waves line in the video, the stability of the gimbal is great but the video is not stable. Any suggestions, thank you!

  • @GolfTesla
    @GolfTesla 3 ปีที่แล้ว

    This video is well made, as you show exactly which screws to touch and how to dissassemble and assemble pieces - removes a bit of the scare...
    You could have said, though, which kind of screwdrivers or other tools you should get or have: / I came across this video as I occasionally (note: not always) get heavy gimbal shake (sometimes with, sometimes without an "excessive vibration" warning) and that is absolutely useless for films for my Golf&Tesla channel (I use the drone mainly for my golf course reviews, views of Tesla superchargers from above, and occasional landscape footage). If I can avoid it though, I don't want to take the drone and camera/gimbal apart...

  • @sonic19054
    @sonic19054 7 ปีที่แล้ว

    Ohhhh mannn that's pure nostalgia seeing it work at the end

  • @kinrettler2431
    @kinrettler2431 5 ปีที่แล้ว +1

    subbing due to the song and instructions

  • @DITRH
    @DITRH 6 ปีที่แล้ว

    So I am trying to remove the screws (with the right tool) an 2 of there are already stripped before I even try. I got one out with a flat head but the other top screw is not turning. They came this way from DJI. My drone was replaced under warrantee and they gave me a refurbished one which I was not happy about. Now I am stuck. Any suggestions?

  • @DITRH
    @DITRH 6 ปีที่แล้ว

    I have the new camera and gimbal and will try and replace. What state are you located in?

  • @JltCoIl
    @JltCoIl 3 ปีที่แล้ว

    Grate demo.

  • @MrBerenguer67
    @MrBerenguer67 3 ปีที่แล้ว

    Hi thank you four your video I have a Mavic Pro and now is Said remove the clamp the camera is hoverloding what you thing it is thank you very much

  • @makskuharenko1123
    @makskuharenko1123 6 ปีที่แล้ว +4

    best video about replacement, But men, why you just not replace only the cable ?

    • @strawberriesanddeath
      @strawberriesanddeath 6 ปีที่แล้ว

      Maks Kuharenko that's what I thought too.

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว +1

      Maks Kuharenko That’s the first thing I did while troubleshooting, so I ended up replacing the whole thing

    • @r.s.overland6134
      @r.s.overland6134 6 ปีที่แล้ว +1

      why not replace only the gimball and not the camera. It's 5 time cheaper

    • @sunshynff
      @sunshynff 5 ปีที่แล้ว

      @@r.s.overland6134 I'm checking prices now, I know it'll be more expensive, but I DO NOT want to mess with that ribbon. I've watched a bunch of tutorials on it and once tried doing it myself on a Phantom 4 camera, too intricate. I get frustrated to easy I guess..lol.

    • @r.s.overland6134
      @r.s.overland6134 5 ปีที่แล้ว

      @@sunshynff the camera is just snap on the gimball ifi remember when i change it. So it's 90% like changing the Gimball just you keep the tiny camera

  • @daviderossi9246
    @daviderossi9246 6 ปีที่แล้ว +1

    Hi, I have the same problem that you showed in the video. But mu error message is: "motor overload". Do you think it's the same error? How can I know if the problem is the ribbon or the complete gimbal? I'm asking this because of the big difference of price between the 2 . Thanks!!!!!!! Davide from Italy!

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      davide rossi the only way to find out is by changing the ribbon cable and if this doesn’t work, then you have to change the whole gimbal.

  • @richardvoisin6080
    @richardvoisin6080 5 ปีที่แล้ว

    Thanks for this video. I successfully mounted my new one, and it works beautifully... except the vision front left and front right won't work anymore. It's spitting out errors. Any suggestions? I think I'll open it back up and check the cable connections over the gimbal itself...

    • @FlyersDistrict
      @FlyersDistrict  5 ปีที่แล้ว

      Try going in the control settings and doing a gimbal calibration. Also reset the gimbal to factory settings. Please report back to help others

    • @richardvoisin6080
      @richardvoisin6080 5 ปีที่แล้ว

      @@FlyersDistrict I got it working. I opened it back up and took all the cables out and reseated them. BINGO! :)
      Thanks for the response!

  • @leitesrec5087
    @leitesrec5087 6 ปีที่แล้ว

    Excellent video!
    My mavic apart from having problems with the gimbal as samples in the video the camera does not seem to communicate with the drone. The image is all black. I will solve by replacing the gimbal or I need to change another component such as flex?
    Thank you

    • @yosoydeyarumal
      @yosoydeyarumal 5 ปีที่แล้ว

      you need the other cable. the ome with lots lof wires. thats the video

  • @unluckyeddie6967
    @unluckyeddie6967 3 ปีที่แล้ว

    I have an error coming up says check gimbal clip how can I fix that

  • @surplusdriller1
    @surplusdriller1 4 ปีที่แล้ว

    What is the smal pcb hanging where the broken of leg was? Antenna?

  • @mswartz
    @mswartz 4 ปีที่แล้ว

    Can I fix the gimbal on my mavic mini? The black part holding the camera to the drone broke and split, not completely but a lot. Just happened.

  • @rhemwylde4781
    @rhemwylde4781 4 ปีที่แล้ว

    My gimble came off the little clip it locks into but everything is attached ill try this method to connect it

  • @SevenClue
    @SevenClue 4 ปีที่แล้ว

    i see :( my drone was broken.
    but when i flip the gimbal when they doing calibrated. this work excelent. but not for 5-8 minutes

  • @upthere8367
    @upthere8367 5 ปีที่แล้ว

    About how long to replace if continual without stopping.

  • @mh95ric
    @mh95ric 6 ปีที่แล้ว

    Same problem. Always forgot to put back the gimbal clamp :(

  • @ronpendergast5036
    @ronpendergast5036 6 ปีที่แล้ว

    Excellent how 2 Video

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      Ron sheets thanks. Hope you subscribe

  • @unluckyeddie6967
    @unluckyeddie6967 3 ปีที่แล้ว

    How much is the pice?

  • @funkylosik
    @funkylosik 7 ปีที่แล้ว

    I hope you are using protective cover now))

  • @advranairfanshahid2816
    @advranairfanshahid2816 6 ปีที่แล้ว

    i am having a problem with DJI mavic pro, i shaked the drone very harshly and after that the camera wasnt stable and after some time it also left to give image on mobile.

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      Adv Rana Irfan Shahid go in the app and reset the gimbal. If that doesn’t work, it could be the cable.

    • @advranairfanshahid2816
      @advranairfanshahid2816 6 ปีที่แล้ว

      Flyers District how to reset??

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      Adv Rana Irfan Shahid it’s in the camera menu in the app

  • @r.s.overland6134
    @r.s.overland6134 6 ปีที่แล้ว

    How to replace the gimball but NOT the camera? as gimball cost 30€ the gimball + camera cost 170€....

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      R.S. Overland I don’t think they sell the camera by itself.

    • @r.s.overland6134
      @r.s.overland6134 6 ปีที่แล้ว

      yes you can buy it

  • @GaboRamosPR
    @GaboRamosPR 5 ปีที่แล้ว

    Aircraft Disconnected Error :(

  • @austinenwankwo4462
    @austinenwankwo4462 6 ปีที่แล้ว

    pls my dji mavic is not okay de motor is not working how can i fix it ?

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      austine nwankwo how did that happen? Did you crash it?

    • @austinenwankwo4462
      @austinenwankwo4462 6 ปีที่แล้ว

      Flyers District it hooked on wire and before I could reach there it hits the ground and was not able to fly ,but every other thing is working

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      just gotta change that motor

  • @anandchaudhary8952
    @anandchaudhary8952 4 ปีที่แล้ว

    so basically my dgi gimbal is fucked!!

  • @yosoydeyarumal
    @yosoydeyarumal 5 ปีที่แล้ว

    he looks like a funny fish....

  • @lubetube12341
    @lubetube12341 6 ปีที่แล้ว +1

    Good Video my friend. My Mavic Pro camera will not focus or respond on autofocus. I have updated firmware reset camera setting but makes no difference. Any ideas? I would really appreciate some help on this.

    • @FlyersDistrict
      @FlyersDistrict  6 ปีที่แล้ว

      Derek White did you get this resolved? It’s possible that an internal lens moved inside the camera due to vibration.