Funny to see so many people calling this click bait because they ASSUMED the laser in the DVD drive had anything to do with the project. I wonder if any of you ever built anything in your life. To make the CNC aspect of this with just the mechanical guts of 2 DVD drives, an Arduino, and some scrap aluminum/wood/screws is incredibly impressive. Well done, Daniele!
I love that project, thanks for sharing! If you mount the bottom plate at the top (the x-axis) you could construct the device in a way that you can place it on any size of sheet to engrave. Due to the fact that I often want to burn a small logo on bigger sheets of wood or plastic I will try to build it that way round. The engraving size stays the same but you can place it on e.g. a table and engrave that with your logo. :D Keep up the good word, Daniele.
@@Dancopymus check out the kkmoon laser engraver in comparison with a small neje engraver on ali express and you will understand what I mean. ;) I mean instead of burning on a bottom plate do not use a bottom plate and leave it open. Therefor you need to turn the construction upside down. Hard to explain but pretty simple to do... do you get what I mean?
@@Dancopymus What he means is he can use this on a large piece of wood to engrave small things on it. So the bottom axis no longer moves as it's attached to the top carraige.
Gran progetto! Il laser ha una bella precisione, non pensavo così tanto, ottima anche la scelta di riutilizzare i meccanismi dei lettori ottici.. Complimenti :)
Ti ringrazio Ivan, la cosa più bella che porta questo lavoro è leggere i vostri commenti, sono molto lusingato, in particolar modo per la tua considerazione sul lato "umanistico" Grazie.
WOW that was an awesome video! Very informative without talking! You've captured a great deal of information without all the chatter. Many people out here like myself learn from watching. I tend to loose interest when someone is talking about what they're doing instead of doing it. They will spend 20 talking about it and 10 minutes showing, while you're video wasn't even 20 minutes long! Incredible !
Veramente una figata, complimenti!! Piuttosto io proverei a posizionare una ventola che permetta alla superficie da incidere, di raffreddarsi più velocemente al passaggio del laser, in modo da avere delle linee più definite. Proverei anche a sfruttare come sistema di pilotaggio del laser dei BJT usati come interruttore, che cambierebbero il loro stato più rapidamente rispetto ad un relè, che a parer mio potrebbe non rispondere bene a impulsi molto rapidi tra accensione e spegnimento.
He has to tell it to us, even if we know it. These are elementary security rules. There are still people who don't know it and could look at the laser, burn their eyes and then make Daniele responsible and pay for not having warning us. Now, nobody can tell he didn't know.
@@johnnybravo2342 i'm French so I write english as i can but I think I understand the difference between the two terms. The best of both seems to be : your shouldn't. Am i right?
He could have and should have but he is dumb as hell and thinks that someone, who is going to make this, will not know how to take apart a damn DVD drive
I'll try to watch this again when I'm not tired, but those fast jump edits are really difficult to follow. I know it's a long process and it's a method shortening it, but I didn't even make it to half way. Nice work, great ideas.
Hi, you should be using a mosfet instead of a relay, the mosfet will last longer and can activate and deactivate faster than the relay, making the lines more sharpen.
Hi, I know, but I'm trying to improve the CNC with the next videos. At home I didn't have a Mosfet, but only a relay module. In the next videos I will update. Thank you for your comment.
I was doing the same project and this guy beat me on time and I used a mosfet, btw I am still waiting the most important part... the laser lol Canada suks to have material you need to wait forever lol
No me canso de ver sus vídeos, es un placer verlo trabajar y crear, de esa forma tan bonita y pulcra. Muchas gracias, estoy aprendiendo mucho de usted a mis sesenta años.
Audio or detail description, schematic, part file programs would be appreciated. If you really want to motivate others to give it a try. Great concept by the way. Your hard work deserves recognition.
Ottimo progetto! Ricordatevi di mettere sempre gli occhiali protettivi, col laser basta un frazione di secondo per diventare ciechi a vita! Nota: basta anche un riflesso, non te ne accorgi neanche, e ti ritrovi un buco nella retina, col laser non si scherza.
Bravo, hai fatto bene a scriverlo. Mannaggia a me che mi sono dimenticato di fare un' annuncio ad inizio video sul' importanza di usare gli appositi occhiali.
Magari rivestire la cnc con panelli dello stesso materiale degli occhiali, in modo da aumentare la protezione in generale e in più proteggere anche le altre persone che passano vicino
@@davidedellapasqua2 Bellissima idea. Mi piacerebbe portare alla fiera del' anno prossimo le mie creazioni e mi sono detto, e come faccio con questa? non posso certo farla lavorare con la gente che passa e che si ferma allo stand :-) oppure mettere uno scatolone pieno di occhiali.Ottima soluzione, speriamo si trovino in commercio dei pannelli con le stesse proprietà filtranti degli occhiali. Grazie :-)
@@DanieleTartaglia Di nulla, siamo noi che dobbiamo ringraziarti per i fantastici contenuti che porti sul canale! Per quanto riguarda i pannelli con queste caratteristiche non me ne intendo molto, ma credo che facendo una buona ricerca non sia difficile a trovarli ;-)
Hey paesano. This project is awesome. I also noticed that, as a good Italian, you speak with your hands, no need to talk or to write captions. Bravo. I'll try to build one myself following your steps. Grazie maestro.
3:04 Those 4 wires you attached to the ribbon cable end...they just go to the motor where there are 4 big solder spots right? Why didn't you just solder directly to those? 🤔
Tbh it's kinda hard to solder directly to the motor wires, plus if you mess up, then you ruin a motor. If you mess up on the ribbon or connector, you just cut off a piece or get a new connector
Amazing- I may do this one!! Thanks for sharing your rad innovative projects!! Something very useful and a HUGE time saver: if you have a carbide-tooth blade mounted on your table saw ( fairly common today), it is perfectly fine to use bcutting the soft aluminum components. The angle stock and even the tubing can be cut without suffering any damage or premature wear as it is Much softer than tungsten carbide. (Mohs scale: Al=2.5-3 Tu/Ca =8.5-9) you get the time savings as well as straight consistent results as opposed to hacksaw or other non-fixed methods
Incredibile come al solito,visto le tue grandi capacità ho un'idea per te,una specie di stampante 3d con blocco Cnc-autolivello-ditributore pasta saldante per creare pcb faidate,e ovviamente il piatto riscaldato così basta appoggiare i componenti nelle proprie sedi.FIGATA PAZZESCA!!!!! (esistono già ovviamente ma partono da 4.000€ lol.Grazie
Its incredible.. i was randomly watching CNC videos through youtube and this one by the workmanship i notice something extraordinary.. and then when i saw your face at 14:35 i was almost sure you were Italian! at 17:40 i was 100% sure for the "flash di macchina" Im sorry about my coment but i need to do it! im very fan of Italians for their extraordinary abilities, they are like Japaneses but with European style Thanks for the well done DIY! Greatings from Portugal!
For the bed, consider using high density polyethylene (hdpe). Kitchen cutting boards are a good source. You can cut them with wood working tools, but also do things like tap then for bolts.
Hello! By any chance do you have a list of all the parts such as the screws, washers, rubber fittings etc as well as their size or length and how many? Thank you and great video!
Hello from Poland. You did a very nice project 👏👏👏👌👌👌. I am respectful. But unfortunately, I have to wait for 30,000 likes to find out more details (like wireling etc.) and about firmware & software. I subscribe your channel, so maybe someday you'll provide all the guidelines (like roughly dimensions, "how to..." etc.) I wish you good luck in your next projects. Andrew, Poland.
Hi am from poland too, keep like from mexd He did nice job here but as You mentioned its not enough of essentials and substantial info described in this project which they would be very helpful and useful for most people who really want to achieve smth like this project. So I'd very pleased along with everyone who want it if author of this video would update it with more particular info, even including it only in bottom text. thx
Uno with a ramps shield. You'll find most of the details by searching on arduino ramps and reprap. It shares a lot of ancestry with some of the earlier 3d printers.
Excellent! Very professional work, awesome created video! Very clean work area, professional tools! Maybe my unique disappoint was the walking power supply in minute 17:07 ... *lol*
Infatti, è semplicissimo . Ho fatto fatica con la parte Software, ma una volta conosciuto i parametri e con un disegno ben ottimizzato, potete realizzarla tutti.
@@DanieleTartaglia Sei come i compagni che il giorno della verifica dicono che non hanno studiato ed alla fine prendono 10, porco can io ci metterei 3 giorni solo per capire da dove iniziare, senza tenere conto che non ho nemmeno tutti quegli strumenti xD
@@danieletartagliafaidate Ciao Daniele, sto iniziando a costruire la tua cnc e aspetto con ansia la tua guida o almeno qualche dritta sulla configurazione software......Grazie
Congratulations! Excellent project. I would like to do something like this, do you have any drawings or specs where I may see dimensions of base boards, screws, springs etc.? Thanks
I wanna see you incorporate a scanner module for a computer so you could scan and format to actual size and then run it through your machine and would burn that basically just plug in from the copier that would be something I’d like to see you bro you do good work. Love your videos keep up the good work.
He's using BenBox. I had trouble finding a reliable download for it. Any open source GRBL software should do it, but lasergrbl.com/ is specifically for laser engraving.
Grazie per la dritta, conosco il problema purtroppo, bisogna evitare di fare le immagini dal' alto perchè potrebbe riflettere. Comunque per questo tipo di riprese uso la Canon 6D mk2 per una questione di versatilità. :-)
Piuttosto bisogna stare attenti per se stessi perché si adopera laser di classe IV, classificati come pericolosi per gli occhi e pelle. Inoltre su superfici riflettenti potrebbero causare incendi. Quindi occhio ragazzi!
Great DIY video. I'm going to start working on it. The idea of being able to place it on an object to laser engrave our logo onto our product. I'm having trouble finding the laser unit though. Will a 300mw unit work? Thank you again.
@@DanieleTartaglia ma se la volessi realizzare, visto che ho un mare di lettori dvd vecchi....mi potresti mandare la parte eletteonica ??? Se si ti lascio la mia mail twocreativebrothers@gmail.com GRAZIE ANCORA DI TUTTO
This is some serious geekery at work. Created this from just straight scrap parts and a strong mental. I will need to stock up on a few more tools before I embark on this project but it's well worth the adventure. Subscribed!
He opened that drawer with the bolts and nuts, I almost fell out of my chair, who does that. I have covfefe cans filled up with unsorted hardware when I need a bolt I upend one onto the floor and rifle though the pile
Ehh.. The title is inaccurate. DVD drives + A ton of other items. **Btw you've gotta buy a laser seperately** Honestly you could have not even used dvd drives they were that irrelevant to the build. Why not retitle it "How to build a CNC Laser engraver with a screwdriver". It's about as accurate as yours. On a final note, personally the music ruins the video and the editing. The video itself was good, but with a misleading title and a "Like-wall" for releasing the rest of the information, and the poor music choice, it ruins the experience. Good luck on your future projects and remember, without the community you wouldn't have sponsors, so treat them better than this.
Bellissimo progetto, personalmente ritengo la musica troppo rilassante e avrei preferito sentire solo il rumore degli strumenti sotto. Ottimo lavoro come sempre!
quando è troppo forte, quando è troppo rilassante, quando non c'è, quando c'è, quando fa caxxre, quando è troppo alta :-) ahahahaha mi fate morire, non l' azzecco mai :-). Dai che scherzo, a me piaceva dare quel' idea di contrasto tra quiete e rumori di fondo, in modo da sentirli meglio.
@@DanieleTartaglia ahahah ti capisco perfettamente, tant'è che mi aspettavo rispondessi così. Cerca di trovare il tuo stile poi puoi anche un po' fregartene secondo me. Al limite lo vedrò muto, del resto il contenuto è magnifico.
This guy never speaks a word, and builds amazing stuff !!!!! I LOVE IT
You are a professional my friend. I'm happy you got sponsorship, we all benefit from this
Funny to see so many people calling this click bait because they ASSUMED the laser in the DVD drive had anything to do with the project. I wonder if any of you ever built anything in your life. To make the CNC aspect of this with just the mechanical guts of 2 DVD drives, an Arduino, and some scrap aluminum/wood/screws is incredibly impressive. Well done, Daniele!
Craftsmanship is TOP notch! I love the AL finishing piece around the wood. Just goes to show the fine attention to detail. Well done.
i came for the laser but was more impressed with him having a mini table top saw. now i have to buy or make me one.
That thing is just waiting to take a finger off.
Harbor freight sells them for I think $15
9:32: Having your blade height 4-5x the thickness of your work? Lovely way to lose a finger or your ulnar artery...
@@Punkinchunks thats why we have ten, plenty of spares!
I love that project, thanks for sharing! If you mount the bottom plate at the top (the x-axis) you could construct the device in a way that you can place it on any size of sheet to engrave. Due to the fact that I often want to burn a small logo on bigger sheets of wood or plastic I will try to build it that way round. The engraving size stays the same but you can place it on e.g. a table and engrave that with your logo. :D Keep up the good word, Daniele.
D
K/mkko oo pokok isi m
You say: "If you mount the bottom plate at the top." Clarify more about this, please!
@@Dancopymus check out the kkmoon laser engraver in comparison with a small neje engraver on ali express and you will understand what I mean. ;) I mean instead of burning on a bottom plate do not use a bottom plate and leave it open. Therefor you need to turn the construction upside down. Hard to explain but pretty simple to do... do you get what I mean?
@@Dancopymus What he means is he can use this on a large piece of wood to engrave small things on it. So the bottom axis no longer moves as it's attached to the top carraige.
Gran progetto!
Il laser ha una bella precisione, non pensavo così tanto, ottima anche la scelta di riutilizzare i meccanismi dei lettori ottici.. Complimenti :)
This is the most aesthetic electronics channel that I have seen on YT so far.
Sei un grande, ma non solo per le tue capacità e abilità, ma lato umano e intelligenza fanno la loro parte
Ti ringrazio Ivan, la cosa più bella che porta questo lavoro è leggere i vostri commenti, sono molto lusingato, in particolar modo per la tua considerazione sul lato "umanistico" Grazie.
WOW that was an awesome video! Very informative without talking!
You've captured a great deal of information without all the chatter. Many people out here like myself learn from watching. I tend to loose interest when someone is talking about what they're doing instead of doing it.
They will spend 20 talking about it and 10 minutes showing, while you're video wasn't even 20 minutes long!
Incredible !
Veramente una figata, complimenti!!
Piuttosto io proverei a posizionare una ventola che permetta alla superficie da incidere, di raffreddarsi più velocemente al passaggio del laser, in modo da avere delle linee più definite.
Proverei anche a sfruttare come sistema di pilotaggio del laser dei BJT usati come interruttore, che cambierebbero il loro stato più rapidamente rispetto ad un relè, che a parer mio potrebbe non rispondere bene a impulsi molto rapidi tra accensione e spegnimento.
è un' idea per un' upgrade :-)
Complimenti per la precisione e la pulizia con la quale hai fatto questo lavoro!
12:15 - "You don't have to look directly at the laser without special glasses." That's a relief. I'm tired of people telling me what I have to do.
He has to tell it to us, even if we know it. These are elementary security rules. There are still people who don't know it and could look at the laser, burn their eyes and then make Daniele responsible and pay for not having warning us.
Now, nobody can tell he didn't know.
@@jeromegea4746 There's a huge difference between "you should't" and "you don't have to". Just google the meaning ;)
@@johnnybravo2342 i'm French so I write english as i can but I think I understand the difference between the two terms. The best of both seems to be : your shouldn't.
Am i right?
@@jeromegea4746 Correct :) you dont have to just sounds funny here
@@johnnybravo2342 yes, but if you look the laser it won't be funny for a long time 😂
Mis respetos, primer vez que veo un video impecable, con profesionalismo gran ejemplo, un laboratorio de proyectos con pulcritud, un saludo.
E' sempre uno spettacolo vedere come lavori preciso e pulito !!! Grande Daniele, sei il migliore !!! 👍👍👍
Perfect video for a spa. So relaxing.
And here I was thinking he was gonna use the lasers from the disk drives for the actual laser engraving.
ME TOO!
what so i don't need to watch this! Awesome! 😆👊👍🤘👌🖖
Its called clickbait. If you're here, you've already helped the channel.And yes that includes me. Whoops!
yeah I did too.
He could have and should have but he is dumb as hell and thinks that someone, who is going to make this, will not know how to take apart a damn DVD drive
DANIELE, TUS VIDEOS Y TUS PROYECTOS, SON LO MEJOR QUE HE VISTO EN LA RED!!! FELICITACIONES DESDE bUENOS AIRES, PAISANO!!
All i can say is "WOW".. 😱👏👏👏
I'll try to watch this again when I'm not tired, but those fast jump edits are really difficult to follow. I know it's a long process and it's a method shortening it, but I didn't even make it to half way. Nice work, great ideas.
More than 30000 likes but not unlocked yet :-)
This is beyond me but wish I could build one! Kudos to you my friend!
Hi, you should be using a mosfet instead of a relay, the mosfet will last longer and can activate and deactivate faster than the relay, making the lines more sharpen.
Hi, I know, but I'm trying to improve the CNC with the next videos. At home I didn't have a Mosfet, but only a relay module. In the next videos I will update. Thank you for your comment.
I was doing the same project and this guy beat me on time and I used a mosfet, btw I am still waiting the most important part... the laser lol Canada suks to have material you need to wait forever lol
FixDaily - Electronic repairs, hacks and tips A solid state relay would work better .
Yeah, a mosfet for 3d printer heatbeds would be just fine
@@matteorossi5128 Its probably not Canada...Banggood translates as "Takes forever to ship from China".
No me canso de ver sus vídeos, es un placer verlo trabajar y crear, de esa forma tan bonita y pulcra. Muchas gracias, estoy aprendiendo mucho de usted a mis sesenta años.
Audio or detail description, schematic, part file programs would be appreciated. If you really want to motivate others to give it a try. Great concept by the way. Your hard work deserves recognition.
Pretty good! Although I would have added an Emergency Stop button to kill all power in an instant given we're working with a high power laser.
Ottimo progetto! Ricordatevi di mettere sempre gli occhiali protettivi, col laser basta un frazione di secondo per diventare ciechi a vita!
Nota: basta anche un riflesso, non te ne accorgi neanche, e ti ritrovi un buco nella retina, col laser non si scherza.
Bravo, hai fatto bene a scriverlo. Mannaggia a me che mi sono dimenticato di fare un' annuncio ad inizio video sul' importanza di usare gli appositi occhiali.
Magari rivestire la cnc con panelli dello stesso materiale degli occhiali, in modo da aumentare la protezione in generale e in più proteggere anche le altre persone che passano vicino
@@davidedellapasqua2 Bellissima idea. Mi piacerebbe portare alla fiera del' anno prossimo le mie creazioni e mi sono detto, e come faccio con questa? non posso certo farla lavorare con la gente che passa e che si ferma allo stand :-) oppure mettere uno scatolone pieno di occhiali.Ottima soluzione, speriamo si trovino in commercio dei pannelli con le stesse proprietà filtranti degli occhiali. Grazie :-)
@@DanieleTartaglia Di nulla, siamo noi che dobbiamo ringraziarti per i fantastici contenuti che porti sul canale!
Per quanto riguarda i pannelli con queste caratteristiche non me ne intendo molto, ma credo che facendo una buona ricerca non sia difficile a trovarli ;-)
Hey paesano. This project is awesome. I also noticed that, as a good Italian, you speak with your hands, no need to talk or to write captions. Bravo. I'll try to build one myself following your steps. Grazie maestro.
"You don't have to look at the laser without special glasses"
Well I don't have to drink this fifth of vodka, either.
I think what he means to say is you can damage your eyes even if the laser is never pointed directly at them.
"Don't look into the laser with the remaining eye."
Very nice 👌👌👌 project good work 👍👍👍
Who else are very jealous about that miniature saw he used? Anyone ? 🙋♂️🙋♂️
One more thing I want now haha. That would be a perfect addition to my work table.
I really laughed out loud when I saw it. Out of amazement!
es.aliexpress.com/item/4000151332033.html?spm=a2g0o.productlist.0.0.4708156bAFLL6Q&algo_pvid=047ef639-8586-42ed-bc2d-64201cb04abf&algo_expid=047ef639-8586-42ed-bc2d-64201cb04abf-9&btsid=8feefbf5-7547-4aaf-94ad-a5ec78cdeb1f&ws_ab_test=searchweb0_0,searchweb201602_1,searchweb201603_53
@@claudiuadrian11 I was about to post exaczly the same link! :-D
well i would if i didn't have a 10in compound miter saw
i was a little disappointed that you didnt use the lasers that came with the cd drives. but good video.
3:04 Those 4 wires you attached to the ribbon cable end...they just go to the motor where there are 4 big solder spots right? Why didn't you just solder directly to those? 🤔
Tbh it's kinda hard to solder directly to the motor wires, plus if you mess up, then you ruin a motor. If you mess up on the ribbon or connector, you just cut off a piece or get a new connector
do you have the G-code and what app should i use on it ?
Awesome! I will never be able to do this but it motivates you to try! Keep up the good work and best of luck!
Amazing- I may do this one!! Thanks for sharing your rad innovative projects!!
Something very useful and a HUGE time saver: if you have a carbide-tooth blade mounted on your table saw ( fairly common today), it is perfectly fine to use bcutting the soft aluminum components. The angle stock and even the tubing can be cut without suffering any damage or premature wear as it is Much softer than tungsten carbide. (Mohs scale: Al=2.5-3
Tu/Ca =8.5-9) you get the time savings as well as straight consistent results as opposed to hacksaw or other non-fixed methods
Or you could just make a table saw out of an old graphics card, some sunglasses, and three dead squirrels.
What's the third squirrel for??
Incredibile come al solito,visto le tue grandi capacità ho un'idea per te,una specie di stampante 3d con blocco Cnc-autolivello-ditributore pasta saldante per creare pcb faidate,e ovviamente il piatto riscaldato così basta appoggiare i componenti nelle proprie sedi.FIGATA PAZZESCA!!!!! (esistono già ovviamente ma partono da 4.000€ lol.Grazie
Exelente proyecto !!!
una duda y el ELECTRICAL CONNECTION?
Muy buen detalle asumo que deberia tener al menos una salida de 12 volt dc conectada a una fuente de 120 AC.
What a Pro .... ! Everything is so detail ! That's why Italian make Ferrari, Lambo Super Cars ..... !
Like sulla fiducia!Grande Daniele!
Its incredible.. i was randomly watching CNC videos through youtube and this one by the workmanship i notice something extraordinary.. and then when i saw your face at 14:35 i was almost sure you were Italian! at 17:40 i was 100% sure for the "flash di macchina"
Im sorry about my coment but i need to do it! im very fan of Italians for their extraordinary abilities, they are like Japaneses but with European style
Thanks for the well done DIY!
Greatings from Portugal!
For the bed, consider using high density polyethylene (hdpe). Kitchen cutting boards are a good source. You can cut them with wood working tools, but also do things like tap then for bolts.
Hai fatto un video bellissimo, senza tanti fronzoli e che va dritto al punto! grazie per la condivisione!
Hello! By any chance do you have a list of all the parts such as the screws, washers, rubber fittings etc as well as their size or length and how many? Thank you and great video!
Ciao grande sei numero uno ti seguo da senegal grazie infinite ho imparato molti cose da lei top
Grazie amico, mi fa molto piacere 👍
Hello from Poland.
You did a very nice project 👏👏👏👌👌👌. I am respectful. But unfortunately, I have to wait for 30,000 likes to find out more details (like wireling etc.) and about firmware & software. I subscribe your channel, so maybe someday you'll provide all the guidelines (like roughly dimensions, "how to..." etc.) I wish you good luck in your next projects.
Andrew, Poland.
Did you ever get all the wiring details? I would love to see this as well. It's the only thing holding me back from this project.
Hi am from poland too, keep like from mexd He did nice job here but as You mentioned its not enough of essentials and substantial info described in this project which they would be very helpful and useful for most people who really want to achieve smth like this project. So I'd very pleased along with everyone who want it if author of this video would update it with more particular info, even including it only in bottom text. thx
Uno with a ramps shield. You'll find most of the details by searching on arduino ramps and reprap.
It shares a lot of ancestry with some of the earlier 3d printers.
Excellent! Very professional work, awesome created video! Very clean work area, professional tools!
Maybe my unique disappoint was the walking power supply in minute 17:07 ... *lol*
Certo che vederlo fare a te sembra una cazzata 😅🤣🤣 spettacolare
Infatti, è semplicissimo . Ho fatto fatica con la parte Software, ma una volta conosciuto i parametri e con un disegno ben ottimizzato, potete realizzarla tutti.
Sarebbe bello vedere pubblicato l'elenco dei materiali, il software utilizzato ed il firmware.
@@DanieleTartaglia Sei come i compagni che il giorno della verifica dicono che non hanno studiato ed alla fine prendono 10, porco can io ci metterei 3 giorni solo per capire da dove iniziare, senza tenere conto che non ho nemmeno tutti quegli strumenti xD
@@securbyte Basta che guardi nella descrizione del video, ci sono più o meno tutti, per la guida, c'è un traguardo da raggiungere e ci sarà presto :-)
@@danieletartagliafaidate Ciao Daniele, sto iniziando a costruire la tua cnc e aspetto con ansia la tua guida o almeno qualche dritta sulla configurazione software......Grazie
You should become a cuter at the movies! 10 cuts, to cut a screw, is worth a oscar minimum!
Also in comments...more info about camera equipment than to your project!
Grande Daniele, straordinaria attenzione ai dettagli!!
Good idea and Excellent project I like it.👍
Congratulations! Excellent project. I would like to do something like this, do you have any drawings or specs where I may see dimensions of base boards, screws, springs etc.? Thanks
Un bel progetto, complimenti
Very Good !!
what is the end song name?
I wanna see you incorporate a scanner module for a computer so you could scan and format to actual size and then run it through your machine and would burn that basically just plug in from the copier that would be something I’d like to see you bro you do good work. Love your videos keep up the good work.
Keep in mind that lasers are very dangerous, you don’t see the danger in your eyes immediately and damage in your retina is irreversible.
I doubt anyones going to actually do this. But in the event they do...
...I'd let natural selection take its course.
You've inspired me to be neater with my wiring and use more aluminium in my projects. Excellent video.
Hi, Interesting project. Do you have any links to the arduino programming/firmware and connection diagrams?
That was what I wanted to ask
30,000 likes to unlock. See end of video.
It is pretty much a standard RAMPS board...
reprap.org/wiki/RAMPS_1.4
very clean job full thx
30,000 likes are full. Can you display the wiring image and software? Thank you.
He's using BenBox. I had trouble finding a reliable download for it. Any open source GRBL software should do it, but lasergrbl.com/ is specifically for laser engraving.
@@TheFabulousCube thank you sooooo much that really help. Do you have the G-code for it?
Thumbs up for not choosing an overpowering, repetitive electro beat like so many other TH-camrs 👍
Instead of music, this process should have been explained with words
this is just a show off, not a real tutorial.
lost all it's value and made just for revenue.
Yep, useless as an instructional video.. completely worthless.
Becoz its english is not good,he is italian
well judging by the bad grammar from the laser warning, I'd say it's better he didn't use English
@@tgtech2821 How about Italian folks. They don't deserve to hear what he has to say?. I agree... It just show off
This video is full of dedication 🙌👐
This Genius !!! Absolutely Genius ...
Please Dan, Can u show us how to make a cnc plotter like ( AxiDraw ) !!
Thank you & Best of Luck
Very nice and very clean design, excellent.
Grande Daniele, attento a queste riprese perché ho visto diversi sensori bruciati dal riflesso del laser... Potresti giocarti la 6400. Saluti!
Grazie per la dritta, conosco il problema purtroppo, bisogna evitare di fare le immagini dal' alto perchè potrebbe riflettere. Comunque per questo tipo di riprese uso la Canon 6D mk2 per una questione di versatilità. :-)
Piuttosto bisogna stare attenti per se stessi perché si adopera laser di classe IV, classificati come pericolosi per gli occhi e pelle. Inoltre su superfici riflettenti potrebbero causare incendi. Quindi occhio ragazzi!
Great DIY video. I'm going to start working on it. The idea of being able to place it on an object to laser engrave our logo onto our product. I'm having trouble finding the laser unit though. Will a 300mw unit work? Thank you again.
Máquina que eres una máquina joder que celebró que tienes un abrazo muy fuerte desde España en concreto desde jerez
No matter it cannot be considered as DIY but nicely constructed.yiu might have made it bigger with these parts only
Sh*t, I wanna know more about that miniature table saw.
Banggood or Aliexpress i believe i seen it in another video.
It's linked in his description under "power tools" ***raitool t4 mini table saw wood:
Raya Ivy $125.00 for the mini table saw
You can find one similar at harbor freight for $37
Me too bro. Looks like this guy has a bunch of cool shit just laying around... I asked if he would sell it to me but he hasn’t responded...
Fantastico Daniele....non ho parole !!!! Il top !!!
Grazie amico ;-)
@@DanieleTartaglia ma se la volessi realizzare, visto che ho un mare di lettori dvd vecchi....mi potresti mandare la parte eletteonica ??? Se si ti lascio la mia mail twocreativebrothers@gmail.com
GRAZIE ANCORA DI TUTTO
Ovviamente intendevo lo schema elettrico, non i materiali..quindi schema di collegamento, elenco materiali e software di gestione !!!!
That baby table saw! 🤣
99887888
This is some serious geekery at work. Created this from just straight scrap parts and a strong mental. I will need to stock up on a few more tools before I embark on this project but it's well worth the adventure. Subscribed!
che maestro, spettacolare!
Nice you are great Allah bless all your family from Makkah
the best until now, i wanna the guide tutorial, guys please like 30k very fast to unlock guide, congratis excenlent work are you genius.
Progetto fantastico, bravo ciao Daniele
Daniele, could you send me the connection diagram? thank you
ALUCINANTE !! Me encanta tu trabajo y sobretodo el nivel de detalle. Un trabajo fijo y precioso. Felicidades
Non capisco i dislike, non capiscono quanto lavoro c'è sotto.
Ripeto tanto tempo e lavoro.
Avranno i loro motivi 😂
I love high power blue lasers so much
He opened that drawer with the bolts and nuts, I almost fell out of my chair, who does that. I have covfefe cans filled up with unsorted hardware when I need a bolt I upend one onto the floor and rifle though the pile
Thats how perfectionist work. They can't stand on 'pour over the floor and scavenge', lol
I do that too and thought I was a genius for using a magnet to pick them up again. A short lived delusion.
@@indigogolf3051
Short lived delusions are actually pretty cool. When there is no one around to ruin them.
Bro you did a great job..........................
cheaper to buy a proper unit than all the tools to make a small limited use crap cutter
Great robotics engineer.
It's good that you "don't have to" look at the laser directly .. 🤷♂️😉 ..
Ни слова не сказано, но практически всё понятно! Это же прекрасно! И проекты выглядят очень здорово! Так держать!
First thing was an ad for boss laser cutting and etching lasers lol
Nice i really like this video 👍👍👍👍👍👍👍👍👍👍👍
Does someone wants to build this together with me? I might be able to saw the small metal pipe.
Sure, I can open that DVDROM, open and dismantle only
really
you are the best in this field
🤣 two years later 🤣
🤣
He should have use the "TWO YEARS LATER" from spongebob
@@nielsdaemen copyright... If they wanted to get you taken down it might be enough.
Hello from malaysia..
I like you work
Very2 amazing 👍👍😁
Ehh.. The title is inaccurate. DVD drives + A ton of other items. **Btw you've gotta buy a laser seperately**
Honestly you could have not even used dvd drives they were that irrelevant to the build. Why not retitle it "How to build a CNC Laser engraver with a screwdriver". It's about as accurate as yours.
On a final note, personally the music ruins the video and the editing. The video itself was good, but with a misleading title and a "Like-wall" for releasing the rest of the information, and the poor music choice, it ruins the experience.
Good luck on your future projects and remember, without the community you wouldn't have sponsors, so treat them better than this.
Excellent video, no words needed, thank you - SUBSCRIBED!
Więcej reklam się nie dało? (8 reklam + 1 sponsor)
black belt level build here - awesome
16:31 Crying in Jealousy
Bellissimo progetto, personalmente ritengo la musica troppo rilassante e avrei preferito sentire solo il rumore degli strumenti sotto. Ottimo lavoro come sempre!
quando è troppo forte, quando è troppo rilassante, quando non c'è, quando c'è, quando fa caxxre, quando è troppo alta :-) ahahahaha mi fate morire, non l' azzecco mai :-). Dai che scherzo, a me piaceva dare quel' idea di contrasto tra quiete e rumori di fondo, in modo da sentirli meglio.
@@DanieleTartaglia ahahah ti capisco perfettamente, tant'è che mi aspettavo rispondessi così. Cerca di trovare il tuo stile poi puoi anche un po' fregartene secondo me. Al limite lo vedrò muto, del resto il contenuto è magnifico.
I’m 9 years old and made it
Unbelievable ... they are geniuses