How to Replace Fuel Injectors 2008-2020 Dodge Grand Caravan 3.6L

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024
  • Buy Now!
    New Fuel Injector from 1AAuto.com 1aau.to/ib/1AFI...
    This video shows you how to install fuel injectors on your 2008-2020 Dodge Grand Caravan 3.6L. Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
    This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2008 Dodge Grand Caravan
    2009 Dodge Grand Caravan
    2010 Dodge Grand Caravan
    2011 Dodge Grand Caravan
    2012 Dodge Grand Caravan
    2013 Dodge Grand Caravan
    2014 Dodge Grand Caravan
    2015 Dodge Grand Caravan
    2016 Dodge Grand Caravan
    2017 Dodge Grand Caravan
    2018 Dodge Grand Caravan
    2019 Dodge Grand Caravan
    2020 Dodge Grand Caravan
    Tools you will need:
    • Pocket Screwdriver
    • 10mm Wrench 1aau.to/o8P/1AX...
    • 10mm Socket 1aau.to/obyu/1A...
    • 13mm Socket 1aau.to/obVd/1A...
    • 8mm Socket 1aau.to/obyu/1A...
    • Trim Tool Set 1aau.to/oaq4/1A...
    • Needle nose pliers 1aau.to/oHt/1AX...
    • Needle nose pliers 1aau.to/oHt/1AX...
    • T25 Torx Driver
    • T30 Bit
    • Ratchet 1aau.to/obYi/1A...
    • Socket Extensions 1aau.to/obVd/1A...
    • Swivel
    • Torque Wrench 1aau.to/oa2W/1A...
    • Brake Parts Cleaner
    • Cloth Rags 1aau.to/oKv/1AX...
    • Gloves 1aau.to/oaMk/1A...
    • Safety Glasses
    • Pick 1aau.to/oXP/1AX...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 24

  • @TRQ
    @TRQ  8 หลายเดือนก่อน +1

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @distruck58
    @distruck58 4 วันที่ผ่านมา

    Great video! As an average DIY’er, I was able to replace all 6 injectors myself, THANK YOU!

  • @clayharris7814
    @clayharris7814 4 หลายเดือนก่อน +7

    Thank you for this video. The local dealership wanted $1213.00 to change one injector .I asked how much it would cost for all six, and they replied $2300.00. I was truly motivated to do it myself. Thank you for this video.

  • @kjcslim
    @kjcslim 7 หลายเดือนก่อน +1

    First video i have watched that actually shows how to release fuel pressure for this particular vehicle. Very helpful and thanks!

  • @cesarastorga1001
    @cesarastorga1001 22 วันที่ผ่านมา

    TRQ injectors and fuel pump is what I installed in my van, great video

  • @gyularadi3048
    @gyularadi3048 6 หลายเดือนก่อน +3

    Just finished it and can't tell You how much i appreciate Your explanation.
    My van has 176000km, so changed sparkplugs too.
    Only difficulty was the electrical connection to the injector. Couldn't pull it off, so pulled the injector out, than saw that even after the red pin got pulled up, a black tail was still holding on. It was easy to disconnect after. Recommending to change the intake seales too, really cheap.

  • @patrickcrowe5106
    @patrickcrowe5106 2 หลายเดือนก่อน

    Thanks! Cylinder 1 died last Thur. and since I had to pull that one, I just did them all + plugs and coils! Running beautifully again! This tutorial is great!!

  • @MrShannon1966
    @MrShannon1966 หลายเดือนก่อน

    Absolutely great video. Saved my daughter $1000 from the dealership. Thank you very much.

  • @Lioness406
    @Lioness406 6 หลายเดือนก่อน +4

    This video just proves the issue on my 2016 grand caravan. Misfire for cylinder 6.
    I bought the spark plugs all 6 and changed them. Had a mechanic replace the coil and my car still shakes and feels like it’s going to faint. I’m back to the mechanic again for the same code P0306 and checking the fluid injector.
    What can u recommend or give advice to my situation.
    Keep up the videos! 😊

  • @timothytarver9093
    @timothytarver9093 2 หลายเดือนก่อน

    True life saver!! I can do this myself now with this awesome video 🙏 🙏

  • @MC-tn8pm
    @MC-tn8pm 5 หลายเดือนก่อน +1

    Just did spark plugs and a new coil for cylinder 2 on Sunday. Now, tuesday the P-0302 is back. Looks like I'll be doing a new injector next. Thank you for showing how to get that rear bracket off. None of the videos i watched for spark plugs showed where that bolt is. We just had to bend and fight the brackets to get the 4 studs loose. Any tips for getting the black box back onto the throttle body? We got lucky after fighting it for 15 minutes.

  • @moisesmontgomery
    @moisesmontgomery 4 หลายเดือนก่อน

    Which systems correspond with the fuses that were removed. Would like to remove the fuel pressure from a pentastar in a Chrysler 200

  • @gusmo43
    @gusmo43 หลายเดือนก่อน

    Is there a way to know which is bad or how to test it.

  • @billwiebe1579
    @billwiebe1579 3 หลายเดือนก่อน +1

    Brake cleaner is the wrong thing to spray on any o ring from my experience, they expand with that strong corodant

  • @LIVE781REDRUM
    @LIVE781REDRUM 4 วันที่ผ่านมา

    Was that all of them

  • @royquesada5295
    @royquesada5295 2 หลายเดือนก่อน

    Intake holes should be covered as soon as intake comes off and fuelrail area blown clean before removal of injectors.

  • @Chris-hn4sv
    @Chris-hn4sv 2 หลายเดือนก่อน

    Have a 2018 grandcaravan gt stalls when coming to a stop. any ideas what would cause this.only does it on breaking

  • @dustindastrup7266
    @dustindastrup7266 6 หลายเดือนก่อน +2

    Wouldn't it make more sense to just remove the lower intake manifold to do this job and avoid the fuel getting into the v of the engine, as well as give you the opportunity to clean the manifold? As you were cleaning around the injectors, it would seem there's a strong chance of that debris getting into the intake, so I just feel like you're taking far too many risks here.

  • @juliantapia9837
    @juliantapia9837 8 หลายเดือนก่อน

    Thank you 😢

    • @TRQ
      @TRQ  8 หลายเดือนก่อน

      +@juliantapia9837 Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @jesuslongoria4067
    @jesuslongoria4067 หลายเดือนก่อน

    What is the lay out numbers on the injectors ???

  • @bonilla1221
    @bonilla1221 6 หลายเดือนก่อน

    I have a shudder with acceleration and flashing check engine light, I have codes p303, for cylinder 3. I changed coil and plug so far. Would you say that I should start with cylinder 3 if I’m replacing the fuel injector?

  • @MC-tn8pm
    @MC-tn8pm 5 หลายเดือนก่อน +2

    15:45 how about you show how you got the box onto the throttle body instead of editing it out...hardest part of this repair is getting that stupid thing back on. The rest of your video was fantastic but this thing is killer.

  • @LIVE781REDRUM
    @LIVE781REDRUM 4 วันที่ผ่านมา

    Numbers on screen dont match