How to program a Cadillac Escalade remote key fob 2002 - 2006
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- An easy to follow video on how to program a remote key fob for a 2002 - 2006 Cadillac Escalade.
More free keyless entry programming instructions available at www.ProgramYour...
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
THIS PROCEDURE WORKS ON THE FOLLOWING VEHICLES:
2003 - 2007 Buick Rainier
2002 - 2006 Cadillac Escalade
2000 - 2002 Chevy Astro
2002 - 2006 Chevrolet Avalanche
1998 - 2005 Chevrolet Blazer
1999 - 2006 Chevrolet Silverado
2000 - 2006 Chevrolet Suburban
1998 - 2004 Chevrolet S10
2000 - 2006 Chevrolet Tahoe
2002 - 2009 Chevrolet Trailblazer
2002 - 2009 GMC Envoy
2003 - 2008 Isuzu Ascender
1998 - 2004 GMC Jimmy
2000 - 2003 GMC Safari
1999 - 2006 GMC Sierra
1998 - 2004 GMC Sonoma
2000 - 2006 GMC Yukon
2001 - 2006 GMC Yukon XL
2002 - 2006 GMK Yukon Denali
2003 - 2006 Hummer H2
2002 - 2004 Oldsmobile Bravada
Very short, CONCISE, to the point, exact, no filler, THANK YOU.
You're Welcome! Glad it helped
I have a 2002 Escalade. It will not go into Pairing mode. IS there a keyless module for this make?
Easy to follow instructions, worked on the first try.
19 dislikes? must be people who sell remotes in the swap-meets lol
must be!
This was super easy... THANK YOU!
You're welcome!
what if my car doesnt go on programming mode even tho i followed the steps right
Work great thanks 💯 cadillac escalade 2005
Worked on my 2004 Cadillac Escalade EXT . If I add a couple more fobs do I have to reprogram the existing two?
Great! Yes
Just follow this video just did it to my 2002 Escalade and it works easy!! 👍👍👍👍👍
Nice!!
Where did you get your remote I have the same yr
Thank you this was a great help
You're welcome!
Great Video! Thanks!
thanks for watching!
If don't entry to program what can I do ?
Great video 👍
Thanks!
Can I use the passenger door? My unlock button on the driver side don’t work properly
No, it needs to be the drivers door
you can actually use passenger. my driver one was broke also and I used passenger and it worked perfectly
Would this process work for a 2004 Cadillac SRX ?
No - unfortunately there is no manual procedure to program a remote fob for a 2004 SRX
So how would we connect our remote...
@@bluecosmos3618 agreed ^
@@PYR-Auto okay that’s unfortunate to hear, can you maybe guesstimate how to get it in “program mode” ? Thank you
You will need a Dealership or Automotive Locksmith to program the fobs - they will have to hook a computer/programmer up to your vehicle
Thank you!😍
You're welcome!
I can’t find the remote can I still program with a different type of remote?
no - it needs to be the correct one
Will this work for my 02 Escalade only problem is I don’t have the key fob only the key to the truck
Yes, this will work on an 2002 Escalade
Great video thanks man.
You're Welcome!
I order mine, I hope I can do it you made it look so easy.
Thanks my brother 💪🤟✊🏾
You're Welcome!
Will this work for 04 cts?
no
Thank you so much
Your Welcome!
After gping thru steps key fobs only lock and won unlock
Did the 02-06 escalade fob hv a dedicated button to open the glass on lift gate.only ? Or how was opening the glass accomplished?
No - it will need to be done with the button on the vehicle itself
Ok thanks thing is the previous owner has shaved the rear wiper , the button , and the emblem are all gone . So I'm just trying to figure out how that glass portion can be opened without getting into the mechanism.
But how do I unlock hatch back on 2005 Escalade? Help
It should unlock when you unlock all the doors. Press unlock twice on the remote
Perfect!
Thanks!
Will this work on a 2006 Cadillac escalade?
Yes - it should
My second savior
Thank ya sir, salute 🤚
You're Welcome!
Easy instructions w vid
Do you have a guide for a 2000 escalde?
We don't have a video for it yet but you can find the text instructions here www.programyourremote.com/classified/2000-cadillac-escalade-keyless-entry-remote-fob-smart-key-programming-instructions-listing-5099.aspx
@@PYR-Auto This did not work for mine
Good video. I got a brad new fob and i try to do what you say to do and my fob wont respond or connects i can the car to the program mode but the fob wont connect i sat holding the buttoms on the fob for a good 10 minutes and nothing
if the vehicle is going into programming mode but not responding to the fob - there may be an issue with the fob
@PYR-Auto ok perfect thanks for the response I'll take it back and get another
LOL got a 2020 Escalade ad on this
😆 🤣
Didn't work on my 02 Cadillac Escalade 😢
For some reason my remote won't program. When I'm holding the lock and unlock buttons on the remote for a few seconds, I hear a faint sound from the horn and the locks never cycle letting me know the remote is paired....i even held the buttons for as long as 5 minutes🤷😵
If you look at the steps in the description box of the video, do you door locks cycle in step 9? That is what indicates the vehicle is in programming mode
@@PYR-Auto yes it goes into programming mode, just makes a faint noise from the horn when holding the lock/unlock buttons on the remote and nothing else
Although the horn making a faint sound is not common symptom of a bad remote, I would try getting a different one since you are getting vehicle into programming mode and it just is not responding properly to the remote.
@@PYR-Auto ok I'll try that. Both of these remotes are new but they may be defective. Thanks for your help
Good ish thx
Welcome!
I have done it still don't work
Thanks for this video . I’m gonna give it a try
You're Welcome!
This worked awesome. Thanks again
thanks for this video sir 👍🏾👍🏾
You're Welcome!
It worked the first time. But now it wont work
I can only program one remote not multiples
All the remotes you want programmed to the vehicle need to be programmed during the procedure - that includes any that are already programmed. If you look at the steps in the description box of the video, you need to repeat step 10 for every remote after the first remote is programmed.
I only have one, it says “2” on the back will it work? It does nothing, I’ve changed the batteries , nothing works. I have no other one and only one key. Also my only key ONLY opens the drivers door I don’t know if I need to get the whole car re-keyed 😢
@@YellowSuubmarine do the door locks inside the car with the door switches? and yes your key with the number 2 will work
I love you Tomo and Kayla I can get a Lamborghini come on killers
It looks so simple, until I try it...lol
lol As long as the vehicle has the factory remote option and you follow the video you will be fine
This works for bought replacement remotes non gm?
yes - if they are compatible with the OEM remotes FCC ID.