I bought a new door for my brick shed as I wasn't brave enough to take a stab at making one. It arrives tomorrow so I'm really glad this video popped up in my feed. The lock bit is giving me the fear though. Smart move bringing Gypsy out during the sponsor message. I usually jump past those but I didn't here. She's so sweet.
Really nice work, Keith. Would be a good idea to run a bead of exterior sealant along the top of the sill where it meets the door. You should be able to get a brown color... I think DAP makes it.
@@jeffroberts760 I used to live on the Wet Coast of British Columbia so am familiar with rain. It also depends on the prevailing winds but it's difficult to keep anything dry. Standard kit included duct tape, WD40 and sealant.
Good job! I recently modified an old door to fit into one of my door jambs. Though I used jigs for the hinges and mortise lock, which made my life easier because my hand skills are a bit lacking. It's quite a different rewarding feeling hanging a door indeed.
According to a couple of window guys I had around my place who spotted a door I'd refurbed, that fluted glass is rare and worth a bit now. There's a rubber garage threshold strip that SF & TS sell which sticks directly to concrete.
I've been watching your videos Keith the last year and half, I've learnt so much from you and the brilliant habits you have. Just had to leave a comment saying you're a great teacher of woodworking and thanks for the content.
I'd run a bead of caulk along the top of the sill you attached to the bottom of the door. And then, maybe, apply some of the stain over the caulk to hide it and make the sill look almost seamless.
Hi Keith, you want the Exitex MWK20 for under the door. You install the alloy cill, then trim the door 20mm from the bottom of the cill and screw another extrusion onto door bottom. I use a able saw to trim the alloy weather bar part off so you could keep the timber one you've installed. It's the best as there are no seals underfoot. You can set the cill on cement if necessary to make it solid. I use a laser to set screws level then the cill sits on the screws and the cement holds/seals in place
Having the handle that close to the frame impedes the insertion of a jemmy to force the lock, which is good. I have often seen shed doors with lower door handles, no idea why.
Probably lower because they used to have stable doors in them, so when they went to actually put a lock on, they used the same old door, and thus put the lock in the bottom half, and then screwed the 2 halves together forever. Thus the old latch position, to a new door later, and the new door position, even later, was transferred to a newer frame, when the old one rotted away..
Great video Keith. I bet you were frustrated with the door handle, the job almost finished and to find it doesn’t fit - been there ! One thing I would suggest is to run a bead of brown silicone around the top and sides of the door sill to stop water weeping down behind the sill, being trapped and rotting the bottom of your lovely new door. Cheers
Nice work, one thing I'd advise is for you to use Forster bits for fitting door hardware. They produce a much cleaner hole. I use Bosch forstner bits and they are excellent 👍 🔨 🇮🇪
Hey, Keith. The door & lock/handle functions correctly and looks attractive, so all is well. I think that you did an outstanding job. Thanks for sharing these two videos.
Pretty nice work, Keith! 😃 Yeah, fitting a new door in a old frame is never easy. And you got to do what you got to do. BTW, there's a channel which the code they use is "MEOW"! 😂 Stay safe there with your family! 🖖😊
You did a great job. Once I saw a professional door hanger and he used a router with jigs to cut for the locking mechanism and hinges. Super clean install and no tear out. I think on the pinch in would’ve done the same as you did, but the router seemed like a cleaner way to go. Another concern I had was that little groove by the bottom water deflector. I would use exterior silicone (do they make it close to your color choice?) to give a faster path for rainwater to slide off instead of pooling in the little crack as you have it now. Cheers.
Satisfying to see the hinges getting screwed down close up 👌looked good in the end I think. That fluted glass looks like it might be good for a future project. lovely Cat too 🐈
At about 1min in i noticed a milwaukee tressel with a foot operated clamp - tried a search nothing came up - I assume it was milwaukee tressel as i know they sponsor you and it looked the same colours :) do you have a link - didnt see in description
Mandy I thought that at first too, but I think that was his mother in laws door. I think. I have replaced a door outside to a water heater here at my house and there is always something that needs a little work around once you get there. I so enjoy his videos. AND THAT CAT!!! wow what a cutie!
i have rubber seals along my garage doors - Weather Stop - Garage Door Threshold Seals search will bring up loads, although that may require changes to the door now - BUT as you say - water has never got in before , keep the floor level , i'm sure as your parents get older - you dont want small steps / trip hazards , especially in workshop/garden where you are often just popping in quickly to pickup something and not always paying attention, at least thats my excuse.
We have just had to fit 5 interior doors in our house and all of them are of random size , when i say that i mean that whoever built the house must have had each original door custom made for the size as even the doors that are supposed to match are not even close. We fitted some quite heavy chipboard and thick oak vainer doors, fitting doors is a nightmare and the one into the utility / bathroom area was that bad that we had to take the frame out and cut out the brick wall (with new hand made door jam/frames) , the dust in my house now has dust and that dust also has dust. All that means i know how much a pain fitting doors can be , good job K man .
The rail near the center of a door is called the lock-rail and is often centered where the lock is intended to go. So yes your photoshop version is more correct.
I'd already bought the handles. When I arrived I had to go get hinges too and brass were best option. Don't really see why it matters since it is a garage door
Get a storm guard for the floor mate. Screw straight into the floor. (Might have to mess about with the weather mould though).
I love the jumper. You need a "hat and coat stand" one 😉
Nice 👍🏼
Look at the kitty > fast forward through the ad. Well played Keith, well played..
I bought a new door for my brick shed as I wasn't brave enough to take a stab at making one. It arrives tomorrow so I'm really glad this video popped up in my feed. The lock bit is giving me the fear though. Smart move bringing Gypsy out during the sponsor message. I usually jump past those but I didn't here. She's so sweet.
Really nice work, Keith. Would be a good idea to run a bead of exterior sealant along the top of the sill where it meets the door. You should be able to get a brown color... I think DAP makes it.
Cheers Dave
@@RagnBoneBrown My grandfather used to use linseed oil putty for sealing the gap above one of those weather strips
Very smart suggestion Dave
@@jeffroberts760 I used to live on the Wet Coast of British Columbia so am familiar with rain. It also depends on the prevailing winds but it's difficult to keep anything dry. Standard kit included duct tape, WD40 and sealant.
Whoa, wait a minute. Hanging doors & Smoko Time. Am I watching Keith Brown or Scott Brown here 😀
Good job! I recently modified an old door to fit into one of my door jambs. Though I used jigs for the hinges and mortise lock, which made my life easier because my hand skills are a bit lacking. It's quite a different rewarding feeling hanging a door indeed.
Gypsy is a very unique looking cat! So cool!
Good job...how nice to help your parents out.
Rubber garage door threshold would work, or a low profile weatherbar.
Thanks
Good job, Keith! Looking great!
Nice one Keith. Just one thing I'd have put sealer between door and sill to stop rot.
It also looks a little tall, creating a shallow area behind it for water to sit in, but that could be my eyes playing tricks on me.
That is a nice kitty
According to a couple of window guys I had around my place who spotted a door I'd refurbed, that fluted glass is rare and worth a bit now.
There's a rubber garage threshold strip that SF & TS sell which sticks directly to concrete.
I've been watching your videos Keith the last year and half, I've learnt so much from you and the brilliant habits you have. Just had to leave a comment saying you're a great teacher of woodworking and thanks for the content.
Thank you!
Thank you!
I'd run a bead of caulk along the top of the sill you attached to the bottom of the door. And then, maybe, apply some of the stain over the caulk to hide it and make the sill look almost seamless.
Pretty tortoise kitty! And great job on the door!
Fried egg sandwich! Nice! 😋
What an unusual and beautiful cat.
Hi mate I like that u keep the mistakes in and show the solution . That's life lol keep posting ur stuff.
Hi Keith, you want the Exitex MWK20 for under the door. You install the alloy cill, then trim the door 20mm from the bottom of the cill and screw another extrusion onto door bottom. I use a able saw to trim the alloy weather bar part off so you could keep the timber one you've installed. It's the best as there are no seals underfoot. You can set the cill on cement if necessary to make it solid.
I use a laser to set screws level then the cill sits on the screws and the cement holds/seals in place
Thank you
Having the handle that close to the frame impedes the insertion of a jemmy to force the lock, which is good. I have often seen shed doors with lower door handles, no idea why.
Glad there is an up side! 👍
Probably lower because they used to have stable doors in them, so when they went to actually put a lock on, they used the same old door, and thus put the lock in the bottom half, and then screwed the 2 halves together forever. Thus the old latch position, to a new door later, and the new door position, even later, was transferred to a newer frame, when the old one rotted away..
Looks like a top job to me Keith
All that chisel work is impressive
Great video Keith. I bet you were frustrated with the door handle, the job almost finished and to find it doesn’t fit - been there !
One thing I would suggest is to run a bead of brown silicone around the top and sides of the door sill to stop water weeping down behind the sill, being trapped and rotting the bottom of your lovely new door. Cheers
Thank you, will do👍
Nice work, one thing I'd advise is for you to use Forster bits for fitting door hardware. They produce a much cleaner hole. I use Bosch forstner bits and they are excellent 👍 🔨 🇮🇪
You were cold and wet from the the weather? In England?! As we say in Canada " you made a silk purse out of a sow's ear". Well done!
Nice job done there Keith. Looks great and the cat being a spectator was obviously happy with the end results too 😄. Great video mate 👍🏻👍🏻
Nice job, as usual, although the finish is so nice I cringed when you had to mortise out for the hinges.
I feel your rail is placed in the perfect spot. I’ve found low rails tend to allow the door to cup especially when there is large lights installed.
Thanks
Hey, Keith. The door & lock/handle functions correctly and looks attractive, so all is well.
I think that you did an outstanding job. Thanks for sharing these two videos.
Thank you
Pretty nice work, Keith! 😃
Yeah, fitting a new door in a old frame is never easy. And you got to do what you got to do.
BTW, there's a channel which the code they use is "MEOW"! 😂
Stay safe there with your family! 🖖😊
You did a great job. Once I saw a professional door hanger and he used a router with jigs to cut for the locking mechanism and hinges. Super clean install and no tear out. I think on the pinch in would’ve done the same as you did, but the router seemed like a cleaner way to go. Another concern I had was that little groove by the bottom water deflector. I would use exterior silicone (do they make it close to your color choice?) to give a faster path for rainwater to slide off instead of pooling in the little crack as you have it now. Cheers.
I usually do use a router but sometimes it's nice to use hand tools
How to keep me around for a sponsor segment: "here, look at this kitty while I'm talking."
Was just about the say this!!
Are you going to do something fun with the beautiful fluted glass panel from the old door?
Maaaaybe, I'd like to do something with it but I only have so much space to store materials
Satisfying to see the hinges getting screwed down close up 👌looked good in the end I think. That fluted glass looks like it might be good for a future project. lovely Cat too 🐈
Cheers Phil
Gypsy 😍
And once again the cat steals the show. 😹
My favourite part was when your dad made you and egg roll.
At about 1min in i noticed a milwaukee tressel with a foot operated clamp - tried a search nothing came up - I assume it was milwaukee tressel as i know they sponsor you and it looked the same colours :) do you have a link - didnt see in description
Jawzilla it's called. Doesn't seem to be available in the UK for some reason
@@RagnBoneBrown Thanks for the reply, interesting, seems like a good product if doing a lot of doors, windows , etc
Gypsy 😻😻
She's a dreamboat
Hi Keith, nice fit in the end!Am I getting déjà vu here, didn’t you already replace this door, or is this the same video...or am I just going mad?😬
Mandy I thought that at first too, but I think that was his mother in laws door. I think. I have replaced a door outside to a water heater here at my house and there is always something that needs a little work around once you get there. I so enjoy his videos. AND THAT CAT!!! wow what a cutie!
Yeah that was the mother in law's a few months back. I didn't have to make a door that time though! 👍
Good fit Keith your dad's dimensions were spot on. Tony
Coastal: opening in ward 45mm thresholds
Come on Keith, Its a Fried Egg Cob. 😂😂 Considering your own negative points, I bet Mum and Dad are thrilled to bits with the new door.
🤣 not a barm cake?
No, you won't make me watch the whole ad section just because you have a cat on your lap.
*proceeds to watch the whole ad section*
i have rubber seals along my garage doors - Weather Stop - Garage Door Threshold Seals search will bring up loads, although that may require changes to the door now - BUT as you say - water has never got in before , keep the floor level , i'm sure as your parents get older - you dont want small steps / trip hazards , especially in workshop/garden where you are often just popping in quickly to pickup something and not always paying attention, at least thats my excuse.
Thank you
A fried egg roll makes it all worth it!
If you use a forstner bit to start the hole before the auger bit it'll stop the issue of tearout.
All the holes are covered by the hardware
In hind sight do you think it would have been more economical to buy and a upvc door and frame ?
They don't make them this size
You want some sort of storm guard threshold put in howdens sell one I’ve used I can’t remember the brand or just have a google
We have just had to fit 5 interior doors in our house and all of them are of random size , when i say that i mean that whoever built the house must have had each original door custom made for the size as even the doors that are supposed to match are not even close. We fitted some quite heavy chipboard and thick oak vainer doors, fitting doors is a nightmare and the one into the utility / bathroom area was that bad that we had to take the frame out and cut out the brick wall (with new hand made door jam/frames) , the dust in my house now has dust and that dust also has dust.
All that means i know how much a pain fitting doors can be , good job K man .
The glass is called reeded
The rail near the center of a door is called the lock-rail and is often centered where the lock is intended to go. So yes your photoshop version is more correct.
6:46 EVERY. SINGLE. TIME
Exitex make door thresholds. Try Ray Grahams
Thanks
Well done on the door Keith. 😎
I lost my kitty yesterday, Gypsy made me smile. Give some love from me.
I'm so sorry to hear that
Only thing with brass hinges is if there not oiled they will shire off as they are a soft material
I've never seen that happen...
Guess you could use a l profile piece of steel as a floor threshold .
Hence the saying “how are they hanging?”
Can you please answer the question everyone wants to know…
How was the fried egg roll? Did it pass?
It hit the spot on a cold day! 👍
If you've only come here to see Dylan skip to: 2:20, 5:14 & 9:06 to see Gypsy, who's not Dylan.
🤣👍
I've said it before, you should never attempt to hang a door without a fried egg roll at hand.
You heard how Gid is?
Yes, where is Gid???
@@tompenneck1501 I know things ain't been great for him ,but I hope all okay
Yes same here, I hadn't realised. Just not seen any Gid vids for a while. I hope he's alright 🤞
I think he is ok? spoke to him a bit last week. I'll ping him a message and find out!
@@RagnBoneBrown Thanks pal ,Send him our best and hope to see him soon 👍
5:21 I wonder if that’s how he got with his wife lol
This proper made me laugh 🤣🤣 add a couple of OI OI’s in there too
🤣
Where's Dylan?
At home
Algorithm nom nom.
Brass lock and silver handles 🤔
I'd already bought the handles. When I arrived I had to go get hinges too and brass were best option. Don't really see why it matters since it is a garage door
@@RagnBoneBrown yeah, would of looked nice with some black Tudor style Handles Imo