How to Install Vinyl Mounting Block
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Avoid the common mistake of installing an exterior light directly on top of vinyl siding.
Installing a vinyl mounting block on new construction. I’ll complete it with installing the exterior light on the mounting block.
Follow me on social media:
📸 Instagram: www.instagram....
👍 Facebook: www.facebook.c...
12.6" x 8.6" Jumbo Mounting Block at Menards www.menards.co...
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
But what about retrofitting a mounting block for a junction box (for a porch light) already in place on vinyl siding??
If it were mine I would take off a few PCs of siding and install the block then reinstall the siding
It took me about 7 or 8 videos before I found someone actually doing this to code and using an octagon box. Good grief.
This video is so helpful. We had vinyl siding guys do our house, and now our light fixtures are wobbly. When I remove a fixture, they never cut out the center of the vinyl box... the octagon box is hidden beneath and too deep. Now I know what the structure of the vinyl box is so I can pop it out, cut a hole, and hopefully adjust the octagon.
Most homeowners will be installing after the house is sided, if it’s an older home that the siding is more brittle disturbing it less is probably best…would like to see a video focusing on that. Good video though!
Wow, just what I needed to see. I'm installing lights on my garage and you showed exactly what I was looking for. Thank you! Liked and Subscribed.
Perfect, exactly what I was looking for, thank you!
Is it code to mount the box on top of the sheathing? I thought the box is supposed to be recessed inside the wall?
Perfect video, not too long or too short. Straight to the point and it all looks legit (proper junction box). Alot of you tubers giving inaccurate direction to DIYers. I certainly don't know everything and rely on people like you. I've watched 10 videos on this as everyone does it a bit different but this was the most correct IMO based on my newly gain knowledge. Good job.
Best video I've seen to do this. Thank you so much for creating this!
I would tape the top of the box. Nice vid though.
Your accent is unusual, where are you from?
I'm wondering too. I have my suspicions.
By the looks of how he dresses I bet he’s Amish
@@bryangonzalez29 This is also my suspicion, even most country farmboys and cowboys don't have that ability to work (in terms of stamina) and don't have that kind of know-how these days. The video where he puts on that roof single handed in only a short matter of time, even a professional roofer wouldn't have the ability or the wherewithall to do that.
can you provide a link for where you got the mounting block?
Sorry, I should have done that in the beginning.
12.6" x 8.6" Jumbo Mounting Block at Menards
Home Depot would have something very similar
stay away from el cheapo known as menard. home depot and loewes give us retired military MARINES 10% off...menards..NO WAY
You can also take some siding off to match it. Find a building supply that sells your brand, and buy it there. My blocks are all clay colored for example.
Excellent job!
You can’t install the light fixture until after the vinyl siding has been put up.
Also, after he installed it, there was no bulb in it; but at the end of the video, even though he didn't install any bulb, there mysteriously was a bulb inside of the fixture. I just had to re-watch it to make sure. Very many millenials do not know how to install a light bulb, yet in the video it's not shown how the light bulb was screwed into the socket.
The fixture will not work without a light bulb. There will be no light.
Why?
@@thomasvarney723 Because of Bidenomics. If you install the lights, then cover it with the siding, when the light turns on, it will illuminate the inside of the wall instead of the outside. This was proven during the disasterous withdrawal of Afghanistan.
Huh? There's literally no reason you can't install the light first if you're using a mounting J-block like this. The siding goes around the mounting block.
But really, what makes you say that? I had an electrician tell me he also wanted siding up before installing light boxes.
Thanks for the content.
Keep up the good work.
בס'ד
He’s a smart contractor and that’s very rare these days.
the fake concern with level is amusing. one has to eyeball it as we have innate sense of level. amateurs do these fake details