Process of Road Bike Wheels Mass Production / 公路車碳纖維輪組量產 - Taiwan Bike Wheel System Factory
ฝัง
- เผยแพร่เมื่อ 21 ธ.ค. 2023
- Mass production factory for road bike wheel assembly systems!
This is a factory specializing in the mass production of road bicycle wheel assemblies,
manufacturing for brands such as XERO and several others.
The customers span across countries worldwide, and you might have experienced the high quality of this wheel assemblies!"
Hi, there! Welcome to Lemon Films Channel 😆
If you enjoy this video, please leave a like and subscribe to see more delicious foods.😋
Please feel free to leave any comments or questions below. Thank you!
✨Product in This Video✨
Mach 64 Disc Road / 馬赫64公路碟煞
$1,597.51 USD / 49,000 NTD
*Location information*
鑫元鴻實業股份有限公司 (XERO)
www.xerowheel.com/EN/
#wheel #WheelAssembly #BikeWheel #RoadBike #Bicycle #Process #ProcessVideo #factory #MassProduction #輪組 #公路車 #自行車 #台灣工廠
鑫元鴻的輪組以前很超值，很耐用，早期用在捷安特廠車輪組上，我老車上還有一組用到現在。原來鑫元鴻從輪框、鋼絲都自己生產，大部份鋼絲都用協達或是DT，花鼓鑫元鴻也都自家的，不是用昆騰或是喬紳，怎麼一點錢都不留給別人賺 XD。國產就給讚啦！
so much pride in manufacturing, great work.
曲老闆聽著，
我見過的最好的自行車車輪製作，
非常最大和最好的結果,,,👍
Good video, I like since the begining until the final and the keep in details in all the process of manufacturing. Greetings from Peru - Southamerica (march 22, 2024) 🇵🇪😉👍🏻
療癒！讓人目不轉睛默默地看完了~
I think a lot of people have ridden Formula wheels and hubs without ever knowing it. Great company.
These are not Formulas
@@Minwaryit’s says it right at the beginning that it’s the formula company
Most cheap bikes that have unbranded hubs are formula. Never see them otherwise in the higher end, with a cheap rim and a cheap hub I don’t know why they’re 1500.
@@AnotherMrLizardand you can see them applying a layer of carbon onto the al rim… what a scam
@@Jean-jk4zv Better call HED and tell them they're scamming people lol
Beautiful production line, these wheels are made with such care and pride, no wonder they are so expensive.
原來是XERO 以前用過 鋁邊碳刀 不錯 .
OK I promise to no longer complain about the cost of a new set of wheels.
Impressive operation
Impressed by how manual the process is. Especially the carbon wheel.
Hence the justified high price
Fake carbon wheel.
@@metricstormtrooperMy first thought as well.
Those rims did not look like high price ones 😂@robinbantigny8640
鑫元鴻讚
And i thought some of my rides were monotomous. I have a new apprecition on so many levels.
看製造過程會讓人想買，好的碳輪輪一直都是騎車人的夢幻逸品。
Это не карбоновые обода. Это алюминиевые + плёнка.
😎❤️🇹🇼‼️the bicycle kingdom!!!
Champion ! Give the taste to own this bike . Have a nice 2024.
I hope the workers are safe. I see a lot of gloves that can be caught up and pull hands in the machine.
Zobacz sobie ja wyląda produkcja w indiach😢
fantastico video muy bueno. gracias
Good job ❤
😊😮 fantastico lavoro,bravissimi
原來是公路車 看到一半就發現這東西不簡單
當然價格也非常不簡單...
Tremendous amount of hand work is surprising.
Just incredible! Thanks for uploading.
Thank you🥰
這是一個好工廠
Very cool to see. Hubs on my mtb are formula and wouldn't be surprised if so are the wtb rims.
무척 신선하고 도움이 되는 영상입니다.
알루휠 만들다 카본원사가 왜 나오나 했더니 저렇게 만드는구나 갓구운 카본휠 맛있겠다
عجيب جدا. صناعة رائعة فوق الخيال 🌴🌴🌸🌸
와 멋지네요~
如能大量平宜就好，好有興趣租用-一試。😂
Fascinating! It was a good study to make me further appreciate my bikes :)
What amazing technology
That scott time trial bike at the end was beautiful
자덕으로써,좋은경험했습니다.휠생산공정도 손이많이가는군요.
멋지네요 굿~ 👍👍
I saw a very crucial step！
Класс! Производство на высшем уровне 👍
❤❤❤❤❤❤
Excellent work ❤👍🤝
Nice work.....
Thank you for posting this!
Thank you🥰
😊 Vielen Danf fürs Hochladen - bin Maschinenbaumeister und Fahrradfahrer - das Bike gefällt mir sehr. 😊
Thank you🥰
Very good!
👏👏👏👏
産業革命は偉大だ
Xero の １０Sホイール昔使ってました！
認真工作啊，百萬印工要來了😂
wow that's a lot of precision tech
대단하네요 타이완의 자전거 기술력은 역시 세계최고입니다❤
감사해요🥰
職人の経験や勘、その日の気分や天候で出来に差が出るホイールよりもこういう設備が整った工場で量産されるホイールの方を信頼しています
Super ! ❤⭐⭐⭐⭐⭐⭐🌹🙏☀️💐
They are made of aluminium covered with a carbon film, which is why they are cheaper than full carbon.
Thank you. I was wondering why the aluminum rims and then the carbon fiber.
i don't think that's right
Nice
當你在開趴語音控製要喊過你的音響，智能有時候很好用有時候後也會讓你冒煙
훌륭하네요
Saya bekerja di pabrik yang sama
nice
Wow hermosas❤
Yep, specialized places a sticker on, marks it up 100%, and calls it a day.
這樣做法精準不高會誤差
I wonder if the staff at the manual calibration part of the line have a target of a certain number of wheels they have to get through per shift? Since calibration is the final step in manufacturing, I hope the staff I given time to fine tune all the wheels to the correct spoke tensions.
almost certainly, i know when they make frames for pro teams they make sure to use the best most experienced workers in the factory and there's no time constraints but what consumers get is the rushed time crunch version
They definitely don't. Nearly every single brand new wheel requires at least a minimum amount of truing and bearing adjustment before being sold.
evidence?@@itsjustpizza
@@JoehnDoue my fingers, a truing stand, my eyes lol. Formula has been around for many years, but this is pretty standard for (as I said) pretty much all wheels. Next time you're in your LBS probe their brains a little bit. These mass produced wheels especially need checked before they go out the door. Not doing so is an amateur move idc how much they cost.
ok@@itsjustpizza
今では台湾製自転車部品は高級品だからなあ。それでもイタリアやフランス、アメリカ製よりは安いけど。
自分が使っている物も日本メーカーのマレーシア工場製か台湾メーカーばかり（中国製のパチ物は怖くて使えない）
tension testing 是应力释放么？
interesting to see how carbon wheels are actually more of a hassle to make, and how wheels are actually kind of hand-made. I had in my mind a 100% automated process for some reason.
Are they carbon wheels? It looked like a wrap put onto aluminum rims, no? Check 4:29
@@MadChalet I thought it was a mold, never had seen hybrid carbon-aluminum wheels marketed as such before. It could potentially be dangerous if that's the case tbh, because of galvanic corrosion
@@MadChalet How to make a perfect rim with leaves??
Well you need a mold... here in aluminum, which then goes in the oven.
Everything is in pictures... a minimum of reflection
Обода делали одни а на велике уже другие! Фокусы они такие! )))))
見た目はカーボン、中身はアルミ？
Nível superior ❤
46000台幣阿 好貴但厲害
以前曾在做碳纖輪圈的小工廠工作，只能說差好多，自動化機器做出來的速度跟製程，以前工廠做的八成都是手工，根本比不上
Beautyful
Mr Video Editor you need a redo regarding how the mold works in carbon rim manufacturing.
The carbon you see is pre-impregnated with resin and harder. this is stored at low temperatures, so it doesn't cure. The fabric is cut at 45 degrees, and then 2 layers are pressed together (or maybe more). When the layers are put in the mold, a plastic bag is put in, this is used to push the layers against the walls of the mold using air pressure. In the oven, the resin gets cured.
(now you know this, watch again... you can see every step)
I long for the steel italian handmade frames of the seventies
That was a wheely good video.😐
Thank you🥰
@@lemon_films based 🙏
え？アルミリムにカーボンファイバー貼ったなんちゃってカーボンホイールってこと？それでもまぁ工程とても興味深かった！
アルミの型にカーボンテープを貼り窯で焼いて成形しアルミの型を外します。
大陸工廠很多可以好好來學習提升製程
Quality production, patience and care. I knew if couldn't be Mainland China - because there would be spitting, filthy conditions, poor quality, waste and out-of-date machinery.
Obviously this was Taiwan: efficient, civil, skilled, honest, quality.
Two entirely different countries, two different nations.
Интересно
OK 🆗 WELCOME TO BOGOTA DC COLOMBIA
L’Asie usines du monde
❤❤❤❤
мне б такой.
Me encanto, muy buen contenido 👍
Gracias🥰
Hope you pay youre staff well, given that the cost of producing these wheels is very low and the sale of these products is high.
wow this front hubs is the same roval by dt swiss 21 spoke
C’est la fabrication de roues aluminium recouvert de carbone que nous voyons ?
👍👍👍
Nice quiet first half…
Very relaxing
Saludos desde México 😊
Buen video
¡Gracias!🥰
カーボン調のディープリムホイールもフチの部分はアルミなんだね
한국은 자동차 산업으로 전환하며 대만에 자전거산업을 넘겨준 과거가 생각난다...
👍
수작업이 많아야 좋은 자전거가 나오죠...
原來碳纖維輪組也有鋁合金材質喔？
這根本偷料只有貼皮這樣叫碳纖維 偷很大
Nice videos from Taiwan ❤ 10:39 but why standing position? Better to lay down on a recumbent bike. It was forbidden 1934 😣
原來碳纖維輪組的框,還是有個鋁框做基底!
That's the impression I got, as there was no reference to it been removed.
那只是為了貼碳布方便做成型使用，拿進去烤箱時就會拿起來
I think the first aluminum alloy rim and the later carbon rim are different products.
@@zhoujack662 可是製程中還在那個鋁框上雷射蝕刻產品編號，而且影片一開始就是產線上大量製造鋁框，怎麼看都是輪組的一部分
3:40 must be to get all the metal shavings out of the rim.
I am curious.
Was it poor video editing or were those carbon wheels simply carbon sheets bonded to aluminium wheels?
Or was it that an aluminium wheel rim is first produced in order to act.as a template mold and then used as a guide for the carbon layup?
Thanks in advance.
I'm also curious about this... surely its not some kind of alloy/carbon mix as i can't see what the point of that would be
Glad I'm not the only one wondering. For a moment I thought carbon rims are just alloy on the inside, but I can't imagine that...?
It's alloy wheels with carbon surface. This is why those wheels are cheaper than full carbon wheels
it's a poor edit. you can see the aluminium rim being finished and then they cut to a shallow section carbon rim being made in the stainless steel mould. if you don't believe me, why would they first drill and engrave an alloy part that would just be hidden under carbon? it would be an unnecessary step. this isn't what's happening in the video
wait, so 95% of carbon wheel rim is made of aluminium? That's a scam.
they show 3 different rims in the video i believe
9:00 some so called professional dealers charge sky high price to build/tune the wheel. The staffs in the factory build 1000X more but get 1/1000X wage
Ceramicspeed : 8:35; 8:44.
2:34 Typically there is a piece of steel inserted into aluminum rims at the joint.
Not if they are welded. If they are pinned then it is most likely an aluminium plug.