Milwaukee Tool Fastback Comparison Update Plus More!
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2024
- www.homedepot....
www.homedepot....
www.homedepot....
www.tajimatool...
www.opinel-usa...
www.homedepot....
...
/ cfitch13
Autobahn Instagram:
/ autobahn_dan
Autobahn Email:
autobahndan@gmail.com
Autobahn Merch Store:
etsy.me/2RIYUeF
Abolox Tools store 5% code:
autobahn5
aboloxtools.com
Abolox Safety store 10% code:
autobahn10
aboloxsafety.com
Socket Straps 10% code: AUTOBAHN10
www.socketstra...
Capri Tools 10% code: autobahn10 capritools.com
Olsa tools 10% code: Autobahn
olsatools.com
Toolganizer 20% off code:
autobahn
toolganizer.com
Boltster 20% code: autobahn20 boltster.com/
Gripty Mat 10% off code: Autobahn10 www.gripty.com
With ALL tools, ALWAYS follow factory recommended procedures and ALWAYS follow proper safety procedures when using them.
#milwaukeetools #fastback #utilityblades
When I worked as a plumber we put our tools through some serious abuse and some are even treated as disposable because they get beat so badly but those fastbacks could take one hell of a beating to the point where most of our other plumbers carried them just for the durability and convenience, I don't do that anymore but I still keep a fastback around for really demanding work
I love these Milwaukee knives. I have been carrying one as my everyday carry for several years now. I really like the adaptation of the fold-out driver but it only comes with a serrated blade. I prefer the cutting edge to run the full length of the blade. I have never found any use for the serrated edge.
If you cut rope the serrated edge is a must.
A master bladesmith convinced me that serrated blades are made for folks who don’t know how to sharpen properly. A well-made and properly sharpened straight blade will cut through a 1” hemp rope like butter. I have found this to be true, and only buy straight blades for everything.
@@motellion Thank you. I have never had any problem cutting through whatever I needed to.
@@motellioneven with crappy edges I can cut through rope with relative ease. I don’t like partially serrated blades at all
I have the Husky one as a daily edc carry and I love it. It's a very strange shape but it's durable and very practical. If so else fails you can use it as a strike tool is that tough 😂
😂
I have two of the box cutter and bottle opener style. I love it. The hex driver and replacement blade setup make it the best work knife ever. I do buds fleet maintenance, grounds keeping, and small engine all for one company. This knife covers down in all the areas. Plus it actually stays in my pocket.
I'v been carrying the 48-22-1505 for while now and love it ! The first thing I did when I got it was take off the pocket clip.
As much as I’m a dewalt everything kind of guy I must say the Milwaukee fastback is the best
You took the words out of my mouth. I reach for my wife’s fastback mini all the time. Just need to get my own.
Nah, the "Kershaw 1920" destroys all these! And its been out a for few years already.
@@Trump-The-GREATEST maybe but it's just 8cr blade steel. If it was s30v or higher It would be great.
@@Trump-The-GREATEST Kershaw is whack asf .
Dewalt is trash 🗑 now , it once was #1 , but now you got brands like flex and makita who destroy dewalt .
Tajima blades are awesome. You can’t go wrong with fastback, great knifes :)
They improved the bit socket. It’s got a bearing on the one I just bought and it’s a massive improvement on the old one. It’s really snug and safe and smooth. Makes it a useful tool now
Absolutely love that Opinel. I didn't even know they make one like this.
I had a husky one about a year ago. Didn’t have the magnet and kept poking myself when taking it out of my tool belt. Loved it because no one else had one so I never “lost it”. Then I got some dirt between the 2 blades and was never able to open it again lol.
That's the first time I've seen that Victorinox ceramic rod. that looks amazing.
Thanx for the video my Bladed Brother 👍 ⚔️ ✝️ 🇺🇲
those milwaukee fast back knives are good...i use them alot 👍
I bought the kit and they're the best utility knives I've ever had i love being able to use one hand to open my knife when working.
Really didn't get the hype behind these when I first saw them.. until I bought the basic metal model for myself lol. Got the one with the screwdriver attachment not too long after it and it never leaves my pocket. Use it multiple times a day every day. Definitely the best utility knife I've owned. Just wish they were spring assisted - but I can live without it. Gonna be picking up the hawkbill model soon. Great video, dude! 👍
Thanks! Awesome to hear! The New camo Fastback is spring assisted, but it comes with a tanto blade. There’s a regular red version as well!
Binhype at all, youtubers get them free for reviews….aka bribery
@@OfficialFatLip I use one of these and have no complaints. I think they live up to the hype.
@@carlos2071 did you cut anyone’s throat?
@@OfficialFatLip I use them at work, and whenever I’m doing home projects. Other brands tend to be too bulky, or mechanism gets jammed with grime. This one I like that they include pocket clip, and easy to deploy with one hand
I am guessing that for the 2nd one with the full knife blade, if they made the blade free moving and can be opened with a flick of the wrist, it would be illegal to carry or own in certain areas, depending on local laws. So they deliberately make the blade stiff. They get away with the free moving box cutter blade since the blade is so short. The black one at 8:40 may be legal in more areas since your finger is pushing on the blade to open it, unlike one that relies on centrifugal force of a wrist movement.
The silly little clip thing in the hex driver bit lasted about a week. I slipped a 5mm magnet into it and it's been good ever since.
I love that fastback with the bit. It’s in my drywall rig!
What's a "rig"? Any links?
That bit holder lasted for like 3 days for me , then it broke.
Still kept it , since i don't really care about the bit all that much
Love my 1502, 5x blade storage.
That hardline is actually frame lock. Thanks for the great review!
I bought it, kinda like it but the really concern about it is the safety, it can slide your finger tip with skin out so easy if we are not becareful enough when try to flip close. it is not convenience if it is has to be always caution before closing the knife.
the hardline locking system is referred as a frame lock. hopefully that helps.
Wish it had a dedicated looping hole for looping wire. Itd be so helpful changing outlets and switches.
ABD ABD ABD! Nice insight on the fastback knives! Razor storage is king. Thanks and God bless! 😁👍
Yeah! Definitely when you have a mess going on in your shed and can’t find your blades! 😂 cheers man!🍻🍻
Nice vid, thanks. Got a 1505 today. As for the spare blade, mine is loose, held in just by the tab. Meaning, if you turn it over from how you had it and press the tab, the blade falls partially out. Easy to grab and pull out then.
They must’ve changed the design, thanks for the update
I have the 1505. The spare blade will be there when I eventually throw the tool away. Impossible to get out
I would really like them to come out with a fastback that has a part of needle nose on the other side vs the screwdriver. I feel like I'd use them more (although I've already used the screw driver several times and haven't had it long).
the model 48-22-1502 appears to have 2 wire cutters. I use the external wire cutter as a bottle cap opener. It can mar the aluminum a little, but in a pinch (not pun intended).
😂 hey whatever works, works!🍻
Tajima FTW!!!
Here in Asia, for a premium snap-off blade cutter, we have NT Cutter, also Japanese
Thanks for the video on all those cool knives.
Tip: To open knives easier snap your wrist downwards and finish your wrist snap slightly upwards.
Wow. I can’t believe that worked! Just wanted to mention your tip worked so that you can see it went to good use. I’ll tell you I’ve had several flip knives, different fast backs, a few cheaper ones, then I bought the Milwaukee hardline 3.5” -48-22-1999 and in its defense, in a lot of the multitude of awesome reviews it said it’s going to be a tough knife to open for anyone. I have strong hands and have flipped them open so many thousands of times but always with a flip of the wrist outwards. I’ve lubed this one and opened it well over 1000 times now and the damn thing has barely worn to open easier if at all, but no b.s. I just read your tip to flip it with a down wrist flip first and it came open at least twice as easy! Tried it several more times and while it seems counterintuitive it really helps to flip it down first like you said then flip it up/outward! Thanks for the tip👍
Seriously it opens right up now, I’ve had a love hate relationship with this knife but I’m trying to make it work, things just got easier
Sure would be nice if you could get replacement screwdriver bits. Everybody seems to lose them but stores I’ve seen don’t carry them.
My poppop passed and I got bud fast back. It’s such an older model like it’s none of these. It’s bare metal like steel and the red paint has really rubbed off of it but I would not trade it for the world you know. I mean I got another fast back a newer one but that’s just one that I will never let go of and I’ll always cherish because it was once used by my pop-hop quite a bit too since he was a plumber by trade
Oh, sad to hear, that is definitely a keeper!
Wait a minute you missing the first and best fastback The one with the solid steel body didn't have a hook through it but was amazing I so miss mine had I think it was three blade slots on the inside for extra blades
Your review is “The Cuts”. Slicing and dicing the details.
The Tajima ( 25mm ) you show in this video, in Germany it's called Tajima DFC671 25 mm DORA FIN. 👍
Find on Amazon Germay. The color in Gernany ist black / white, and not black / red.
here i use the Tajima 25mm, CB65RB blades.
And i love my Milwaukee Fastback 48-22-1502. I use it with Tajima V-REX blades.👍
Greetings from Germany
Piet
Tajima is my favorite still! I like how the new Knipex Utility knife comes with them!
@@AutobahnDan The Knipex Utility knife is an original Tajima, only the color is changed to black / red.
Piet from Germany
One thing that I don’t see with these newer knives is that they don’t lock on a 45 degree angle but the original fast back does. That’s the only reason I won’t upgrade
On my first knife I used the ¼ to unscrew the little bolt 🔩 and it mess it up that little wire that holds the bit and it's stops holding it up so I tried to fix it but it didn't work and then I went to store and they replaced it for new one because it have life time warranty. The bit is fully corroded.
I think there is a wave feature on knife 2. The thought is that is grips the edge of your pocket and deploys the blade on the draw
I've used my Fastbacks for about 10 years every day . They look a bit different from the actual ones. Fully metal, more ergonomical and the color is a bit darker.
If you use a higher quality blade, Like the Irwin, which is thicker, you probably won't be able to squeeze two into the slot, but as those are hardier blades to begin with, one spare should be fine to get you through a day or two of heavy use.
Best tool I've ever carried was the 48-22-1906 knife and its predecessor from when I worked in automotive. Used it as a knife, pry tool, smasher, self defense (don't ask), and EDC before I ever knew what EDC was. Carried about ten of them over five years. Two of which were stolen from idiots that couldn't be trusted with a knife, one I purchased myself and it was stolen by a temp, got one purchased for me by as an apology. Solid, solid tool. Used Stanley blades in them exclusively.
As for the bit detent they could have went the detent ball method much like the Klein 11 in 1 screw driver
Just bought a milwaukee hawkbill knife, I love it so far, however they really need to make the release larger. Too hard to close the knife with the small release, especially when wearing gloves
Literally bought all the fastbacks 2 days ago and the camo one too. 😂
Love the Fastback the lock on the Hardline is called a Frame lock btw
5:11 it may be that the button isn't being pushed in fully when trying to flip it open. The height of the button is different on the different models, and if you have large squishy thumbs, it may not be fully releasing.
Push it in all the way and see if gravity makes it swing freely on its pivot. If it does, lubing isn't needed, just use the tip of your finger to push in all the way.
Negative, I ended up lubing it and it works fine now..
Wow that opinel knife that holds the bits is awesome. I just looked at their website and they’re all sold out. 🥺
Amazon shows stock!👍👍
@@AutobahnDan really I’ll check
That Husky looks like a trip to the clinic waiting to happen.
😂😂😂
6:32 That Opinel is pretty sweet. I like that blade shape.
Just opened a beer bottle with the cutting void (where the string cutter is) on the handle on the 1502 model. Not as good as a bottle opener but does the job!
🍻🍻
I’m guessing you would love the knife scene. Check out some zero tolerance knives.
Also do you know how knives work and how the blades lock? Then what confused you about the grinded spot on the screwdriver end.
WHY, would you need the Bottle Opener to work on both sides ???
I made an attempt to watch the whole video was very informative I love the fact that you also introduce different brands of knife which is totally awesome I love the French one quick question for the time sake which life of the Milwaukee’s would you say is the best of the best I know they all can be used for different things but if you could only own one which one would it be?….
I’ve been gravitating towards the compact utility one a lot lately. It’s definitely a good size!
Cool, but who's Victor Enix?
My compact one has serious blade play that won’t come out. The larger one has been fine.
I have 4 of their lock back knifes,had to resharpen the edge on all of them to get them to razor edge
10:11 Yesterday I paid $15 at HD for the 1502 alone so if you got both for $20 that was a steal
Yeah, gotta keep an eye out on the “special by of the day” sales in the menu section on the Home Depot website! There’s some fast backs in there today only!
Best utility knife in the world.
The lighting is fine
I've looked everywhere.. and you seem like the guy to ask.. but years ago, prob around 2013, I could have sworn I had a milwaukee utility knife (like these fastbacks) that was spring assisted. One button push and it flicked out by itself. Did that exist or am I nuts?
From memory, it may have even had a blade storage. No screwdriver and No bottle opener. Just a plan Jane utility knife. Traditional red and I cant remember if it was metal or plastic.
Actually it was metal.. amd it also had a silver belt clip.. not the new black ones.
I just wanna know if a spring assisted one ever existed and if so, the model number please?
I took the screwdriver bit out and put a mini pencil in the bit holder.
Get yourself some 10 weight nano oil! It works wonders for all knives. Been using it for years.
Also the pivot screws, looks like you have to have a bit on both sides at the same time to tighten or loosen
If you don’t like the silver grind marks on the screwdriver, just use a black sharpie. Quick easy fix.
hi im from the phililipines and i was just wondering if how can i order?
Sorry unfortunately I do not know the market over there.
Disculpa me podrías decir que modelo es la navaja Husky que tiene destapador por favor o en donde conseguirla
The hardline is a frame lock and the screw is an over travel stop.
Where did you buy your 1505? The only thing I don’t like on mine is that I can’t reverse the belt clip. Yours is the only one I’ve ever seen that has the recess to reverse the clip.
Hmm, strange.. I just checked the Milwaukee website and it looks like they updated it. I got mine from the homedepot site when they first came out. Might want to stop by an ace hardware, they seem to have old stock a lot.
The Kershaw #1920 beats all these and been using it for years since it came out. Perfect for warehouse workers and so useful and well made! Inflation has rocket it's price from being less than $15 to over $20 now!
You sound normal on 1.5 speed xD Nice video!
Is the part of the blade holder where you can stick the measuring tape, made of metal or plastic?
Yeah, the textured side is made of aluminum, and the glossy plate on the other side steel.
The size of the Tajima 25mm knife makes it inconvenient to carry in a pocket and will take up a lot of space in the toolbox or the tool belt.
The "OLFA OL" can be an alternative as it also has an extended blade channel which allows the blade to be safely extended by 3 segments and the 18mm blade is also easier to find in local stores at a lower price.
Yeah, at the shed I have a preference of leaving it on the benches, so the larger it is, the less it gets lost😅
I love that 2nd one 😁
I have the 1505, great knife and let me tell ya I abuse the piss out of it, I'm a commercial roofer so it gets used everyday, bit still works great and it and the knife opens fine
Donde se consigue y cuánto es su valor???
So.... you need the "needle nose" fastback knife to use the "spare" blade on the "utility"" knife fastback !
I know people will moan about you reviewing the French knifes midway but that oak corkscrew one blew my mind. I literally just paused and ordered one midway.
The lighting and quality was perfect, don't mind the snowflake virgins in the comments. Great review, indepth and very informative.
Thanks
Thanks! I think that was when the shed was still a mess under construction. Awesome knives from Opinel! You will definitely enjoy them!
Awesome video
Thank you
Happy New Year
Do you know the part number for the Phillips tip for the fast back
I tried searching and can’t find nothing.. there is a Wiha double-sided bit with a little divot in the middle, but that doesn’t work.. I think your best bet is to glue in a magnet and use a one-sided bit..
Use a T6 torques for the blade
Wats the metal piece at the end of the 1500 for? Was kinda wondering wats its for if anything.
Tether hole
How much was the hardline 48_22-1994
Oh you just missed that one! It was $34 on the special buy the day at Home Depot a few days ago! It’s back up to $76 again!
that lube simply is treadmill silicon oil ;)
Your hands look soft. What kind of hand cream do u use?
Gloves at work to keep the chemicals off!😅
Weird, bro
It puts the lotion in the basket
they need one model with glass breaker, seatbelt cutter and screwdriver all in 1
Toi muon mua mot con lien he the nao ban
Utility knives with a built in bottle opener are great gifts for the functioning alcoholic :-p
There’s many other drinks that require a bottle openers…
I guess that is a framelock on a Hardline.
😡😡😡 I haven’t finished watching this and I’m fuming! You showed me how to change out the blades on these things! I’ve been struggling to unscrew the plate that holds the blade in place, to change it out. 3:30 into the video and I’m HOT! (At myself obviously) WOW!
The 3rd is the best
Tôi muốn mua 1 chiếc thì mua như nào
Does the bit holder have a magnet for using regular bits? or they held by that crappy springy ring as well?
No magnet. Regular bits with a divot for the ring get pushed to the back which is quite annoying, but it looks like you can glue in a small magnet to take the slack.
Nice video!
Kobalt fast flip is much smoother than the Milwaukee
Blessed is he who is brief. 20 minutes for 4 utility knives?
one of the stupid invenstions when you already have a solid piece of metal, it is the bottle oppener. so much space lost or weight added useless.
$10 for two?? These knifes retail at about 20-30 euros each. That's about 30-40 dollars each! We are getting ripped big time on gear here. So sad and to think carpenters get payed way more in American and rent is way cheaper haha I need to move to texas.
Yeah, a lot more competition over here..
Great video brother!!! You have a new subscriber!!! LOL All the best Dan!!
🔥👏👏 thanks!
Dope knife but it ain’t a Lenox
i think the 1502 is the best of all & it's always on my pocket
The 1st and the 3rd are my favorite
Lever lock?? Liner lock
I don’t know which one you are referring to, but if it doesn’t have a button, it’s a liner lock
Dónde la puedo conseguir
@@joseluisaguilarrodriguez7621 Home Depot, Amazon, eBay, Ace Hardware..