Are Boneyard Airsoft Builds Bull***t?
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2021
- Boneyard sales on retailers websites are normally a joke - why wouldn't you want a totally fucked Specna M249 for £30 off of the retail value?
But it's possible to make something wicked for very little if you try hard enough - just don't pay a tech to do it.... there's a reason the shop didn't want to work on it... - ตลก
These are the most Khyber Pass looking AKs and I am all about em. Awesome work as usual!
Let's do this. My exams can wait.
that's the attitude that sent me to a Stan Ridgeway gig in London 2 days before my final exams when I was behind in my revision. Never did me any harm!!
Just saw this while im meant to be revising
@@mppewpew no problem man I passed all exams even was the second best graduate that year lmao. Best of wishes for you
Thanks again for doing such an amazing job on my AK74, it has turned out so amazing and looks so much better than I could have expected and the drum is awesome 😁
Reminds me of the time I tried to mate a dboys steel akms front end to an older pot metal dboys aks-74 receiver in a poor attempt to make a "Khyber Pass" kalash. Did not end well for me but it was a lesson.
Do not really have enough bits of anything to build the dream abominations I have (The Khyber Pass Special, an ak105 with a solid stock for either wood or plum furniture, either another carbine or full length kalash with rpk buttstock) and like you stated repeatedly throughout the vid, it would cost far too much to do so. Not many shops sell ak externals without making one have to buy every single bit individually. Most often it is just pot metal parts or only tm style (which admittedly makes TM style probably the easier path for builds).
LCT have teased builds before for their whole "modular" campaign before, and respond with "contact your dealer" when told "can you make receivers and complete barrel assemblies available?" knowing that no shop is going to carry them all and at best for the latter will just have the outer barrel sans gas tube assembly, rear sight block, etc.
At the point where I rather just have externals to throw my shit v3 gearbox builds into rather than paying out the nose for whatever "new" model that comes along. Problem is the externals end up costing near the price of a cyma at some points (though even now cymas feel like they are going the lct route of price increase).
Sorry for the rant, been one of those weeks.
2:51 I'm wearing one of three sleeveless shirts my wife got me as a birthday gift from A2 supplies back when they were in central reading, they're a nice bunch. I'm a little envious, I wish I'd asked if they had any beaters they didn't mind parting with, it would've made an alright display piece with some spares and TLC.
The long ak was my favorite! I want one haha. The reason boneyard shit is so fun is because if you are creative, it gives you an excuse to make dumb shit for fun while not destroying something that works.
I love when you do powder burn effect, I am endlessly fascinated with my AKS74U flash hider after you did that.
Boneyard guns are good if you want a project gun. But if you don't or can't make the time for it, then it's a waste of money. I have done 1 boneyard m4 pre-owned dirt cheap. They were honest and told me the gearbox was not functional. I got a replacement gearbox and got it working again. It's externally a g&p. Internally, it has a g&g gearbox now. No modifications were needed to fix it in the G&P body. But the only original parts from the boneyard gun are the original outer barrel and handguard.
But this project took over 4 years to make it the way I wanted it externally . But since I started with a base, that was how I wanted to be it made it easy to swap with better quality externals because I started it with a boneyard gun which had it a way I wanted it to look like. I am over the moon with it, and it is my favorite AEG I own. But will I do it again? That's a maybe if I find another that convinces me to do it, but at this time, right now, I won't be.
I'll be honest, these look like they came out of Khyber Pass. And I love that
This is a seriously underrated comment
I would love a tubak dmr. Looks like you have all you need if that was you thing. Keep up the good videos. Learned tons from you. I have send your “Y is my gun broken” video to loads of friends thats new to the game. Thanks!!
Love it. Wish I’d got into Airsoft younger. Would love a collection of parts. 👍. Could watch you show your guns for ages.
16:33 fuck me that's better looking than CSGO's own Green Laminate AK
Today on Negative Airsoft: Luke rants about yet another piece of crap a customer brought in to leave stains on famous tech's hands
BTW Luke, if you want one of those russian AK rotor hop-up chambers, I can help, they are 50$ a piece
Nah, too much for a hop unit that needs a new nozzle.... I made TDC kits for a tenner. Problem solved.
Thank you for the offer though!
such sweet work, and that black and yellow is beautiful.
the noise of the valmet from commando has to be my top movie gun noise of all time.
the green AK is balls deep i love it
My first AK was put together from old trashed rental AKs and it still works.
Bum sausage
Love the spooky music. It fits
It’s probably going to be summed up as, depends on the gun, how far it’s gone, and is it actually worth fixing it, if it’s a non standard like a ppsh for instance is it possible to find proprietary parts,
Or I’m most likely completely wrong XD
Recently got a boneyard VFC FNX45 for £65. Just had to use a bit of wet and dry paper to sand some burs out of the BBU and actually give it some lube and it works great now.
I'm not a massive ak fan but you may have started to sway me that way after watching this. Well done 👏 👍
Those look awesome! Wish I had a parts bin good enough to kitbash an AK!
Christ, haven't seen that many AKs since the market in Islamabad! Love the long AK/RPK thing. Now I want one.
Getting some Khyber Pass vibes from some of these. Love it.
Picked up my vfc cqbr from pb sub 200 at the time , because it came with no mag ,have 40 + mags here already , it's not s bad little gun for a 3rd in line back up
Forums are great for deals, I got a CA m15a4 CQB seal for £90 shipped. New piston, motor and a mosfet and it's even better than it was new, less than half RRP.
All my guns when I started out have been from boneyards and I fixed them up for some cheap airsofting. some didn't need anything others i've spent more than what it cost new. Swings and roundabouts
Man, I've wanted an SVD (Or similar styled DMR) since 2001. Eventually got a WE Acevd and whilst it was lovely to shoot in terms of feedback and tactility, it didn't actually shoot very well......
Still searching.
(That RPK/Valmet/Magpull thing is AWESOME).
The CYMA and Echo1 draguns are pretty good. Ive used both.
@@TheClone37 Is (as I've heard) the Cyma a copy of the RS?
It does seem to be a good platform, and most importantly if it is a copy, then it retains the wonderful RS hop unit which really is at the heart of the performance.
Cheers :)
You should see My Nova Cobra 9mm Conversion build. The same one used by Van Damme used in Desperado.
First answer, not go me because if they're mostly there or if it's loads of different broken guns for like $40-50 each gun I'm happy because I can turn around and make $400-500 because each gun will be about $150-200 per if they're good brands or work well at little cost
Problem is nobody sells boneyard like that anymore when. You account for 3 hours work and parts on a 300 quid boneyard gun tht retails for 450 new it's not worth it
@@jediknight1294 I also put parts that make the gun more worth it in the long run
@@StorMRagE4EVA downside is its not easy to justify that to people. Selli g custom builds you barely get cost of parts back never mind covering your time.
Iv done a few to keep my hand in and clear out parts boxes but if I had to actually pay myself for the time you couldn't do it
Hoping for an update on the egg sandwich xD
I picked it up.
I’ve watched approximately 18 seconds of the video so far… but from my experience it’s genuinely a mixed bag of fuckery!! I’ve gotten an APS boneyard gun that was $20 and was so far gone using it as a paperweight wasn’t even within question because of the amount of dirt, dust, bark, grass, grease and other shit that would continuously leak out of it like some sort of radioactive sludge, but I’ve also gotten an ares amoeba CCR ( the little chodely one) with a retro arms gearbox shell for $90…. Retro shell, $120… amoeba body….. $-30.. yeah I guess I payed about what that was worth but you get the point! no regrets there!!! If you’re bored they’re fantastic, but absolutely don’t plan on making a boneyard your primary rifle unless you enjoy heartbreak and swearing at a toy
11:30 Holy fuck. That's Army of Two level of crazy. I love a modern take on an AK, that looks the shit mate!
And then you outdo it with the one after.
Outfuckingstanding
Can you do a boneyard famas? An extra long barrel? Or try to retrofit m4 magazine well?
It's already a cool gun but I think it'll be a real challenge and I know you could pull it off
The green ak suits your logo!! I would run it and I don’t like how they look
what do you think about zenitco parts on ak's.
i have 2 sets and i love them
Please Negative Airsoft can you put tracklisting you used. Songs you use are absolutely lovely.
Are the laws regarding orange tips the same in the UK as they are in the US? I think they vary from state to state, but in California they don't mess around.
I saw that ‘74 on PB myself and was sorely tempted - would’ve pounced if I was UKARA’d. Glad to know it’s been put to good use, as jealous as I am…
I think I got my damn UKARA just after he bought the thing
It wasn't bought from PB originally and he bought it from me.
Well the only reason I can see for buying a Boneyard gun is if you wanted chasis for your p* or whatever. As long as the gearbox shell and externals are mostly intact you could probably make it work. I even saw an aks74u where it was fullybfunctional as a boneyard gun but the hinge for the dust cover broke and the guy i was watching prefered it that way like every other ak.
that first AK looks really cool.
I remember seeing patrol base selling an A&K M249 para heavyweight with a whole load of wear and tear, a wobbly stock, I think the charging handle was buggered?? And the hop rubber, or something to do with the hop was trashed. I think that was about £350-£370, while the brand new one was about £450.
There was/is an AK on Patrol Base’s boneyard because the stock has been sheared off somehow (stocks metal so no clue how that happened)
@@arch_2076 there's an M12 smg on one site that is brand new and yet the metal stock has been sheared off entirely, I wanna know how on earth that happened - I jokingly mentioned it to the owner of an airsoft shop near me and he said passively 'it might have been dropped'...how poorly made could it possibly be?
@@arch_2076probably by the window licking retards they have working there monged it
My favourite vid so far. That's one of the things I love about airsoft, you get to build stuff out of crap and learn about the internals at the same time. If the svd stocks are for sale can you send me a link pls
They're not, which is why I had to buy a whole gun lmao
@@NegativeAirsoftTech you done a beautiful job. I salute you sir
@@Judge_Mentalbuy a set of us ak import furniture cheap is the easiest way.
Talk about custom AKs man your builds looks awsome i love commando inspired rpk👍
Im not a fan of AKs.....BUT THAT COMMANDO INSPIRED ONE?! 🔥🔥🔥🔥🔥
why is ak2m4 so low on stock? seem to have been for quite some time now
paying a latte for bits from A2 supplies is a time honoured tradition XD
(Haven't paid yet...)
Its like "Wheeler Dealers - Trading Up" - but for airsoft
Lovely work as usual, there wasn’t a build I didn’t like.
one day i will have a stock pile of shit like this lol and do the same, cant wait to see what you make
Something about the AK's suits the boneyard look. They look stupid when brand new.
Reminds me when I started a new job, I got boots issued. The first thing my boss told me to do was to go outside and scuff them up so I didn't look like such a noob.
I have to point out though that you released the AK green laminate 2 DAYS before Valve released the skin for CSGO :) Are you some sort of airsoft god?
yes
Man, I'd totally get that mongrel RPK in a heart beat,,,
Would you ever come to play airsoft in the states?
This will be rather awesome
The green stained AK is a beaut🤤🤤😍😍
Not if you have limited parts.
Where do I find your website where I can buy some stuff from you?
Yea
If you have a CYMA AK 74 wood kit you'd be willing to sell I'd be very interested.
Boneyards are just junkyards for airsoft, except you have to buy the entire gun if it has a part you want
Well Luke the first and last ones i think are the best that worn look makea them sing
Love the accent..very convincing.
This is the shit i love bro ....keep up the creativity! Fuckin brillant! Maybe next time you can m4 boneyard shit? Thanks for the free entertainment.
help i can't close my l85 ETU it's been nearly 3 h and it won't move reached a certain point
Welcome to G&G
@@NegativeAirsoftTech i figured something out ...
i destroyed something inside that was blocking it from going back together by slamming it into the ground and i filed the side that wasn't fitting in the metal gutter now it works even if it i broke some pieces . G&G it's fine it's me that has monkey brain UGA buga
Love this gun.
Name the green one "Peter Steele"
Nice 👍
Let's go
You have a web page?
yup
If csgo had a green laminate
well im fucked, another 4 hours
saint patric ak?
wooow you are the only person i have heard in the 42 years alive moan about the american croak voice that every fkn yank does, my wife knows but it doesn't bother her so it must be my adhd or auty making me pin to that shit like a fly to a bad smell, it gets under my skin lmao atleast now i know I'm not the only one! rifles look sick btw well done
Two hours in & no thumbs downs!
Fuck!
I wanna buy gun from you the 74u
I miss skylar’s airsoft videos…
Noice
so what was the decision to add horror game main menu music in the background of the video what made you hear it and go yup this will go great with my monologue
Depends on my mood
@@NegativeAirsoftTech what was your mood
You're like a fucking Khyber Pass mate :D
Why is it everything you touch turns into something sexy...
Sex?
@@NegativeAirsoftTech giggiddy
Hey Im from 🇵🇹 😤
And dont even feel ofended 👆(midle finger emoji)
Lol
What’s your web site address please
You'll never believe this....
Negativeairsoft.com
😃😄😁😆😅 5 Smiles.
No need for the language
Which language?