Don’t you have a motorized 3 wheel tricycle? I can’t find the video I know I saw a while back where you was talking about the beefier rear sprocket and one way bearing if I’m not mistaken. Please post a link to that video and thank you in advance!!!
@@BuildBreakFix okay I must be mistaken for someone else’s video. I remember the guy saying it was his wife’s I think. Thank you for clearing that up though and thank you for the content you provide us.
Does the carburetor on a regular gas bike build necessarily have to be have the float bowl parallel to the ground or flat level? 🎚️ Or can it be slightly tips and upward or downward
@@BuildBreakFix liked your warning at the start to be honest even the small engines are dangerous . there fun but still dangerous . to be honest im kinda shocked no one has been hurt yet .
Another excellent video, thank you. Question (s) : the bikes you use...26" wheels? I have an old Murray bike from 1967, heavy steel frame with 26" wheels and a 36 tooth gear. I'm looking for a 29" wheeled bike for my next project. Would a 41 tooth sprocket be a better choice for that size bike?
It pulls me on a 28t up to 47mph. I'm 6' 2" and 250. Gotta be close to 5 hp. Nothing smaller can come close to that. It is just high compression ms460 pretty much
Yes. They sell out fast. Everyone is buying them up so keep an eye 👀 out for them! 199.99 + 20$ s&h. Amazing kit worth every penny. Yes it will fit a Cranbrook. But I suggest you upgrade brakes and such. This thing is fast.
What is number for b6hs spark plug everyone says to 80cc I found 4 different one b6hs-10 1052,b6hs 7534 yellow box and new white and black box 7534,and b6hs 4510
Love the Avenger. I don’t think it has the torque of a 110 but it’s a lot faster. Build quality is very good. Had t wash out bottom end. 7 times before assembly. All in all a great motor. I bet they come out with iron sleeve next year
Nice 😃 One question for a china doll with minarelli 70cc 47mm and a pwk 22 which pilot jet and main jet we should start ? I mean basically with ports cleaned
@BuildBreakFix I'm not talking about hill climbing here I'm just talking about regular riding with regular little hills. I have a 28 tooth but I never put it on because I didn't think I would like it but where I live a 32 tooth is fine so I might give it a try
Really not bad for out of the box power. The only thing I didn't like about it was the ring gap in the intake port but apparently that isn't an issue? lol let us know sure you will be making even more power soon!
0:23 best advice ever !!
😅 true though! People toss it on a Walmart bike with pedal brakes. They find out really quickly it was a bad life choice the hard way.
Don’t you have a motorized 3 wheel tricycle? I can’t find the video I know I saw a while back where you was talking about the beefier rear sprocket and one way bearing if I’m not mistaken. Please post a link to that video and thank you in advance!!!
Never made a trike!
@@BuildBreakFix okay I must be mistaken for someone else’s video. I remember the guy saying it was his wife’s I think. Thank you for clearing that up though and thank you for the content you provide us.
Does the carburetor on a regular gas bike build necessarily have to be have the float bowl parallel to the ground or flat level? 🎚️ Or can it be slightly tips and upward or downward
Nice night ride man 👍👍
Thanks! That avenger is crazy fast.
Nice night ride along brother ride safe
That avenger 85 is crazy for its price.
cool . nice ride buddy .
New avenger is an animal 😆 I can't even build a saw build for as cheap as they cost.
@@BuildBreakFix liked your warning at the start to be honest even the small engines are dangerous . there fun but still dangerous . to be honest im kinda shocked no one has been hurt yet .
Lots of people are breaking legs, hips arms lol one hit a car. Even that Kevin's shop guy broke a hip now
'It's a bird...No,It's a plane...No...It's that nut on another bike...' ;)
thats me i'm a nut case
😆
@@BuildBreakFix watch my video test driving mine avenger 85
What light are you using do you have link to where you got it?
Was about the setup. Link long expired. th-cam.com/video/T7sx6xEK5sA/w-d-xo.html
Another excellent video, thank you. Question (s) : the bikes you use...26" wheels? I have an old Murray bike from 1967, heavy steel frame with 26" wheels and a 36 tooth gear. I'm looking for a 29" wheeled bike for my next project. Would a 41 tooth sprocket be a better choice for that size bike?
38t is your best friend! Best of speed without murder to the engine to get going
@@BuildBreakFix Great, thank you.
So more than 5hp?
Less HP than a phantom85 but definitely better built overall
@djbanton-bikes it's the same cylinder just higher compression in two parts. It's a chopped head ms460 pretty much
It pulls me on a 28t up to 47mph. I'm 6' 2" and 250. Gotta be close to 5 hp. Nothing smaller can come close to that. It is just high compression ms460 pretty much
Good to know, my ms460 is built and sitting waiting to get some free time to install and test, loving the avenger though
I've only run my avenger 3 times, I'm using a 32T on 26 and runs pretty good for a new motor..... it could be my new favorite
So to find this kit i just have to look up avenger 85 on ebay? Im imagine this kit would not be a good match with a huffy Cranbrook
Yes. They sell out fast. Everyone is buying them up so keep an eye 👀 out for them! 199.99 + 20$ s&h. Amazing kit worth every penny. Yes it will fit a Cranbrook. But I suggest you upgrade brakes and such. This thing is fast.
What is number for b6hs spark plug everyone says to 80cc I found 4 different one b6hs-10 1052,b6hs 7534 yellow box and new white and black box 7534,and b6hs 4510
B8hs-10 or B7hs-10 are what most use. 6way to hot. But if you did it's a B6hs-10
Wow That was really Cool my friend! Thanks for the ride along! Where did You pick this Avenger 85 up at? I thinking of getting one now!👍
Amazon! 200$ whole kit. Type in (avenger 85 engine) in search.
@@BuildBreakFix Thanks for the update!
Great video and I'm highly interested in the headlight you have on that bike!😊
This what I use. th-cam.com/video/T7sx6xEK5sA/w-d-xo.html
Which one u think its faster the mineralli or avenger?
Pretty equally matched. Avenger just cost 300$ less lol
@@BuildBreakFix oh ok thank you
@BuildBreakFix hey boss if I wanted to run a oko carb on this motor would I need a reed valve set up?
Are you going to run g2 reed and window the piston maybe add boost port
At some point yes 😆. Going to dissect one shortly new out of the box!
Love the Avenger. I don’t think it has the torque of a 110 but it’s a lot faster. Build quality is very good. Had t wash out bottom end. 7 times before assembly. All in all a great motor. I bet they come out with iron sleeve next year
I bet they do. That would be a killer combo.
Nice 😃 One question for a china doll with minarelli 70cc 47mm and a pwk 22 which pilot jet and main jet we should start ? I mean basically with ports cleaned
18-20 carb size normally most use a mikuni 18 or a nibbi 18. Nibbi 18 out of the box should be near perfect jetting.
@@BuildBreakFix hum okay I don't have those only pwk 24
Does it have any power for hills with that sprocket?
I don't think any engines would run a 28t well up a hill
@BuildBreakFix I'm not talking about hill climbing here I'm just talking about regular riding with regular little hills. I have a 28 tooth but I never put it on because I didn't think I would like it but where I live a 32 tooth is fine so I might give it a try
So shoukd i buy one from ebay or the gomax industry?
I got mine off eBay.
Yep that's right avenger 85 is a monster
Better be careful out there build break fix op1zilla might try to throw dildos at you
Thing is crazy over powered 😂
The factory aluminum head gasket has ridge one side which goes to the head do you run ridge up or does ridge go down in the cylinder on 80cc
Ridge goes up. To match the dome of the piston Arch 👍. When it gets crushed it forms a tiny arch inside towards the head.
Was waiting for the death whole that would have been cool on camera 😂
Nice! 🌨️🌨️🌨️ Jingle bells, snow so nice this time of year 😜👍
imagine porting it and putting a pipe boom 60mph easy
Exactly! 💯 My point!
Really not bad for out of the box power. The only thing I didn't like about it was the ring gap in the intake port but apparently that isn't an issue? lol let us know sure you will be making even more power soon!
That was the phantom v3. This one completely has no ring pins over the intakes. The didn't cut the intakes all badly like phantom builds
❤😮🎉 Allsome buddy cool stuff 😃 from cruzermans inventions 😁🦇🌟
🍺😜👍
Moterbike Mike here, DUDES I GOT MY BIKE BACK exactly like it was. Kool beans. Ha ha ha ha
Wow your lucky!
Very it was my cousin's 49 year old boy friend
Got less power then a phantom 85 thought
It's a higher compression ratio you always loss some power for rpms. But rpms are what translates to speed!
Yes man nice video for me avanger it’s not bad engine but I prefer my Minarelli have more more and more good job 🤘🤘🤘
For 200$ though. I love my Athena minarelli don't get me wrong. but that top end cost the whole kit lol price point for what you get is amazing
🚀
For 200$ you get a warp speed reactor 😆