Jason Gouw, Hobao VT 18 minutes into video he talks about 2 speed and how he got it to shift. He also replaced the clutch and flywheel for proper bite. Another tip, he says to replace Hobao stock fuel line. I’m waiting for Hobao to tell me stock setting on 2 speed in a few I’ll report back.,long live nitro ❤️🔥
Just in from Hobao my friend: Hyper VT 2 Speed clutch shoes setup 1.Original factory setting: first clockwise to tighten the shoes' screw, then counterclockwise to loosen 6 turns. (The distance after 6 turns is about 19.6mm, as shown in the picture) 2. Same steps to both shoes and please be aware that the adjustment must turn 6 times counterclockwise to the 2 shoes. 3. After adjustment is completed, please check whether the shoes are adjusted evenly, and it needs to be concentric with the axis, as shown in the picture 4. It could be minor adjusted as per your preferance after assembling on car. Clockwise: the shoes get tightened and transmit to 2nd speed slower Counter-clockwise: the shoes get loosen and transmit to 2nd speed faster Long live Hobao, I love Hobao ♥️!!
I wanted to add, again straight from Hobao technical department in regards to the smaller set screws (not the shoes screws): The set screw should be nearly flush with the surface of the hole. Please note that if it is locked clockwise tighter, it may make changing gears more difficult.
What’s up brother!!! Another great informative video!!! I was to get this Hobao so bad. Can’t wait to see you rest out if the 2 speed shifts after the adjustments🫡
Lol hey bro. Well its an old drill that i only paid 17 bucks for. Im quite sure i was using it to fire up a rotostart on an old XTM buggy. Get this though, i randomly cannot find the charger anymore, so gotta buy a new one anyway.
@@nomusicrchaha. Unfortunately, unlike a Nitro, you don’t need 2 to 3 drills of the same kind, lol Gonna be a trully sickening live tonight btw. Oh and ive got a temu electric rc special comin to the channel soon. A very nice electric, i will send it to you after the vids!!
@@hybrid32494 wow I'm excited and scared at the same time Speaking of sending me something can you send me one of those magnituzers/demagnetizer that look like stairs that you have I've needed one for forever but I don't know what they're called
hey my dude! I've seen that video, and I will test the new 2-speed adjustments I've made soon. I was provided with reference material by a viewer who had information directly from HOBAO themselves. I will check and let everybody know soon. Nitrogang!..
@@hybrid32494 this is straight from Hobao today:Hi Teddy, Regarding your inquiry, the issue is likely due to the adjustment of the spring tension. If you feel that the shifting is too slow, please try loosening the screw for fine-tuning. Additionally, please note that the spring in the original setting is not adjusted too loosely. This is because shifting too quickly might cause confusion for customers. Thank you.
Hybrid I’m really sorry to bother bro … by any chance do you have an extra exhaust for a X-ray nt18 on road car part number xy681001 I’ll buy if for sell
Jason Gouw, Hobao VT 18 minutes into video he talks about 2 speed and how he got it to shift. He also replaced the clutch and flywheel for proper bite. Another tip, he says to replace Hobao stock fuel line. I’m waiting for Hobao to tell me stock setting on 2 speed in a few I’ll report back.,long live nitro ❤️🔥
Just in from Hobao my friend: Hyper VT 2 Speed clutch shoes setup
1.Original factory setting: first clockwise to tighten the shoes' screw, then counterclockwise to loosen 6 turns. (The distance after 6 turns is about 19.6mm, as shown in the picture)
2. Same steps to both shoes and please be aware that the adjustment must turn 6 times counterclockwise to the 2 shoes.
3. After adjustment is completed, please check whether the shoes are adjusted evenly, and it needs to be concentric with the axis, as shown in the picture
4. It could be minor adjusted as per your preferance after assembling on car.
Clockwise: the shoes get tightened and transmit to 2nd speed slower
Counter-clockwise: the shoes get loosen and transmit to 2nd speed faster
Long live Hobao, I love Hobao ♥️!!
I wanted to add, again straight from Hobao technical department in regards to the smaller set screws (not the shoes screws):
The set screw should be nearly flush with the surface of the hole.
Please note that if it is locked clockwise tighter, it may make changing gears more difficult.
What’s up brother!!! Another great informative video!!! I was to get this Hobao so bad. Can’t wait to see you rest out if the 2 speed shifts after the adjustments🫡
I ordered one of these last week. Should be here in a few days. I hope I don’t have this same issue. 🤞🏾
@santis923 check out my posts on this thread straight from Hobao and you will understand how to maintain/ adjust the 2 speed.
I love hobao. I love live streams. I love live streams about Hobao
Thanks for this Hybrid man!
Let’s talk about this further 😂
What were you doing that your harbor freight drill broke
Lol hey bro. Well its an old drill that i only paid 17 bucks for. Im quite sure i was using it to fire up a rotostart on an old XTM buggy. Get this though, i randomly cannot find the charger anymore, so gotta buy a new one anyway.
@@hybrid32494 parts drill lol
@@nomusicrchaha. Unfortunately, unlike a Nitro, you don’t need 2 to 3 drills of the same kind, lol Gonna be a trully sickening live tonight btw. Oh and ive got a temu electric rc special comin to the channel soon. A very nice electric, i will send it to you after the vids!!
@@hybrid32494 wow I'm excited and scared at the same time
Speaking of sending me something can you send me one of those magnituzers/demagnetizer that look like stairs that you have I've needed one for forever but I don't know what they're called
There’s a TH-cam video of a guy with the VT and he gets it to shift just fine. I can find the link for you.
hey my dude! I've seen that video, and I will test the new 2-speed adjustments I've made soon. I was provided with reference material by a viewer who had information directly from HOBAO themselves. I will check and let everybody know soon. Nitrogang!..
@@hybrid32494 this is straight from Hobao today:Hi Teddy,
Regarding your inquiry, the issue is likely due to the adjustment of the spring tension. If you feel that the shifting is too slow, please try loosening the screw for fine-tuning.
Additionally, please note that the spring in the original setting is not adjusted too loosely. This is because shifting too quickly might cause confusion for customers.
Thank you.
Nice car
thank you my dude. I'll be testing out the 2-speed shift point later tonight! wish me luck bro!.
@@hybrid32494 good luck
It will lift out don’t need do take anything else off
How you doin my friend
Hybrid I’m really sorry to bother bro … by any chance do you have an extra exhaust for a X-ray nt18 on road car part number xy681001 I’ll buy if for sell