@@JAKEZILLAKOTM_OFFICIAL they have basically the same details as movie monster series figures yet cost almost 5 times as much just because of articulation
8:06 "WHY DID YOU BECOME LIKE THIS?" "IF YOU WERE NICELY MADE AND DON'T EVEN BREAK A SINGLE JOINT, YOU COULD HAVE BEEN JUST LIKE ME." "THINK KONG, THINK!"
"We need kong, the world needs him." - le monke epicly dies because of his body getting cut in half and because of losing his leg - "Oh, well heck now kong is d e a d"
I never had buyer's remorse as bad as when I bought Ghidorah. What an honest-to-God disappointment in every sense of the word. Inaccurate to the on-screen appearance, colors were off, poseability was crap, joints constantly came out of their sockets. I did manage to sell it for $400 recently though. The funds came in handy to pay off a few bills, so I guess it was good for something!
@@UpFromTheDepths agreed so excited!! I love hiya and I am really glad I have these guys on preorder instead of sh monsterarts especially since I’ve always wanted a good monsterverse ghidorah figure
3:02 They absolutely could’ve made a new effect part since the Awakening Version of Shin form 4 had a very similar breath part. Really sucks that we didn’t get it, especially since this figure is more expensive then the 2019 figure, but that came with a beam.
@@Vipernatural Hey grammar nazi, read the whole comment before getting snotty! Granted he could've used a comma at 'in', but that doesn't warrant this kind of comment, you troll!
Thanks for the video, you've earned a sub for sure. Nice ending, you're a man of culture as well. I truly believe Bandai and Tamashii Nations should make the internal skeleton metal instead of plastic. It'll feel great, and the premium build will excuse the high price. My first breakage of an SHMA figure was 2002 Gojira. It was the figures left elbow joint. It was stuck tight and I tried to soften it with hot water and shift it around. Then it broke, when I tried to bend it for the elbow articulation. I bought another one, and thankfully it's a good one.
Everytime I pose ghidorah I end up having my hands destroyed by the spikey tails, to get it right I usually spend 2 hours trying to pull out the right combination between overweighted wings, fragile tails and weird fork-like holders
Loose points are always a problem with monsterarts imo I mean almost 90% of the articulation is just made up of ball joints which is good because you can get them in natural poses but with the con that the joints will get really loose over time
Imagine buying the 2021 and not the poster version 2019. Yeah my brother bought the poster version 2019 and I'm so jealous. Thankfully we live in the same house so I can mess with it. Edit: jeez this has a lot of likes. Thanks guys!
I feel you man! I've been hearing and watching bad reviews about SH MonsterArts for years! Heck!... Even about the SH Figuarts line! I have some figures myself and I couldn't agree more with you. Sadly that's the reason I decided to not purchase these Godzilla vs Kong figures! Thank you for this video.
Man, this EXACT thing happened to my Kong too. The left leg at the hip ball socket joint snapped off, I mourned for days. It's literally my favorite Kong figure and the damn thing costed so much
I love how you use the figures for expressions, that's great! I also found some SH Monster Arts Godzilla figures (including Ghidorah) for around 60 bucks! That's amazing honestly, should be the average price honestly lol.
@@hamswolo4378 yes But if you find a SHMA 2021s below like 90 dollars or so they're just scams that give you overpriced bootleg vinyls For the ghidorah they already have bootleg versions that released 2 years ago I'm pretty sure everyone should know about those bootleg special color and ghidorah 2019
Man I know it varies from person to person with the QC issues but God I love my 2019 figure. I was one of the lucky ones where I got one with both eyes looming straight, every joint being nice and solid, and it just looking absolutely perfect. I love my 2021 one as well. I'm one if those people.who actually likes thr blue for the mouth and eyes as well though think they may have gone a bit too much by making the teeth blue as well, but I don't mind. I just don't like how thr 2021s hesdsculpt is slightly different when the 2019s was borderline perfection.
I got the 2021 for Christmas last year if you know what I mean (this comment was posted January 2nd) and it’s perfect! It’s my first sh.Monsterarts figure and I really like it! The tail is probably the most posable and any joints that are a little bit visible just make him look more like a robot!
6:36 Well think of it like this You could buy a whole new figure to save money one time Or you can buy a 3D printer to not only be able to just mess around with in general but also to create replacement parts for other figures you own not just that one figure And just ask other people how to work it lol
Tho you'll have to sculpt that part out Then the part might be a bit more fragile The plastic which the original comes is a bit more tougher than the filament one
Yeah, the inconsistent quality control of the Monsterarts line, combined with those ludicrous prices and lack of rereleases for those who missed the original production runs, is a deal breaker for me. At least with NECA, any qc issue was mostly forgivable due to the fair prices. But now that legacy has been eliminated, we're left with the overpriced slag that Tamashi throws at its customers. I really hope another company takes NECA's place as another producer of posable Godzilla figures for much cheaper than SHMA.
I never had any struggles with 2019s tail popping off at the base, I didn't even know it was an issue with anyones 2019 until I saw this video going based on reviews. The only issue I had with the tail was that the very end pops off when moved too much.
Yeah warming up joints on figures to loosen them is like Russian Roulette. It either works like a charm or it’s gonna suck. And unlike roulette, there are five sucky bullets in the chamber instead of one 😕
It's odd that your kong had tight joints because when I recieved mine, it had very smooth articulation and nothing popped out. I can understand the crappy paint, but I can't forgive bandai for QC issues that cause breakages in figures. I worry that it could become the japanese version of neca if they don't remedy the situation.
Wash your figures with DAWN dishwashing liquid and COLD water, avoid doing this on eyes that may be decals, or metal joints. Repeat washing the entire figure with the DAWN and alternate between cold and very warm water, until the joints freely move, then rinse the figure until no more soap bubbles appear. Then let the figure completely dry. Avoid using a heat gun or hair dryer on these figures, the risk of damage is high doing so. I also suggest not using “shock oil”, though popular with some collectors. Clean joints, and gentle treatment does wonders.
So possible solution for stuck joints is use Silicone oil just a few drops in the crevices do some fiddling and it works properly Disclaimer do it at your own risk
That's not even bad My 2001 came with a broken jaw 2002 came with its entire head falling apart with no way to stick them back together And my Rathalos came with a broken wing and wing blade The 2021 Goji came with one of the spread out hands missing Honestly I really think the quality dip from 2019 to now has gotten worse, there shouldn't be a dice roll on what is going to go bad on your figure for the price that you pay, and it doesn't help that the figures are only getting more expensive and coming with less accessories and I'm sick of having to contact bluefin for a replacement and wait about a month or 2 to get an extra figure. It's a miracle my Biollante came with no problems at least
Well this sure was one interesting review on your problems with Monsterarts Arts Godzilla & Kong,but as always this was a great video. Also hope your day can still be great
Spinozilla i actaully don't know why they didn make a hollow earth accesory because the awakening shin godzilla came with a downword beam i think they where just being lazy to be honest.
I actually just got the 2000 Godzilla, and he is awesome! I highly recommend getting him. I got the "special color" and just painted his fins purple. I'm not spending $400 for the original. But to me that one and the Godzilla Earth are the best SHMA Godzillas. I have the Shin, GvK and 2002 too and they are "okay"....Not worth the aftermarket prices. But I'm like you, the Neca in many ways are just as good if not better, with the downside or accuracy for a few (1984 and 2003 i'm looking at you).
I’m gonna be honest: when I didn’t see Kong at the begin. I was thinking “Wait a minute, did the same fate of mine happen to yours.” To then find out it did (with the lower part of the body breaking.) but I kinda know a way to fix him. It’s not the 100% for the lower body. But it kinda works (I mainly use the broken kong for photos and learn more on to fix him better in the future.) but rip kong.
Since you've basically mentioned the possible decline quality of the S.H. MonsterArts figures for it's future (MechaGoji '21 and Goji Ultima), this also makes me kinda sorta worried for Final Wars Goji '04.
Pretty sure those Kong figures are cursed, my dog used mine as a chew toy when I was out the room At least now we know that it should have been Godzilla vs Kong vs Frenchie lol
Man that is a bummer. I got both of these recently and I love both of them. The Kong has a loose left leg and the right arm will not stay on if you move it. But when you get it in a pose it looks nice. i really like the Kong and Godzilla and I hope you eventually get a replacement kong.
Hello, question, could you give me a sh mosterastr 2021? It is that I eveo you have dso then I do not know if both are necessary, I would love to do the 2021 greetings :)
Hey, Spinozilla, I thought I should tell you this about figures that fall apart. Not all of them do that, a lot of time it’s just a factor on how they were specifically made in the factory. Just thought I should say that so that you don’t discredit a figure for a mistake in the factory.
My problem with s.h monsterarts: *THEY ARE LIKE 500 DOLLARS*
I can tell by your profile that your screaming at the prices😂
Its 100
This guy is everywhere
Bad detail…BIGGER PRICE!?
@@JAKEZILLAKOTM_OFFICIAL they have basically the same details as movie monster series figures yet cost almost 5 times as much just because of articulation
4:24 this has some meme potential.
A lot of them do
4:04 is the best part of the video.
0:57
You mean like literally all the poses Spin-off makes them do
GORILLA TAG
1:04 spino: what one of them is even made out of fricken Gatorade.
Me: *drinks Gatorade*
"And i took offense to that"
@@IronJustice2755 A
@@godlylion6857 Sports
To the game
@@Sc0ttish_teen delete that now it’s “ EA sports It’s in the Game
Godzillas mouth looks as if he ate an entire tube of toothpaste
8:06
"WHY DID YOU BECOME LIKE THIS?"
"IF YOU WERE NICELY MADE AND DON'T EVEN BREAK A SINGLE JOINT, YOU COULD HAVE BEEN JUST LIKE ME."
"THINK KONG, THINK!"
@@guillermodarjuan5474 he did lol
@@guillermodarjuan5474 he did 💀
“WHY COULDN’T YOUR JOINTS BE MORE LIKE THAT NECA KONG.”
7:39 you good sir have been proved wrong
5:49 this frame is meme worthy
Godzilla: Mom ordering a pizza
Kong: the son who convinced her to get it
Underrated Comment
@@theparkourmastergaming6392sadly the pizza restaurant was closed
"We need kong, the world needs him." - le monke epicly dies because of his body getting cut in half and because of losing his leg - "Oh, well heck now kong is d e a d"
I never had buyer's remorse as bad as when I bought Ghidorah. What an honest-to-God disappointment in every sense of the word. Inaccurate to the on-screen appearance, colors were off, poseability was crap, joints constantly came out of their sockets.
I did manage to sell it for $400 recently though. The funds came in handy to pay off a few bills, so I guess it was good for something!
The real kick in the balls was they later sold a much better color version, *but still no accessories to justify the price*
Buy hiyas that is is so much better from the pictures
@@godzillakong6597 oh trust me I preordered that thing the moment it went up on BBTS lol, I can't wait! It looks great
@@UpFromTheDepths agreed so excited!! I love hiya and I am really glad I have these guys on preorder instead of sh monsterarts especially since I’ve always wanted a good monsterverse ghidorah figure
@@godzillakong6597its worth it………
For Godzilla 2021, you could always try swapping the feet so the better one has correct feet
yes its true so the paint is better and the articulation
But the other one would have to suffer
@@yurivelasco3931 that has nothing to do with the paint and articulation.........
@@arrestedpissbrain2512 because the second Godzilla has a blue pain on his chest and the tail is loose
@Light The Electrohog but that has nothing to do with the feet because there is no mishap paint on the feet
The 2019 figure tail for you was not normal, mine is fine
Mine is too, except for the tail falling off
Same but my 2019 is broken
Mine is ok aok
Sorry for your guy’s
My 2019 missing it's tail and arms and jaw
3:02 They absolutely could’ve made a new effect part since the Awakening Version of Shin form 4 had a very similar breath part. Really sucks that we didn’t get it, especially since this figure is more expensive then the 2019 figure, but that came with a beam.
The poses he puts Godzilla and Kong in, are hilarious.
Ikr its fuckin golden
Comedy gold
@@Vipernatural Hey grammar nazi, read the whole comment before getting snotty! Granted he could've used a comma at 'in', but that doesn't warrant this kind of comment, you troll!
@@Vipernatural Nobody asked for you to make fun of somebody.
@@Vipernatural Nobody asked for hate
7:28 I wonder how many people caught that joke
Thanks for the video, you've earned a sub for sure. Nice ending, you're a man of culture as well.
I truly believe Bandai and Tamashii Nations should make the internal skeleton metal instead of plastic. It'll feel great, and the premium build will excuse the high price.
My first breakage of an SHMA figure was 2002 Gojira. It was the figures left elbow joint. It was stuck tight and I tried to soften it with hot water and shift it around. Then it broke, when I tried to bend it for the elbow articulation. I bought another one, and thankfully it's a good one.
Everytime I pose ghidorah I end up having my hands destroyed by the spikey tails, to get it right I usually spend 2 hours trying to pull out the right combination between overweighted wings, fragile tails and weird fork-like holders
I like the hard part. You get more time for your buck
My 2021 fell once i caught it but the dorsal plats hurt my hands so much.But it was worth it.
@@rexyanimations9538 yeah, I mean, 60 cm of wingspan :D
@@archeogroudondab7404 ok.But I want to tell you something similar.
@@rexyanimations9538 i remember one time i accidentally dropped my 2019 godzilla, although it wasnt badly damaged, the tip at his spines broke off.
He is one of my most favorite toy reviewers on youtube
But not better than the legend Ryan’s toys reviews
He is a good one to
@@nardar8120 no he’s trash
@@Aden068 HOW DARE YOU DISRESPECT OUR LORD RYAN
(For anyone who thinks this is true I’m just saying a joke so pls dont take it seriously :)
@@Aden068 r/woooooooosh It was a joke
i remember when i rewatched so many times i love your channel!
Loose points are always a problem with monsterarts imo I mean almost 90% of the articulation is just made up of ball joints which is good because you can get them in natural poses but with the con that the joints will get really loose over time
Both my Kong and Zilla have very loose joints that’s why I prefer NECA
6:50 Me trying to figure out my life after high school
Imagine buying the 2021 and not the poster version 2019. Yeah my brother bought the poster version 2019 and I'm so jealous. Thankfully we live in the same house so I can mess with it.
Edit: jeez this has a lot of likes. Thanks guys!
I'm more jealous that you guys have a SHMA
@@lambdadelta821 ikr
@@deepseacocoon lmao all I have a garbage junk 2019 godzilla bootleg and a third party ghidorah 1964 and a neca shin
I'm planning to either get neca Mothra or 2-3 Bandai godzillas
@@lambdadelta821 I got the 2019 when it was cheap, because it was near my birthday.
4:06 I laughed so hard!
I think you should try supergluing the kong back, and if his joints won’t move, maybe use it for a diorama?
or plastic cement
@Lego Boba Fett exactly😁
@Lego Boba Fett well it's broke so you might as well make the most out of it so you don't feel like you lost any money on it.
Yes
@Boba Fett 🎃 it's better than having it is pieces
Spinozilla: and Godzilla 2000 figure
Me: same
Spinozilla: too bad I don’t have enough money
Me: same
This part made me laugh idk why💀 2:21
same
Ha
Lol same
XD
"pop one of em of, and pop the other one back on" *piece falls off*
Spinozilla: 😐
“You just pop that hand off and put the other one on” *hand falls off*
I feel you man! I've been hearing and watching bad reviews about SH MonsterArts for years! Heck!... Even about the SH Figuarts line! I have some figures myself and I couldn't agree more with you. Sadly that's the reason I decided to not purchase these Godzilla vs Kong figures! Thank you for this video.
@@cryoquestionmark better of see the reviews first because that mechagodzilla only comes with
Two pair of hands
@@alternativeuniverse6257 no godzilla 2099
😑
I like how the NECA godzilla figure was pointing a gun at the SH Monsterarts godzilla figure lol
Frickin love your poses and panning shots! 😆😆🤙🔥
Man, this EXACT thing happened to my Kong too. The left leg at the hip ball socket joint snapped off, I mourned for days. It's literally my favorite Kong figure and the damn thing costed so much
f
Mine never snapped but it’s very loose
I got the kong reissue, the one and ONLY problem wast that the diafram was loose, fixed that with some glue
I love how you use the figures for expressions, that's great!
I also found some SH Monster Arts Godzilla figures (including Ghidorah) for around 60 bucks! That's amazing honestly, should be the average price honestly lol.
Are you sure those aren't scams
@@lambdadelta821How?? Lol our PFPs' match.
@@hamswolo4378 yes
But if you find a SHMA 2021s below like 90 dollars or so they're just scams that give you overpriced bootleg vinyls
For the ghidorah they already have bootleg versions that released 2 years ago I'm pretty sure everyone should know about those bootleg special color and ghidorah 2019
@@lambdadelta821 They were lincensed.
@@hamswolo4378 i dont think theres such thing as an shma ghidorah that costs below 100$
Bro that seller is so nice
r.i.p monke boi edit: holy shesh 34 likes!? This is my successfull comment :)
We needed Kong the world needed him :(
Rip mokey kinda cried
We alllll did😭😭😭😭
r.i.p monke :(
No!
That thumbnail is crazy💀
Man I know it varies from person to person with the QC issues but God I love my 2019 figure. I was one of the lucky ones where I got one with both eyes looming straight, every joint being nice and solid, and it just looking absolutely perfect.
I love my 2021 one as well. I'm one if those people.who actually likes thr blue for the mouth and eyes as well though think they may have gone a bit too much by making the teeth blue as well, but I don't mind. I just don't like how thr 2021s hesdsculpt is slightly different when the 2019s was borderline perfection.
I also have the loose tail and wish the shade of blue was more accurate buy don't mind it too much
I got the 2021 for Christmas last year if you know what I mean (this comment was posted January 2nd) and it’s perfect! It’s my first sh.Monsterarts figure and I really like it! The tail is probably the most posable and any joints that are a little bit visible just make him look more like a robot!
3:32
Just use the right foot from the 2019 then ur 2021 figure is perfect (only do this if u risk ur 2021 breaking)
4:24 lmfao I love the 🤷♂️ poses
Rip Kong
I'm happy for that
Me too
Rip MANKE
Rip fun love able monkey
@@zillaboi353 you do realize if kong died godzilla would also die
I love how in the Godzilla 2019 resurrection scene I love you used the scene 2021 Godzilla hollow earth scene was up words then it went down
6:36
Well think of it like this
You could buy a whole new figure to save money one time
Or you can buy a 3D printer to not only be able to just mess around with in general but also to create replacement parts for other figures you own not just that one figure
And just ask other people how to work it lol
I hate you :)
@@Prehistoryenthusiast9384 do you hate me?
Tho you'll have to sculpt that part out
Then the part might be a bit more fragile
The plastic which the original comes is a bit more tougher than the filament one
Za Warudo crying over kong's dead body was the funniest shit i've seen in the entire day
You know it be cool if they just reused shm goji 2019 cuz I the head sculpt better
Spino: while I was playing with it
Me: that came out wrong really wrong
6:06
Yeah, the inconsistent quality control of the Monsterarts line, combined with those ludicrous prices and lack of rereleases for those who missed the original production runs, is a deal breaker for me. At least with NECA, any qc issue was mostly forgivable due to the fair prices. But now that legacy has been eliminated, we're left with the overpriced slag that Tamashi throws at its customers.
I really hope another company takes NECA's place as another producer of posable Godzilla figures for much cheaper than SHMA.
It happened!
Hiya toys make better goji figures than sh monster arts and for only $50
Kong can’t move it, move it anymore
I never had any struggles with 2019s tail popping off at the base, I didn't even know it was an issue with anyones 2019 until I saw this video going based on reviews. The only issue I had with the tail was that the very end pops off when moved too much.
Yeah warming up joints on figures to loosen them is like Russian Roulette. It either works like a charm or it’s gonna suck. And unlike roulette, there are five sucky bullets in the chamber instead of one 😕
It's odd that your kong had tight joints because when I recieved mine, it had very smooth articulation and nothing popped out. I can understand the crappy paint, but I can't forgive bandai for QC issues that cause breakages in figures. I worry that it could become the japanese version of neca if they don't remedy the situation.
"so what happend?" as Kong proceeds to shrug 4:22
SH Figuarts Mechagodzilla cost more than my apartment rent. That's including electric bills, water bills. God help
Yea
It's not like there metal
It's only $150 what type of apartment are you living in where bills are that cheap so that way I can move in lol
@@diegolaradiaz8948 my parent's garage
@@Fareru4 /holup
Wash your figures with DAWN dishwashing liquid and COLD water, avoid doing this on eyes that may be decals, or metal joints. Repeat washing the entire figure with the DAWN and alternate between cold and very warm water, until the joints freely move, then rinse the figure until no more soap bubbles appear. Then let the figure completely dry. Avoid using a heat gun or hair dryer on these figures, the risk of damage is high doing so. I also suggest not using “shock oil”, though popular with some collectors. Clean joints, and gentle treatment does wonders.
Now I’m kind of worried about my king Kong Neca figure, and my Godzilla neca scared😐
So possible solution for stuck joints is use
Silicone oil just a few drops in the crevices do some fiddling and it works properly
Disclaimer do it at your own risk
That's not even bad
My 2001 came with a broken jaw
2002 came with its entire head falling apart with no way to stick them back together
And my Rathalos came with a broken wing and wing blade
The 2021 Goji came with one of the spread out hands missing
Honestly I really think the quality dip from 2019 to now has gotten worse, there shouldn't be a dice roll on what is going to go bad on your figure for the price that you pay, and it doesn't help that the figures are only getting more expensive and coming with less accessories and I'm sick of having to contact bluefin for a replacement and wait about a month or 2 to get an extra figure.
It's a miracle my Biollante came with no problems at least
Damn ypu must been through alot
Jesus Christ
0_0
Spino: I really like this figure!
Also spino: I ABSOLUTELY HATE THIS THING!
Well this sure was one interesting review on your problems with Monsterarts Arts Godzilla & Kong,but as always this was a great video.
Also hope your day can still be great
Bruh
Why do I keep seeing u
this has become one of my favorite youtube videos.
5:49
*Kong:So well they fix me?*
*Godzilla:😬📞Nope*
*Kong:🙁…*
*Godzilla:Sry Monke*
*Kong:🥲*
when kong loose his legs he looks like a monkey from gorilla tag
4:35 SAME I BROKE MY GODZILLA ARM BECAUSE IT WAS TIGHT 😭
I feel bad :(
Spinozilla i actaully don't know why they didn make a hollow earth accesory because the awakening shin godzilla came with a downword beam i think they where just being lazy to be honest.
I actually just got the 2000 Godzilla, and he is awesome! I highly recommend getting him. I got the "special color" and just painted his fins purple. I'm not spending $400 for the original. But to me that one and the Godzilla Earth are the best SHMA Godzillas. I have the Shin, GvK and 2002 too and they are "okay"....Not worth the aftermarket prices. But I'm like you, the Neca in many ways are just as good if not better, with the downside or accuracy for a few (1984 and 2003 i'm looking at you).
i like how the neca Godzilla 2019 was holding a gun
I’m bored and you just cured my bordisum
Hey, not gonna lie, love this joke at 9:08, because I can relate. Plz make more jokes like that, and love ur work ;)
When I saw that Godzilla singular point I wanted it straight away bro!
Same
my 2019 sh monsterarts tail has a floppy tail,your sh monsterarts 2021 godzilla has a floppy tail too.
I’m gonna be honest: when I didn’t see Kong at the begin. I was thinking “Wait a minute, did the same fate of mine happen to yours.” To then find out it did (with the lower part of the body breaking.) but I kinda know a way to fix him. It’s not the 100% for the lower body. But it kinda works (I mainly use the broken kong for photos and learn more on to fix him better in the future.) but rip kong.
The 1995 burning Godzilla I have with no problems
4:19 Godzilla,Kong, the axe are in perfect pose reson:it's how Godzilla vs Kong should have been
I finally found you again man, keep up the good work
4:14 saddest anime deaths of all time
Gojo kong💀
9:13
I thought that Logo looked familiar!
Ive got a few necas, they're good but one of my gojis has a bad leg and doesnt stand flat
I have a neca shin, and that thing sucks! His arms are different molds and the tail pops off everytime i pose it.
Hey dude try putting the figure in warm water for me it works
@Lego Boba Fett target
Looking at kong like this makes me think of shattered Monty from security breach
Since you've basically mentioned the possible decline quality of the S.H. MonsterArts figures for it's future (MechaGoji '21 and Goji Ultima), this also makes me kinda sorta worried for Final Wars Goji '04.
And zilla
Oh my sweet summer child the decline of monsterarts quality control started long ago in 2014
@@diegolaradiaz8948 at least we the 3rd party figures, right?
@@jrexon2001 what 3rd party figures?
@@tylervanpeursem7627 as in, if the quality of the main line isn't doing good, we can rely on the third-party companies?
Spino: *says a compliment about a figure*
Also spino: However..
4:10 He’s Dead.
this part got me
3:36 Hi other me
Pretty sure those Kong figures are cursed, my dog used mine as a chew toy when I was out the room
At least now we know that it should have been Godzilla vs Kong vs Frenchie lol
Man gotta love it when a 160-300$ toy of a monke gets turned into a chew toy
I got a dragon ball super legendary supersaiyan broky that came with 2 left hands 💀
0:26 that what I said in the beginning.
Godzilla 2021 did shoot up into the air during the sea battle
2:50 You really tried hard there buddy ;)
The end... I feel you
Man that is a bummer. I got both of these recently and I love both of them. The Kong has a loose left leg and the right arm will not stay on if you move it. But when you get it in a pose it looks nice. i really like the Kong and Godzilla and I hope you eventually get a replacement kong.
*_sweats nervous for Final Wars Goji '04's quality_*
Spino: the prices can range from $60-$100
Me:you mean $60-$750
Ah shoot, you're right.
My bad
Hello, question, could you give me a sh mosterastr 2021? It is that I eveo you have dso then I do not know if both are necessary, I would love to do the 2021 greetings :)
You could put the upper half of Kong in a figurine wheelchair and make it a Sh Monsterarts Kong handicap ver
My only struggles is it loose ball joints the tails and pant control
*ME TOO!!!* : 1:57
When I was waiting for our loveable monkey then I saw that “he’s dead”” I laughed so hard and I was a bit sad that Kong is rip apart lol
The packaging is good
The tail base joint issue with ur 2019 is with my 2021, so I ordered a 2019 version and it was a bootleg 😭
1:21 wait..... if you dont like Fortnite..... why do you own a figure? (edit) i get it if it where just for content.
my g21 fingers leg fell off and It had to be glued and a tail broken it also had to be glued at the end of it and it has two of the same arms
Hey, Spinozilla, I thought I should tell you this about figures that fall apart. Not all of them do that, a lot of time it’s just a factor on how they were specifically made in the factory.
Just thought I should say that so that you don’t discredit a figure for a mistake in the factory.
Spino you should put glue on kongs broken torso and let it dry
8:59
My kong figure turned out perfectly, no falling off parts, easy movements, and fun to play fight with godzilla and the other kaiju I own