I just wanted to thank you for this AWESOME video. Excellent work, the tone ring was a pain to get in straight but job done for 20 bucks opposes to 780 that the shop wanted. Cheers 🍺
Thank you for nice words. I'm glad the video is helpful. If you have changed ring on one side only be prepared to get it done on other side as well. On my car, I had to change ring on other side within 6 months as they're both equally exposed to elements. All the best buddy👍🍺
Thank you brother! It's hard finding vids/info on these chrysler/dodge AWD 6th generation sedans. I have a 2010 charger r/t awd with the 5.7. Currently just had speed sensor codes pulled for rear left. Looks like I'll be buying 4 of these and just gonna do all four to get it out of the way for I'm sure you know that if one is bad...the others are not far behind. God bless!
You're absolutely right. Them rings are exposed to weather, road dirt, brake dust, salt in winter etc, and if one is desintegrated others are not far off Good luck and God bless you
I just had to tell you. At around 23:40 I seen those jack stands. They are scary - Doing a brake job on a 1965 Plymoth one of them colasped just as I was walking away. it could have been the end of my legs or worse. Please get better 2-3 ton cast ones - you deserve the better ones! Thanks - nice video and good luck.
Abs tone ring amzn.to/3LIzk3E Wheel bearing removal kit used to press new tone ring in amzn.to/3VFx81r Oxy-propane torch amzn.to/3VGwUY8 Socket set amzn.to/44CcTpC
I'm in UK, I've got one from Euro car parts. On their computer was listed same as for Mercedes E class The other one I've got from Auto Doc (online car parts shop, also in UK)
I can't find details of exact seller but it was like one of these www.ebay.co.uk/itm/234051600492?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2eVf865iQqW&sssrc=2349624&ssuid=vNh3eR6ZTve&var=&widget_ver=artemis&media=COPY
It is bearing removal tool, it can be purchased from many tool shops Here is an example amzn.eu/d/arYIEbx BOOMSTART 19Pcs Universal Front Wheel Drive Bearing Hub Removal Install Puller Tool Kit for Cars Vans Light Trucks amzn.eu/d/arYIEbx Please subscribe and share🙂
Yeah, tried this and the ring wouldn't go on to save my life. It ended up deforming, it's like was a hair too small. Oh well, time to replace the axles
I just wanted to thank you for this AWESOME video. Excellent work, the tone ring was a pain to get in straight but job done for 20 bucks opposes to 780 that the shop wanted. Cheers 🍺
Thank you for nice words. I'm glad the video is helpful. If you have changed ring on one side only be prepared to get it done on other side as well. On my car, I had to change ring on other side within 6 months as they're both equally exposed to elements.
All the best buddy👍🍺
That's a very good video mate, well done for taking the time out to show the details.
Thank you 👍🙂
Thank you brother! It's hard finding vids/info on these chrysler/dodge AWD 6th generation sedans. I have a 2010 charger r/t awd with the 5.7. Currently just had speed sensor codes pulled for rear left. Looks like I'll be buying 4 of these and just gonna do all four to get it out of the way for I'm sure you know that if one is bad...the others are not far behind. God bless!
You're absolutely right. Them rings are exposed to weather, road dirt, brake dust, salt in winter etc, and if one is desintegrated others are not far off
Good luck and God bless you
I just had to tell you. At around 23:40 I seen those jack stands. They are scary - Doing a brake job on a 1965 Plymoth one of them colasped just as I was walking away. it could have been the end of my legs or worse. Please get better 2-3 ton cast ones - you deserve the better ones! Thanks - nice video and good luck.
Thank you for your concern, I will follow up your advice and get stronger ones for sure
All the best 🙂
Abs tone ring
amzn.to/3LIzk3E
Wheel bearing removal kit used to press new tone ring in
amzn.to/3VFx81r
Oxy-propane torch
amzn.to/3VGwUY8
Socket set
amzn.to/44CcTpC
Can you please tell me were I can get the tone magnetic ring from I need both rear and left front my 300c is the 5.7 hemi AWD 2008 I am in Canada
I'm in UK, I've got one from Euro car parts. On their computer was listed same as for Mercedes E class
The other one I've got from Auto Doc (online car parts shop, also in UK)
When you done you need to clear the codes?
Absolutely yes👍
Does anyone know if the axle shaft would fit through the wheel bearing hole? I want to replace my axle
I don't think so, CV joint is bigger than bearing hole
merci thank..
You're welcome 👍🙂
Can you give a link for the torch you are using
I can't find details of exact seller but it was like one of these
www.ebay.co.uk/itm/234051600492?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2eVf865iQqW&sssrc=2349624&ssuid=vNh3eR6ZTve&var=&widget_ver=artemis&media=COPY
@MrFxr thank order one now the torch I have is too big to get into the opening for the back volts
Whats that sleeve tool called 44:40 ?
It is bearing removal tool, it can be purchased from many tool shops
Here is an example
amzn.eu/d/arYIEbx
BOOMSTART 19Pcs Universal Front Wheel Drive Bearing Hub Removal Install Puller Tool Kit for Cars Vans Light Trucks amzn.eu/d/arYIEbx
Please subscribe and share🙂
Yeah, tried this and the ring wouldn't go on to save my life. It ended up deforming, it's like was a hair too small. Oh well, time to replace the axles
I'm sorry to hear that. To be honest, it is quite difficult part of the job. It is very tight fit
All the best
The gum ......
.