AUDI A3 8P - How To Remove Rear Bumper & Lower Valance Diffuser Removal Replacement 2004-2012
ฝัง
- เผยแพร่เมื่อ 11 พ.ค. 2021
- Guide on how to remove the rear bumper assembly from an Audi A3/S3 8P 3-door (Mk2), years 2004 to 2012.
Tools used:
-T25 Torx: amzn.to/2NWrfON
-10mm socket & extension: amzn.to/3luPyQv
-Flat Screwdriver: amzn.to/3qRPuMn
-Trim Removal Tool: amzn.to/3pKZtBP
-------------------------------
www.selectvehiclespares.co.uk
------------------------------- - ยานยนต์และพาหนะ
Nut falling in the body part is just wow decision by audi.
Another great video and the tip to remove the dropped nut with the magnet, was excellent. Very pro. 👍
Clever idea with the magnet, top job there guys
Thank you. Worked well with 2007 Audi A3 Sportback Attraction 1.9 TDI E-power.
The most difficult thing was to get the bults in the bagage area
Put tape over the 10mm deep socket. Then press the socket on the nut with the tape acting as a wedge. The nut won't come off as you undo it
Very helpful! Thanks for posting.
Thank you! Very helpful!
Brilliant that. Cheers.
Great vid 👍
Thank you very much!
I have a 10mm long socket (50mm) and it will NOT reach 🤔, the only thing that I can think of is to enlarge the hole on the outside enough to be able to get something in to get a grip of the bolt etc. and turning it and then pull it out. and afterward's insert a rubber blanking grommet. 👍
Any suggestions would be really appreciated.
Tony
😊
The socket we used had an overall length of 60mm, so it could just be that you need a slightly longer/deeper socket. Personally we wouldn't recommend making the hole bigger, it would need to be quite large to get something on the bolt.
You not the only one .
.all my socket sets are 50mm also .I had to weld an extension .
👍👍👍
Tools used:
-T25 Torx: amzn.to/2NWrfON
-10mm socket & extension: amzn.to/3luPyQv
-Flat Screwdriver: amzn.to/3qRPuMn
-Trim Removal Tool: amzn.to/3pKZtBP