How to Replace Turn Signal 94-95 Honda Accord

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024

ความคิดเห็น • 58

  • @1AAuto
    @1AAuto  3 ปีที่แล้ว

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @Mrfrenchdeux
    @Mrfrenchdeux 9 ปีที่แล้ว +5

    Thanks for this video, I would never have figured this out myself. The job was still hard with 20+ year old rusty parts, but I got it done.

  • @markjones4358
    @markjones4358 ปีที่แล้ว

    You just saved my sanity sir. Thank you!!!

  • @MasDemons
    @MasDemons 13 ปีที่แล้ว +1

    Great video. Saved me a ton of time and work; plus, you guys were the only folks on the web offering this information for free.

  • @fizzlefresh14
    @fizzlefresh14 5 ปีที่แล้ว +2

    also works for a 96 accord

  • @Imurge
    @Imurge ปีที่แล้ว

    good stuff my friend. just what i needed to hear to help me change my bulb 💡

  • @1AAuto
    @1AAuto  13 ปีที่แล้ว

    Glad to help! Just keep us in mind next time you need a part. Thank You!

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว

    You may be able to reach in back of the headlight to change the headlight bulb. You might need to remove the battery on one side if you can't fit your hand in the back to remove the bulb.

  • @1AAuto
    @1AAuto  11 ปีที่แล้ว

    The only other place that you could possibly find a new one would be through the dealer but it will most likely be a harness with several other connections tied into it.

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว

    @MERALYify You might want to check for a bad ground, or possible bad relay somewhere in the wiring.

  • @1AAuto
    @1AAuto  11 ปีที่แล้ว

    Thanks for watching. Have a great day!

  • @MrTantalust
    @MrTantalust 12 ปีที่แล้ว

    Mine were very, very rusted, to the point I had to [carefully] drill the screw out. Then after replacing the bulb, a couple of dabs of clear silicon seal around the orange housing secures it back in place. I'll just use a razor knife to cut through it to get access again, if I ever have to.
    Thanks for the video.

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว

    The bulb should have a number on it. if you can't find it, your local auto parts store should be able to look it up for you.

  • @MrAdamsJ2
    @MrAdamsJ2 12 ปีที่แล้ว +1

    @1aauto . Thank you. There were still some left over parts from the old light in I had to take out first, after that it was obviously the same process, as you say, thanks. Thanks also for the blinker installation instructions, I never would have figured it out otherwise. American's helping each other, that's as it should be, we don't need government intrusion.Now I can help someone as you have helped me, thanks again.

  • @slprn67
    @slprn67 3 ปีที่แล้ว

    Thank you for sharing.

  • @1AAuto
    @1AAuto  13 ปีที่แล้ว

    @YouCanMakeItCrafty You could try to use some penetrating oil on it. that might help to free it up.

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว

    @MrAdamsJ2 The removal process would be the same.

  • @Gonzalez2500
    @Gonzalez2500 12 ปีที่แล้ว

    Exactly the help I needed. Thank you guys. Sweet video.

  • @dumbstard
    @dumbstard 11 ปีที่แล้ว

    thanks again for the video - different car and problem this time

  • @BongHitsandGrowTips
    @BongHitsandGrowTips 11 ปีที่แล้ว

    Hey great video but could you guys tell me where i could get the plug that the bulb housing connects to? Behind my turn signal reflectors all I have is cut off wires.. I need the connector that hooks to the back of the bulb housing, with pigtail wires coming off.. any ideas on where to get this other than a pick-apart?

  • @wah12111
    @wah12111 9 ปีที่แล้ว

    Many Thanks Great Video.. I was about to take the headlights out to get to it.

    • @1AAuto
      @1AAuto  9 ปีที่แล้ว

      Thank you for watching. Please let us know how the repair comes out!
      1aauto.com 888-844-3393

  • @arminvogl4594
    @arminvogl4594 11 ปีที่แล้ว

    You guys are awesome, thanks for the 411

  • @TankDogg-bm7es
    @TankDogg-bm7es ปีที่แล้ว

    Car was hit front driver side, the bottom signal doesn't work with new bulb, what could be the problem?

  • @755meka
    @755meka 9 ปีที่แล้ว

    Hi I have a 1991 honda accord lx signal light that I replaced on the driver's side with the help of your video but the signal light case won't go in all the way and secure there is a black piece that is keeping it from going in and it wont secure even with the screw can you give me any advice will be much appreciated.

    • @1AAuto
      @1AAuto  9 ปีที่แล้ว

      Meka Hairston If it's a piece that helps to secure the light in place, you may want to check if to see if it's damaged. Hope this helps you out.

  • @YouCanMakeItCrafty
    @YouCanMakeItCrafty 13 ปีที่แล้ว

    The screw holding in the turn signal seems to be rusted, any advice for how I can get it out?

  • @Impulse_Society
    @Impulse_Society 3 ปีที่แล้ว

    What If you don't have the clips

  • @kamper951
    @kamper951 13 ปีที่แล้ว

    very helpful.. thank you

  • @adammiller3996
    @adammiller3996 7 ปีที่แล้ว +1

    What headlights and corner lights are these?

    • @1AAuto
      @1AAuto  7 ปีที่แล้ว

      We carry the headlights shown in this video on our website. Here's a link to them. We also offer a lifetime warranty on them goo.gl/VO0VNr

  • @MrAdamsJ2
    @MrAdamsJ2 12 ปีที่แล้ว

    This is great for the easy side but what about the hard one, the passenger side?

  • @Jseitz81
    @Jseitz81 5 ปีที่แล้ว

    I know this is 4 years old lol but maybe it will get a response. What happens when the screw (for the fixture) just keeps spinning, is there a washer or something that stops it?

    • @jinxside5533
      @jinxside5533 2 ปีที่แล้ว

      Same problem did u get it out

  • @rodrigopineros6016
    @rodrigopineros6016 5 ปีที่แล้ว

    Thanks Mike

    • @1AAuto
      @1AAuto  5 ปีที่แล้ว

      Thanks for checking us out. 1aauto.com +Rodrigo Pineros

  • @raiderkid_2096
    @raiderkid_2096 7 ปีที่แล้ว

    I have a 97 accord special edition and the signal lights only work when the emergency lights are activated not when trying to change lanes. Please help

    • @1AAuto
      @1AAuto  7 ปีที่แล้ว

      +raiderkid _209 I would recommend you have your vehicle diagnosed by a reputable mechanic, as multiple things could be causing this issue.

  • @diskafuti2514
    @diskafuti2514 8 ปีที่แล้ว

    thank you so much!

  • @omartorres2926
    @omartorres2926 10 ปีที่แล้ว

    Hell do you guys have a video on how to install oem fog lights for this car ?

    • @1AAuto
      @1AAuto  10 ปีที่แล้ว

      We currently do not have an auto repair video that shows this particular repair. We'll keep this in mind in the event that we need to make this repair in the future. 1aauto.com 888-844-3393

  • @deandredane2388
    @deandredane2388 4 ปีที่แล้ว

    What is the number/kind of bulb that goes there ?

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +Deandre Dane The bulb type would depend on your vehicle type. You would be able to find this info at any auto bulb retailer. Thanks for checking us out! 1AAuto.com

  • @fishermanjones89
    @fishermanjones89 7 ปีที่แล้ว

    Is it the same steps for 2002 honda accord signal light?

  • @girlsdream93
    @girlsdream93 9 ปีที่แล้ว

    where do I get the bulb and the socket? PLEASE HELP!

    • @1AAuto
      @1AAuto  9 ปีที่แล้ว

      Andrew Ramadhin You may be able to get a replacement socket and bulb from your local auto parts store. Hope this helps you out. 1aauto.com

  • @pugmurder3759
    @pugmurder3759 3 ปีที่แล้ว

    Bro how the hell did u take the bumper lights off without a sweat

  • @williamholcomb1490
    @williamholcomb1490 12 ปีที่แล้ว

    That IS the passenger side. Did you mean the drivers side? It's the same. At least it is on my 97 Accord SE.

  • @bryanperaza2784
    @bryanperaza2784 7 ปีที่แล้ว

    My screw is rusted and wont come out, what should I do?

    • @1AAuto
      @1AAuto  7 ปีที่แล้ว

      I'd soak it in penetrating oil, let it sit for a couple hours, then soak it again when I come back. Worst comes to worst, you could always remove the bumper cover and drill the screw out. Buy your auto parts from 1AAuto.com?TH-cam&CTA%20Comment&ATony

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว

    If you type this in Google it will come up for you. e-Z3X9vFQ4Y

  • @iconaclastor
    @iconaclastor 8 ปีที่แล้ว

    I just need to get a longer screwdriver thanks

    • @1AAuto
      @1AAuto  8 ปีที่แล้ว

      Having the right tools makes any job easier! Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/1996-97-honda-accord-parking-light-pair/i/1alpp00084?TH-cam&CTA%20Comment&ATony

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว

    This video will show you how to accomplish that. Hope this helps you out. th-cam.com/video/S8-p2ezZv_8/w-d-xo.html&feature=plcp

  • @pattroyka7470
    @pattroyka7470 5 ปีที่แล้ว

    Its the left turn signal thats the problem dude

  • @uvebeentagged
    @uvebeentagged 10 ปีที่แล้ว

    How bout an 89 Honda?

    • @1AAuto
      @1AAuto  10 ปีที่แล้ว

      We currently do not have an auto repair video that shows this particular repair. We do carry a new lens for it on our website with FREE SHIPPING in the lower 48 states. There should be two screws on the back, that need to be removed so that you can replace the parking light. Here's a link to them on our website. www.1aauto.com/1A/parking-lights/Honda/Accord/-/-/1989?VideoReply&VideoReply&ATony

  • @1AAuto
    @1AAuto  12 ปีที่แล้ว +1

    We sure do. Here's a link to it on our channel. We also carry the replacement headlights and turn signals for your 94-97 Honda Accord on our website 1aauto.com 888-844-3393 Video th-cam.com/video/e-Z3X9vFQ4Y/w-d-xo.html&feature=plcp