Little old, and already educated on clutches, but I figured I would look to see what videos were out there for people. Honestly not a bad video. Just keep in mind to never use compressed air as the clutch can contain asbestos and other harmful material. Also, if replacing the flywheel, make sure you buy a set of ARP or other brand bolts...don’t reuse the old bolts
Looks to be a very crisp and clean video. Everything is easy to see except one thing: the pilot bearing. I did not see any instructions regarding the pilot bearing.
My guess is the red tool what you see in the middle of pressure plate, that will self-centered the component at the right place. Then you lock the bolts and voilà... Most of the time this tool is delivered with the clutch kit itself.
Yeah right....it's very easy when the vehicle manufacturer gave enough clearance to align the gearbox perfectly straight with the engine. 99% of gearboxes need to be angled so that the bellhousing will get as close to the engine as possible, then the tail lifted. Even then it won't go in on just the first try.
When aligning the transmission and engine, it's important to be able to cuss fluently in the vehicle's native language. I can cuss in German, Japanese and American English. I'd need to learn Swedish to work on a Saab, or Korean to work on a Kia.
1:18, that’s bullshit, it is possible, you can use a pair of vise grips to clamp it down while you tighten it up, I did. But guess what, I have severe clutch chatter, and have to do this whole process again with a new clutch set.
Sir wagon r cng lxi 2020 model.12000 km chali hai.accelator pe jor pad raha hai.pick up ekdam sahi hai.clutch dabane par thodi awaz aa rahi hai.gadi ekdam bhari si chal rahi hai.kya problem hoga sir?
In the very old days flywheels were made extra thick and heavy to smooth out the engine vibration, that made the grinding option more feasible and economic than replacing especially in some poor countries in the world. The newer models are fitted with lighter weight flywheels with little room to wear so we have been replacing them most of time in recent years.
@@biaohan4358 I think you are referring to turning a flywheel on a lathe which makes sense on a thick steel OEM part. Nowadays everything is made to be thrown away.
@@richrich9560 Is it really? I bought my first car which is a 94 Honda Accord and the gears are hard to shift now but I don't know if it's oil or clutch problem.
Dear sir I am an employee o exedy india. I do not understand the hysteresis concept in clutch disc. Will u pl.explain what it is actually & which parts affect on hysteresis loss.
There is no need to replace the flywheel unless it's unevenly worn, scratched or heat damaged/warped, as the video described. It's a good idea to replace the rear main seal on the engine to prevent a leak 10,000 miles after a clutch replacement, which would require another new clutch and the $7 seal. It's also a good idea to replace the pilot bearing.
Cleanest bell housing I've ever seen
here is Japan,
no clean environment. Equal no jobs and no customers
Little old, and already educated on clutches, but I figured I would look to see what videos were out there for people. Honestly not a bad video. Just keep in mind to never use compressed air as the clutch can contain asbestos and other harmful material. Also, if replacing the flywheel, make sure you buy a set of ARP or other brand bolts...don’t reuse the old bolts
This video appears to have the production quality of one made in 1991.
"Industry leading quality assurance" with old computers from the 90's @ 8:10 haha
that's what makes it good :)
Looks to be a very crisp and clean video. Everything is easy to see except one thing: the pilot bearing. I did not see any instructions regarding the pilot bearing.
My guess is the red tool what you see in the middle of pressure plate, that will self-centered the component at the right place.
Then you lock the bolts and voilà...
Most of the time this tool is delivered with the clutch kit itself.
He didn't want to get his white gloves dirty . 😂
Believe or not, some vehicles don’t use a Pilot bearing. True 👍🏻
Very informative and knowledgeable video
helpfull video for me. so thank you bro.
Was just 🤔 wondering slow 283 Chevy does it take different clutch pressure plate and throw out bearing 😅
Yeah right....it's very easy when the vehicle manufacturer gave enough clearance to align the gearbox perfectly straight with the engine. 99% of gearboxes need to be angled so that the bellhousing will get as close to the engine as possible, then the tail lifted. Even then it won't go in on just the first try.
Exactly
When aligning the transmission and engine, it's important to be able to cuss fluently in the vehicle's native language. I can cuss in German, Japanese and American English. I'd need to learn Swedish to work on a Saab, or Korean to work on a Kia.
Right. 99 percent of installs are the dude shacking the crap out of it.
This car is brand new. Not a rustry, crusty piece of crap with half the bolts broken off in the aluminum housing.
5:02 - What kinda spray do you mean when you say "Cleaner"? Would Brake cleaner suffice?
Natnael brake cleaner spray would work ok
Paolo Inigo yeah, I read the label which said “Brake/Clutch cleaner “ thanks man
Good luck changing the clutch on the LS400.
1:18, that’s bullshit, it is possible, you can use a pair of vise grips to clamp it down while you tighten it up, I did. But guess what, I have severe clutch chatter, and have to do this whole process again with a new clutch set.
What makes clutch pedal hard in hydralic clutches epecially in ford fiesta 1.4 tdci
1998 4 cylinder Honda accord Lx clutch replacement - order kit? Stage??
Thanks for your sharing vedeo..
Do you have racing clutch for mitsubishi mirage 2015?
12 años o 201000 kilómetros duró el disco de embrague de mi L200. Creó que cumplió.
Very good👍👍👍👍👍👏👏👏
Exady good
Thanks
Super idea
good video
Sir wagon r cng lxi 2020 model.12000 km chali hai.accelator pe jor pad raha hai.pick up ekdam sahi hai.clutch dabane par thodi awaz aa rahi hai.gadi ekdam bhari si chal rahi hai.kya problem hoga sir?
Subok kona ito sa jipniy
Nice I Like it's
Grinding the flywheel?? Oh lawd! Just replace the damn thing.
In the very old days flywheels were made extra thick and heavy to smooth out the engine vibration, that made the grinding option more feasible and economic than replacing especially in some poor countries in the world. The newer models are fitted with lighter weight flywheels with little room to wear so we have been replacing them most of time in recent years.
@@biaohan4358 I think you are referring to turning a flywheel on a lathe which makes sense on a thick steel OEM part. Nowadays everything is made to be thrown away.
Does anyone know what causes throwout bearing rattling
must be lose or worned out
So what is best part number for 2004 Dodge Ram 2500 4x4 with 5.7 hemi?
Part number #junkasstruckgofuckyoyrself
Video doesn't mention an important part flat side of clutch goes towards the flywheel
it is so nice
who makes such a key for tightening bolts
Is called a torque wrench
Super
chinthakunta yadagiri บ
Good
How much is a clutch disc
Clutch job like that would take a week to finish
That's true with the average skill of today's mechanics, but not real specialists.
It only take less than 1 hour to replace a clutch done many times🐃
@@richrich9560 Is it really? I bought my first car which is a 94 Honda Accord and the gears are hard to shift now but I don't know if it's oil or clutch problem.
@@richrich9560 doubt it. try it on a acura TL i dare you
Sir PHC brand clutch kit is good???
5:30 illuminati
drumsaremypassion ช6×667ญช
I've had a pilot bearing on my stage 1 exedy racing clutch go after 5,000 km.
drumsaremypassion oh yeah thats really spooky auto workers everywhere are coming out their closets.
😂😂😂 jackass shut tf up
Clean cotton gloves. I dont have.
Hi EXEDY CAN WE SEE VIDEO FOR 6L80E trans rebuild plzzzzzzz
MOHAAD AHMED
MOHAAD AHMED بظطكحلغهيسرمعغةظكل,و رمىم
Abdellah Haouaz .cerocer nu porneste
Dear sir I am an employee o exedy india.
I do not understand the hysteresis concept in clutch disc.
Will u pl.explain what it is actually & which parts affect on hysteresis loss.
90s has so mutch clutch
exedy made in usa
Rosliana Rose hai
@Rosliana Rose You know about cars?🤔
tabahi
Subok na ng papa ko sa jipny nya
Bàn ép .. lá côn
crap for a mustang fork wobble
When you are to facture into dum and dummer who fit the new clutch who don't check to make and model 9:41
Lol, don't use an impact wrench. Yeah aite...
WTF is a 10576 engine?
suzuki vitara 1.6L
Ecstasy America.
hhh
Far out this crap
brake drum
salam necesiz
শ
You just replaced a clutch on a old unmachined flywheel. Thats when i stopped the video and moved on to the next brand.
There is no need to replace the flywheel unless it's unevenly worn, scratched or heat damaged/warped, as the video described. It's a good idea to replace the rear main seal on the engine to prevent a leak 10,000 miles after a clutch replacement, which would require another new clutch and the $7 seal. It's also a good idea to replace the pilot bearing.