DragonOS FocalX Configuring GR-DECT2 w/ AntSDR E200 (GR 3.10, SDR++, PlutoSDR)

The purpose of this video is to show the small changes needed to run the ANTSDR E200 with GR-DECT2. It's also a reminder that GR-DECT2 is actually included in DragonOS, along with a modified UHD that supports the ANTSDR E200 out of the box. There's no audio decoded in this video. If you're going to run GR-DECT2, make sure you utilize it within the laws of your local country, state, etc. Also, make sure it's your own voice traffic when decoding and receiving audio.
I just figured that while I had a running DECT2 system with multiple channels close by, why not take a look at it in the spectrum with SDR++ and the PlutoSDR? In the video, you'll see that there are at least five different center frequencies that are active, all detected within GR-DECT2. You'll also notice a 'v' when there's voice activity.
If you find this interesting, take a look at some of the videos I've put together in the past, where I run the flow graph against unencrypted DECT monitors. In those cases, the actual audio content is decoded.
As always, If you find this video helpful
Follow @cemaxecuter on Twitter for more DragonOS and SDR info.
Become a patron @ / cemaxecuter

[@jonathanhensley896]

I just got started with rtl sdr. I am so happy i found this channel and dragon OS. You are very knowledgeable. This is the most comprehensive list of resourses for radio hobby

[@cemaxecuter7783]

What a great SDR, you can actually do a lot with it! Super handy.

[@ManuelPinner]

I have a SDR Play RSP DX and a Adalm Pluto SDR for DATV Reception with SDR Angel Software!

[@cemaxecuter7783]

Both great SDRs! Those would probably both work with this if you changed the source input.

[@egnatyuk]

Is it possible to do a frequency mod on AD9363 version of E200 as on Pluto? Or 124 MHz mod as on BladeRF?

[@cemaxecuter7783]

I believe yes on first one and on the second one I’ve seen the dev on X talking about seeing if it’s possible.

[@zerobow9413]

Im konfused the pluto settings say its using IP but you said its working on USB? [what port the OTG or debug]

[@cemaxecuter7783]

I’m away from my Pc but have a Pluto.. I should’ve brought my laptop.. are you trying to setup a flow graph for the Pluto? I’ll try when I’m back next week.

[@zerobow9413]

@@cemaxecuter7783 its the Ant SDR-200 early clone I think its in pluto mode if you dont boot from the SD card

[@cemaxecuter7783]

@zerobow9413 oh gotcha. Yeah there is the PlutoSDR firmware, I never actually used it on the e200. But in that mode it should act just like when I used a usb Ethernet adapter on my real Pluto, iio still found it when using soapy Pluto etc.

[@KarenWasherGrudzien]

WHY ISN'T MY MICROPHONE WORKING I';M TRYING TO CALL MY DAUGHTER MY HUSBAND IS IN THE HOSPITAL WITH STAGE FOUR LUNG CANCER!