MINI Cooper swap out chrome door handle
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Ever wanted to swap out your chrome door handles on your F series MINI Cooper?! So have I!
Sorry this video is a little tough to follow. Leave any questions you have in the comments and I wil try my best to answer them.
www.outmotorin...
www.outmotorin...
Thanks for posting this. I did it today, and your technique made it pretty quick to complete! Great tips!
Glad it helped!
Off the back of this video I purchased a set of handles(and filler cap all for 125 quid ebay) and the whole job took only half hour. Thank you for your time.
Congrats! Thanks for watching!
That is so much easier than replacing a door handle on an R series. Thanks for the don't drop warnings and the rubberband trick.
Glad you enjoyed it
Great video, you do a fantastic job of explaining what to do, and giving tips about what could go wrong. Look forward to the next one!
Thanks for the compliment! I appreciate it!
You are a saint sir. Thank you a 1,000 times for the screw in the door tip. AND THE RUBBER BAND TRICK LIKELY SAVED MY SANITY!!! Thanks again!
Haha saint Nick is already taken. But I'll accept cool guy! Glad I could help!
Did mine today it was pretty easy in the end, not sure why I am watching this afterwards but I used a shoe lace to pull that catch out 😂 nice video.
Haha glad it was entertaining after the fact!
Okay, you convinced me....I am going to have the mechanic at Mini install them for me because I know my screw will be at the bottom or the door! Appreciate the vid.
You are welcome and good luck!!
Using the official instructions I got stuck at stage 2 undoing the bolts, I couldn't see them. Once you showed where they were the rest went smoothly and I'd recommend anyone to watch this video and do this themselves.
Glad I could help Steve! It def was not an easy video to shoot because of those hard to see angles for some of it
Fantastic tutorial, I changed both in less than 15 minutes... Great job! Thank you.
Niiiiiice! Thanks!
Sounds good..... so how did you do both under an hour?
Love the rubber band trick, mine snapped so I used a hair tie which worked great, all an all the install was easy and thank you for the tutelage!
Oh hairband is even better idea! Nice! Way stronger than a rubber band
Great video, thanks for showing. I changed it on my MINI also in black. You show and explain it step by stept, and so I didn`t make a mistake. It looks very nice, and I did it also with the gas cap you expalin.
Awesome! Glad I could help!
Great video. Not as hard as I had imagined. Thanks.
Nope, totally doable.
Great video thanks
Glad you enjoyed it
Thanks for the video! I'm going to get these and install them as well. I thought you might have to remove the interior trim to install them, so this isn't so bad!
Glad I could help persuade you to get some!
Very helpful vid, legit perfect couldn’t figure out how to acc pull it off the car but thank you so much!!
Welcome!
Nice trick ❤
I used cooking twine that is much easier than rubber band.
AH! Good idea! No! Great Idea!
Is there any point in this install where someone could mess up and the manual key/lock mechanism would no longer turn? I just picked up a new F56 I custom ordered, the black handles were port installed, and I went to use the manual key to lock the doors while going for a run at the park, and the key will not turn the lock at all. Interestingly the electronic door lock from the Fob does work though. I’m 2 hours from the MINI dealer, so trying to see if I can resolve this myself.
Hmmmm not that I can think of....but I'm not locksmith expert. I do know the barrels can be stiff to turn with such a little key...?
Thanks for sharing.
Is it possible to remove the chrome piece from the rest of the handle after removing the handle? Also, can I just remove the chrome piece from the handle? You know, just like how it's possible to remove the chrome Gas cap from without removing the actual Gas cap.
I don't think you can successfully disassemble the door handle to remove the chrome but I've never tried....
I'm also curious to know if this is possible. I'd like to remove the chrome bit to wrap it in vinyl!
thanks !!!
You saved my arsch
Cool!
thanks for all your helpful videos. i picked up a used 2017 and noticed one of the door handles led light isn't working. without taking the door handle off, i am able to see in there that the light plug is in fact connected, so i'm hoping it is just a burned out bulb and not an electrical malfunction in the wiring. do you know if by chance you can just replace the bulb in the handles? or do i need to basically buy a whole new door handle?
I think it's a whole door handle replacement if I remember correctly..
@@TheMINIVlog yeah, i figured i would just have to replace the entire handle unit. was just wishful thinking that i could pop in a new bulb at the moment until i moved forward with swapping out all the chrome on my mini which i eventually wanted to do all at once. at least it now gives me an excuse to start with the handles for now (and most likely gas cap). thanks again for all your help!
Good luck!
Thx for the explanation have ordered mine in the Netherlands. Are you als going to do the other door or is that pretty simple
I am not going to post the video of the other door. It's actually easier on the non-driver side since there is no key lock in the way so more room to work in there. I figured if I showed the harder door, then I would not need to show the easier one.
Did you find some way to connect the "keyless entry"...?
Or did you think it’s possible to activate ?
My car does not have this option from factory
No I did not. Without that option I don't think it will work
How do you find out the method of disassemble parts? I'm trying to remove the passenger side dashboard trim cover for vinyl wrap but have absolutely no idea how. Also the OBD port is loose and making a rattling noise listening to music. The mini is a 2018 model.
Just lots and lots of googling and forums and sometimes, just trial and error. I have not found an all inclusive repair manual yet. I feel like you should be able to tighten up the bracket holding in the OBD port....?
👍
Now everyone can now see your finger prints everywhere on your handle. Congrats
Who cares
I wash this car so frequently it doesn't matter
Hi, great video. My four piano black door handles (F55) have arrived. I don’t have comfort access or handle lights is there a chance the wiring is just taped to the inside of the door in preparation for these two options? Cheers, Howard
I looked and did not see it in there. I think it's a separate wiring harness installed during build....... I hope I am wrong but it doesn't appear that way. At least on mine.
Really Nice! can you tell me what size of torx screw did you use ?
It's a 5mm allen bolt rather than a torx. I misspoke in the video
My 2024 2 door S needed a 4mm ball allen hex.
Random off topic question, but I need that snap back Mini hat! Can you share where you found it?
that was on the shopminiusa.com site a while ago. I am not sure if they still have it available anymore or not.
@@TheMINIVlog Thanks for the reply. Dang, looks like they don't sell that one anymore. How much you want for yours 😂?
@@TheMINIVlog Ha, I think you confused this thread with another, as I was referring to the trucker hat :-) Cheers.
Haha you are correct. My bad!
Bummer about the trucker hat! have you checked ebay?
For a wrap is necesary to remove the complete handle?
Not necessary but will make your wrap a lot easier to apply
Can’t you ask someone to use the inside door handle instead of the rubber band thing or wouldn’t it work the same?
Probably would! I didn't have a second set of hands that day
@@TheMINIVlog i’ll try it out tomorrow and let you know, thanks for the great tutorial 🙏🏼🙏🏼
Cool yes! Please do! Good luck!
Pulling the interior lever didn’t help, and I didn’t have access to a strong rubber band so i took out the whole door card, it’s was a frustrating process but handles where wrapped at the end of the day
Man that sounds like a task! Sorry the interior handle didn't work but glad you got it at the end of the day
Where did you find the black handles?? I cant find them
Did you try the two links I put in the video description? Let me know if those don't work for you.
Lol no mention of the size of the Allen screw..🤦♂️
First!
Nice work. I like your dedication
I totally fucked up, even with using this video. Now I need to go to the dealer, and pay a jackpot to get it fixed. This is not a job to do by yourself...
Sorry to hear that. What went wrong with the installation?