I'm glad to hear that :) If you have any more suggestions for effects that are only in AE, please tell me and I'll try my best to recreate them in Davinci.
Ofc, I am here to answer! I don't know the reason but this sometimes happens. Try toggling the blending modes of the fusion clip, then return it to normal. This has always helped me. You can try re-adding the glow effect as well.
After you add on of the transform nodes , just click on the little triangle point right next to the "Center" control ( or the position x / y , depending on what you use ) ! Then go to the frame you want the position to stop and press the triangle point again . That's it !
hello i have 2 questions 1. is davinci just same as after effects but with different controls? i mean like GOJO神 like edits are possible in davinci? 2.can you provide a download for this text preset ?
1 . It's a bit different in terms of using the effects . But it's deeper than that . The controls are quite different and you can use more effects on After Effects in general . That's why I'm doing tutorials on how to make those effects on Davinci ( GOJO edits are possible on Davinci ofc ) . 2 . You can download the nodes in the description , "Nodes from the tutorial" . I don't have a preset bc it's hard to make some of the controls needed :)
Hey great tutorial man! I have one question: How does one make the bevel material smaller (not the extrusion, but the place it takes up on the surface. So basically how do you make the outlines not so thick xD). I have been trying a lot but it wont work 😅
at 1:30 how did u manage for turning around the text ?? for me its just moving the text or with the scroll wheel i can go up and down but not all around like u do
Hey I have problem, when I put two material at 8:38 , the two colors are glitching, I mean it appears like the tutorial in couple of sec then it appears the second material only then appear it normally I tried to remove and put it again it doesn't fixed my pc is strong and I use d.r 18.6 I don't how to fixed
After Glitching does it stay fixed ? This hasn't happened to me so far but I can try to help . Just help me understand a bit more :) I have the nodes in the description anyway , so you can paste them in the Fusion page and compare them to your nodes ...
@@TJBEATSAMV first at all thx for reply, The second material that u did ( blue color ) appears without red edges, then appears with red edge normally then not , I think there is problem in text3d note
Did you check if the color corrector nodes are properly connected and with the right settings ? This is what gives color . Try messing with the render type , lighting and shadows in the Renderer3D node ...
4:47 anyone please help me in my 3d render it does not show open gl render and because of that i am not able to pull out this text effect please help me plss
Hey, ive pasted the nodes into fusion but when i attach the last node to MediaOut1, all the nodes get red text and i still have a grey sceen. what am i doing wrong
its not showing the media it shows the text but not the video behind it please help , i tried reducing its opacity it worked but the text is light now . What to do?
I will try to help as much as I can . Try switching the composite modes of the fusion composition in the edit page and then putting it back to normal . You can also try disabling and enabling it . If this doesn't work , move the comp around a bit and then put it back to its position . Hope one of those help 😅
Here are my nodes : pastebin.com/yNZS2ZxP . You can just copy and paste the text in fusion . There could be many things why this is happening so I can't be sure :/
You can try playing with the angle of the letters ... You can also try using different x , y and z values in the SphereMap nodes or even using an entirely different image !
I would like to , but there is a problem with controlling individual letters in 3D space . After the solution is found I would like to make this macro / preset :)
This can only mean that either you're not connecting Reflect1 to the green input , or you are trying to connect nodes that are not compatible , which means that you might accidentally be using the wrong nodes !
I press ctrl + space on windows and type the node name . If you are just starting out it would be better to watch some other tutorials first , like 'Casey Faris Fusion Page' and some other that will help you understand everything I'm doing better ! In any case I have the nodes free for use in the video's description :)
Might be the Davinci version ... You can try downloading and importing the nodes I use from the description . If it still doesn't work I suppose it's the version !
yo bro the node download u provided i downloaded it an pasted the .setting file in fusion templates abnd when i place it in the fusion node tab it pastes but it doesnt display the text or anything and when i try to open the 3d text or renderer in the left veiw every node just turns red can u please help me . and what do i have t connect to the media out?
This is a basic function in Davinci ... When you right click on a control it should show the option Deinstance . My only guess is it could be a glitch !
Make sure the node is properly connected . After that , you need to check that the preview settings on the top of your screen are the default ones ! Other than that it could be a glitch , in which case I would restart Davinci :)
In this video, I'm showing how to make the characteristic Xenoz/Molob/Zyper style 3D text :)
I know it's your first video but you alredy a legend ❤😂
Thanks 😂
This video actually blew my mind. Idk where I would even begin to crafting this effect on my own. Thank you so much, such a great tutorial!
Thanks fam , it was a tricky effect 🙏
literally no time wasted and straight to the point i usually don't comment on videos but this one is so helpful tysm
I am very happy to hear that !
did you just randomly start making the most WWWWWW video related to amv in davinci . plz keep it up man full suport .
Damn thanks 😂❤
holyyyy man thanks so much for this ive been looking for this and you have helped massively
Glad to hear that fam ❤️🙏
I did it tysm 🧡 this helped so much 🔥😁
Great Job !!!! ✌
Thank you !
underrated quality youtuber
🙏❤
ty so much ❤
Man you're really underrated i dropped a sub
Ayy, let's go 🙏
Amazing! Subbed
Thanks fam , much appreciated :)
You are AWESOME bro tysm!
🙏❤️
Bro you are the goat.
🙏❤
very good content 👍🏼
Ayy thank you 🙏
thanks
w mans
Thanks 🙏🙏
Bro your underated asf
🙏❤
THANKS IT MAKE ME HELP MAKE MY FIRST BEST EDIT
Glad to hear !
this helped a lot.. just if you could tell that how can i increase the spacing bw letters
The spacing can be adjusted in the TEXT3D node , where it says "tracking" !
It is very helpful because there are really few explanations of DaVinci.
I'm glad to hear that :) If you have any more suggestions for effects that are only in AE, please tell me and I'll try my best to recreate them in Davinci.
@@TJBEATSAMV
Really? I would like to see GOJO's CC reproduced.
Example
th-cam.com/video/T5AteQ8dzqk/w-d-xo.htmlsi=BcDvxgoM60hSezrD
@@TJBEATSAMV BRO can you make effects like 6ft3 tutorial please
@@iIPRGAMER I have a video on 6ft3 transitions that should've dropped on Sunday, but there were some issues . I will drop it as soon as possible !
@@TJBEATSAMV ok bro
Você usa o Davinci Resolve gratuito?
I have another thing, every time I add glow or soft glow the thing becomes see through? (sorry, I'm asking a lot of questions)
Ofc, I am here to answer! I don't know the reason but this sometimes happens. Try toggling the blending modes of the fusion clip, then return it to normal. This has always helped me. You can try re-adding the glow effect as well.
hey how do i downlaod the nodes into my softwarre and edit to my name ? i cant seem to figure it out
Can you make a preset for this animation I am having trouble animating it myself
hey man can you please tell me how to set a keyframe for the positions in fusion comp?
After you add on of the transform nodes , just click on the little triangle point right next to the "Center" control ( or the position x / y , depending on what you use ) ! Then go to the frame you want the position to stop and press the triangle point again . That's it !
hello i have 2 questions
1. is davinci just same as after effects but with different controls? i mean like GOJO神 like edits are possible in davinci?
2.can you provide a download for this text preset ?
Please tell btw how the absolute f did u find how to make xenoz text its so complicated W MY BRO
1 . It's a bit different in terms of using the effects . But it's deeper than that . The controls are quite different and you can use more effects on After Effects in general . That's why I'm doing tutorials on how to make those effects on Davinci ( GOJO edits are possible on Davinci ofc ) . 2 . You can download the nodes in the description , "Nodes from the tutorial" . I don't have a preset bc it's hard to make some of the controls needed :)
Bro i hate you SIKE do more tutorials so i can be the next Xenoz XD
And respect to my man for writing the whole thing
Bro from where did u learn these all?
Hey great tutorial man! I have one question: How does one make the bevel material smaller (not the extrusion, but the place it takes up on the surface. So basically how do you make the outlines not so thick xD). I have been trying a lot but it wont work 😅
At 4:00 you should move the two top points in the graph lower vertically . This way you can control how much thinner the outline is !
@@TJBEATSAMV tysm man! This tutorial helped me out a ton :D keep it up!
@@turtle.eltrut Glad to hear that :)
sir can i ask somtehing? why the choice is not shown, when i want to connect the text at 8.58 ?, anyway great video new subs here😁
ahhh i get it now, it need to be active styled on the other text, so it will show the "styledtext" choice when connecting
you should put a link for the image you used because i cannot find it
Sure! Here you are: drive.google.com/file/d/1o-utm3_XQahxgSfTuLimtEr9XNmcYc3i/view?usp=sharing
Sorry, I meant the reflection map 😅😅@@TJBEATSAMV
@@Kcreed389 No problem ! Here you go www.deviantart.com/pumpkinman68/art/Complex-roof-lights-805284339
at 1:30 how did u manage for turning around the text ?? for me its just moving the text or with the scroll wheel i can go up and down but not all around like u do
samer
Hey I have problem, when I put two material at 8:38 , the two colors are glitching, I mean it appears like the tutorial in couple of sec then it appears the second material only then appear it normally I tried to remove and put it again it doesn't fixed my pc is strong and I use d.r 18.6 I don't how to fixed
After Glitching does it stay fixed ? This hasn't happened to me so far but I can try to help . Just help me understand a bit more :) I have the nodes in the description anyway , so you can paste them in the Fusion page and compare them to your nodes ...
@@TJBEATSAMV first at all thx for reply,
The second material that u did ( blue color ) appears without red edges, then appears with red edge normally then not ,
I think there is problem in text3d note
Can you do 3d text like Gojo pls^^
Sure! I have created the next three tutorials to upload. After that I'll do gojo :)
@@TJBEATSAMV ty mate i'll w8
Why dont I get both colours on my text but the second one...😢and when I drag the renderer node in,,, it is colourless
Did you check if the color corrector nodes are properly connected and with the right settings ? This is what gives color . Try messing with the render type , lighting and shadows in the Renderer3D node ...
@@TJBEATSAMV ok
4:47 anyone please help me in my 3d render it does not show open gl render and because of that i am not able to pull out this text effect please help me plss
Bro I moved the text to master bin but I can't use this text another time like other files for example shakes and wraps
I think this might be because of the media .
Fusion composition can't be used in master bin
Hey, ive pasted the nodes into fusion but when i attach the last node to MediaOut1, all the nodes get red text and i still have a grey sceen. what am i doing wrong
You're not connecting the media:)
its not showing the media it shows the text but not the video behind it please help , i tried reducing its opacity it worked but the text is light now . What to do?
I will try to help as much as I can . Try switching the composite modes of the fusion composition in the edit page and then putting it back to normal . You can also try disabling and enabling it . If this doesn't work , move the comp around a bit and then put it back to its position . Hope one of those help 😅
@@TJBEATSAMV it worked when i changed it to add
i just realized when i copy and past, it doesn't show instant text?
nevermind :)
i cant find the reflection map
The bevel material did not show up?
You should uncheck the 'use one material' option in the shading tab of the 3D text node.
Bro I don't have the "open gl render " in render type of 3d render note
What version of Davinci are you using ?
for me da background in fusion is transparent but when i go to any other tab thingy its just a black background pls help
I'm sorry for the late reply :/ Do you mean that after you put the fusion comp over a clip it's just a black background and the 3D text?
Bro my text us not rotating as in your even after i added a text3D node it is only going up down left right front and back
Please help!
Here are my nodes : pastebin.com/yNZS2ZxP . You can just copy and paste the text in fusion . There could be many things why this is happening so I can't be sure :/
10:33 ok so over here i cant seem to keyframe even tho i double clicked the values so what do i have to do
nvm found it
@@xiersome. Ok good :)
for me the letters are white and too shiny how do I fix that (during render part)
You can try playing with the angle of the letters ... You can also try using different x , y and z values in the SphereMap nodes or even using an entirely different image !
hey great tutorial! but is it possible that you could make a preset of this? it would really help me out
I would like to , but there is a problem with controlling individual letters in 3D space . After the solution is found I would like to make this macro / preset :)
this doesn't work at all for some reason it's red and it even try working
also how do i drag the screen and move it like u do
By pressing the scroll wheel button :)
I made all of it correctly, but my text made the video slower and longer than it should, so all the other clips weren't seen
Maybe it's a lag . In any case I have the nodes available for downloading in the description !
My reflect1 node cant connect to the replace material one
This can only mean that either you're not connecting Reflect1 to the green input , or you are trying to connect nodes that are not compatible , which means that you might accidentally be using the wrong nodes !
LETS GET HIM TO 1K SUBS CMON GUYS WE NEED TO GET HIM SOME MONEY!!
We made it 😂❤
@@TJBEATSAMV I believed in your growth. CONGRATULATIONS!!! :P
@@n1ghtmare.17 Thanks 🙏💯
@@TJBEATSAMV mwah
this is so hard im so confused pls help idk how to make the node appear like how u type them and then how do I get opengl renderer :C
I press ctrl + space on windows and type the node name . If you are just starting out it would be better to watch some other tutorials first , like 'Casey Faris Fusion Page' and some other that will help you understand everything I'm doing better ! In any case I have the nodes free for use in the video's description :)
@@TJBEATSAMV tysm i did it and it looks amazing ur a life saver :D
@@rxplays14 I'm glad it helped !
@@TJBEATSAMV how do i import the nodes into davinci after downloading them?
how can I quicksearch like the 3d tect node im the beginning?
Control + Space bar
my render options arent the same as yoursÉ any reason why
Might be the Davinci version ... You can try downloading and importing the nodes I use from the description . If it still doesn't work I suppose it's the version !
i dont know why but its only showing a white screen
i got it but do you know the name of your reflection map
@@Kcreed389 I don't remember the initial name :/ I changed it after I had downloaded it .
ITS GOOD I GOT IT WORKING THANKS THO!@@TJBEATSAMV
yo bro the node download u provided i downloaded it an pasted the .setting file in fusion templates abnd when i place it in the fusion node tab it pastes but it doesnt display the text or anything and when i try to open the 3d text or renderer in the left veiw every node just turns red can u please help me . and what do i have t connect to the media out?
Yes , that's because you haven't replaced the media node with the picture I showed in the tutorial .
@@TJBEATSAMV its still not working
Are you sure you're doing it the right way ? I can't think of anything else , it should work just fine ...
my text lags when it is played
You should enable the render cache :)
@@TJBEATSAMV ok
Bro davinci resolve in strong hands like this is better ae
2:03 I cant find deinstance
This is a basic function in Davinci ... When you right click on a control it should show the option Deinstance . My only guess is it could be a glitch !
Which version u use Free or Paid
Free version :)
@@TJBEATSAMV 16 ,17 or 18
18.1.2, it's written in the description as well :)
hey when i drag the renderer3d on to the screen its just gray the checkers are not showing up what should i do?
Make sure the node is properly connected . After that , you need to check that the preview settings on the top of your screen are the default ones ! Other than that it could be a glitch , in which case I would restart Davinci :)
Omg this is difficult for me 🥲 I don’t how to use it
When I try and import the reflection map to fusion page it’s very pixelated, can you help me?
Try downloading this one: www.deviantart.com/pumpkinman68/art/Complex-roof-lights-805284339 ! If the problem remains I'll try to find a solution !
@@TJBEATSAMV thank you
@@PuppyDogTV9949 You're welcome :)