That is the new Haas pneumatic vise. It will be released for sale in the near future initially in a 100mm size, but likely others will follow. Check HaasTooling.com or HaasCNC.com in the next few weeks It is also compatible with Non-Haas machines assuming you can plumb air to it and add a manual open/close switch
Daniel and Andriejus, astute observations! Some people hate the background music, some people love it. And luckily some people notice that we are actually trying to moderate how we use it. Matching but not overpowering the natural sounds of machining. Thanks for noticing!
Look at the boss by the through hole at 3:55 where they crashed an endmill into it.. This is the second time recently I have seen a screwed up part used as a marketing example by Haas. That's a $30 piece of material lost to redo this, but they used it anyway? For what they charge It makes me nervous on my next purchase.
Very Good. Makes me think i should own one. Definitely makes life a little easier. The only part that was not so good ? Was the coolant supply ?? It looked like someone was pissing on the part. ( or Maybe they were, LOL ) Loved the video. Thanks for posting.
I closed the coolant valve 90% and was also manually turning it on and off to provide a minimum amount of coolant so the cutter would not load. If we blasted it with full flow coolant you cant see anything and that's boring to watch. So the normal coolant flow is more than 10x what you see. It was only reduced for filming
@@marcusimes75 Hey Marcus. Makes more sense when you know the whole story. I understand the dramas of filming with coolant, lol. It was just something i commented on at the time. Like most comments people make. They make them at the time, later even forgotten why they mentioned it ???? Thanks for your reply. Peter.
We purchased one. But I have no idea how to start programming this thing. Do I need separate post proc or a simple setting? The guys from Haas arent really helpful. I am using SolidCam. Thanks.
MrTskull99 - Contact me at bofallon@haascnc.com so I can get somebody to help you out. Please let me know where you are located as well. Thanks - Bryan at Haas Automation
What software was used for these tool paths. I would like to get some info if these were Mastercam tool paths. Look more like other software tool paths though. I might be wrong
Very nice, but the TRT210 page at Haascnc.com is almost empty...no price, not much information...sad to release the advertisement before support website is fully operational.
Florian, What region are you viewing from? The TRT210 is released for August deliveries at $33995 in the US and Canada only at this point. The price, info, and Build&Price are fully visible for these regions. We should have an approximate release date for International orders shortly.
@@haasautomation Hi @Haas Automation, Inc, I'm looking from Europe, France to be exact ;) Anyway thank you for your answer. Can you send me in private if you prefer an email adress to report the broken links I can find on your website please ?
That is the new Haas pneumatic vise. It will be released for sale in the near future. It is also compatible with Non-Haas machines assuming you can plumb air to it and add a manual open/close switch
At first seeing that part get made it made me think "oh think of all the cool parts we could make if we had 5-axis someday!" but by the end I was looking at it and going "it saved a few setups but I could totally make that on a basic 3-axis..." Why not show a part that really takes full advantage of 5-axis? That said, can't wait to make some parts like that on the 3-axis VF2 😋
Станок можно использовать в метрических или британских единицах измерения, не зная, что вы подразумеваете под «оборотами шпинделя в мм». [Перевод Google, извините, если это не хорошо]
I really don't understand what the point of a single shear 5th axis setup like this is, just add a small support on the end and make it a double shear trunnion.
Rolltech Innovation manufactures machine coolant saver. Serious threats to productivity and health are bacteria and fungi which are commonly found in industrial coolants. This coolant bacteria filter has some advantageous features include: last a life time, with guarantee of extended life of coolant with bacteria filter - no consumables, no electricity, no chemical dosing, etc. It is a one time investment, ROI within 4-6 Months, Saves on input of fresh oil and disposal cost like etp treatment, or giving it to authorised recycler. These mineral oil based coolant are prone to generation of bacteria which produces foul odour, often from hydrogen sulfide [rotten egg smell]. Rolltech Innovation "Aqualogic" filter is an innovative and economical method of continuously controlling these micro organisms and the odour they generate. "Aqualogic" bacteria coolant filter consists of series of high-purity multi-metal fibres cased within a stainless steel tube. the dissimilar ions in the multimetal alloy bed undergo a natural electrochemical reaction, also known as an oxidation-reduction reaction. Which Kills the all the Microbial activity in the coolant 24/7 call us at +91-702-723-6191 or write to us at rolltechin(at)gmail.com Enjoy the coolant being running without changing it, just keep the coolant healthy ## like and subscribe,that would give us motivation
Love the 5 axis deburr paths!
That 210 is cool but we want more info on the air vise!!!!
That is the new Haas pneumatic vise. It will be released for sale in the near future initially in a 100mm size, but likely others will follow. Check HaasTooling.com or HaasCNC.com in the next few weeks
It is also compatible with Non-Haas machines assuming you can plumb air to it and add a manual open/close switch
I love the 80s music I was dying to see Johnny 5 pop out from the back room.
The background music was really good👍
Could it have started as a smaller piece?
very Nice - especially the Ball mill 5 axis deburr
Did you guys choose the background music to match the rpm of the toolbits? Most cuts are in tune with the music :-)
I've noticed it in previous videos, posted about it but nobody replied :D I am not the only one :D
Daniel and Andriejus, astute observations! Some people hate the background music, some people love it. And luckily some people notice that we are actually trying to moderate how we use it. Matching but not overpowering the natural sounds of machining. Thanks for noticing!
That looks like a pretty solid finish, considering the lack of hours and hours of 1/8" ball mill 5-axis paths.
I can't wait for mine to arrive!
Thanks for this video!👍🇩🇪
Look at the boss by the through hole at 3:55 where they crashed an endmill into it.. This is the second time recently I have seen a screwed up part used as a marketing example by Haas. That's a $30 piece of material lost to redo this, but they used it anyway? For what they charge It makes me nervous on my next purchase.
Look like chips?
Since when does YT allow pornographic content?
Is there an easy way to remove the dovetail behind later? I’d assume youl ll be needing a custom fixture to clamp down a 5 axis machined part
With judicious saw work you could cut you material & run time in half.
How do you remove that dovetail from the part?
What coolant is used in this demo?
Very Good.
Makes me think i should own one.
Definitely makes life a little easier.
The only part that was not so good ?
Was the coolant supply ??
It looked like someone was pissing on the part.
( or Maybe they were, LOL )
Loved the video.
Thanks for posting.
I closed the coolant valve 90% and was also manually turning it on and off to provide a minimum amount of coolant so the cutter would not load. If we blasted it with full flow coolant you cant see anything and that's boring to watch. So the normal coolant flow is more than 10x what you see. It was only reduced for filming
@@marcusimes75
Hey Marcus.
Makes more sense when you know the whole story.
I understand the dramas of filming with coolant, lol.
It was just something i commented on at the time.
Like most comments people make.
They make them at the time, later even forgotten why they mentioned it ????
Thanks for your reply. Peter.
We purchased one. But I have no idea how to start programming this
thing. Do I need separate post proc or a simple setting? The guys from
Haas arent really helpful. I am using SolidCam. Thanks.
MrTskull99 - Contact me at bofallon@haascnc.com so I can get somebody to help you out. Please let me know where you are located as well. Thanks - Bryan at Haas Automation
Wow the great machining
What kind of music is playing in this video?
Op 00, is that pneumatic clamping passive or active?
The Pneumatic workholding can be clamped/unclamped by M-code, foot pedal, or on the Devices tab on the control
What software was used for these tool paths. I would like to get some info if these were Mastercam tool paths. Look more like other software tool paths though. I might be wrong
Hi Corrie, I programmed this part with Autodesk Fusion 360
@@marcusimes75 nice work!
That would make an AR15 lower receiver nicely.
Very nice, but the TRT210 page at Haascnc.com is almost empty...no price, not much information...sad to release the advertisement before support website is fully operational.
Florian, What region are you viewing from? The TRT210 is released for August deliveries at $33995 in the US and Canada only at this point. The price, info, and Build&Price are fully visible for these regions. We should have an approximate release date for International orders shortly.
@@haasautomation Hi @Haas Automation, Inc,
I'm looking from Europe, France to be exact ;) Anyway thank you for your answer.
Can you send me in private if you prefer an email adress to report the broken links I can find on your website please ?
Florian TOSCANI it isn’t available to the European market yet.
@@yianni3251 yep, I got this 😉
Song name pls?
Who makes that pneumatic vise
That is the new Haas pneumatic vise. It will be released for sale in the near future. It is also compatible with Non-Haas machines assuming you can plumb air to it and add a manual open/close switch
if i get rich one day i will buy a killer cnc machine like this pure for hobby purpose
Why all the demos of Haas are in aluminum?
th-cam.com/video/JFvEecvslX8/w-d-xo.html
feeds speeds rpm 3 flute end mill
At first seeing that part get made it made me think "oh think of all the cool parts we could make if we had 5-axis someday!" but by the end I was looking at it and going "it saved a few setups but I could totally make that on a basic 3-axis..."
Why not show a part that really takes full advantage of 5-axis?
That said, can't wait to make some parts like that on the 3-axis VF2 😋
Even "3 axis" parts are usually so much nicer to do on 5 axis machine. In ideal case you get the work done in one setup
3:54 you can see a misshap with the ball endmill that cut into the small crossing hole.
Bad Haas, bad.
Good catch...
А можете еще писать подачу в мм и обороты шпинделя в мм ?! а так все шикарно
Ото красиво но непозновательно!)
Станок можно использовать в метрических или британских единицах измерения, не зная, что вы подразумеваете под «оборотами шпинделя в мм».
[Перевод Google, извините, если это не хорошо]
David B да мне бы хоть какие та цифры можно даже и режим резаниям. Я имел виду сколько “ S “ и * F * если чпу знаешь то расписывать и не стоит
I really don't understand what the point of a single shear 5th axis setup like this is, just add a small support on the end and make it a double shear trunnion.
Footprint...Table space.
I wish all we cut was Aluminium
This is unreal.
Am I really on the pornhub so early in the morning?
Больше половины заготовки в стружку переработали.
I wish they wouldn't add the irritating music. I just want to hear the machine and cutters.
Cutting so slow with the 1/2 end mill I couldn't finish watching. crank it up to 500 ipm at least. I cut 780 IPM on my Brother this morning.
🇧🇷Daniel Machado - Brazil🌍🇱🇷
Rolltech Innovation manufactures machine coolant saver. Serious threats to productivity and health are bacteria and fungi which are commonly found in industrial coolants. This coolant bacteria filter has some advantageous features include: last a life time, with guarantee of extended life of coolant with bacteria filter - no consumables, no electricity, no chemical dosing, etc.
It is a one time investment, ROI within 4-6 Months, Saves on input of fresh oil and disposal cost like etp treatment, or giving it to authorised recycler.
These mineral oil based coolant are prone to generation of bacteria which produces foul odour, often from hydrogen sulfide [rotten egg smell].
Rolltech Innovation "Aqualogic" filter is an innovative and economical method of continuously controlling these micro organisms and the odour they generate. "Aqualogic" bacteria coolant filter consists of series of high-purity multi-metal fibres cased within a stainless steel tube. the dissimilar ions in the multimetal alloy bed undergo a natural electrochemical reaction, also known as an oxidation-reduction reaction. Which Kills the all the Microbial activity in the coolant 24/7
call us at +91-702-723-6191 or write to us at rolltechin(at)gmail.com
Enjoy the coolant being running without changing it, just keep the coolant healthy ## like and subscribe,that would give us motivation
It only broke down twice during the filming of this video.
omg next time please don't play music I want to hear the cutting
Why the horrible music?
I liked it over a lot of background music actually 😂
Most unreliable company
I'll never do business with them again.
Chatter everywhere...typical
Pay more.....get Bridgeport