How to: Prep and Paint an Engine with Aerosol Spray Cans
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This week I'm showing how to prep, prime, and paint the 20R engine of this 1980 Toyota, right here in my residential garage, using aerosol paints.
The 2k Engine Paint is from erapaints.com/
Other products used:
Battery Terminal Cleaning Brush: amzn.to/4b4zT2O
Engine Primer: amzn.to/4dc5MIv
Self Etching Primer: amzn.to/3PWJ0KQ
Grease & Wax Remover: amzn.to/4aygO9h
Tack Cloths: amzn.to/3TUADR5
Masking paper 18": amzn.to/3TXGvZX
(I earn a small amount on each product purchased through an affiliate link - Thank you for helping support this channel!)
19002FLT FlowTech Stainless Header: ebay.us/HVkJGe (As an eBay Partner, I may be compensated if you make a purchase)
LCE Header Studs: www.lceperform...
Laser Cleaning Machine: • Everything to know abo...
More Complete Guide How-to Paint Videos:
How to Prep, Prime & Paint an Engine Bay: • How to Prep, Prime & P...
How to: Prep and Paint a Rusty Frame: • How to: Prepare and Pa...
How to paint an Exhaust: • Best High Heat Spray P...
How to Paint Wheels: • How to: Complete Wheel...
How to paint automotive panels in a garage: • How to: Spray Automoti...
How to paint Calipers & Rotors: • How to: Paint Calipers...
How to Fix & Paint scratched plastic bumper: • How to Repair & Paint ...
How to paint color-matched fender: • How to Paint a Vehicle...
I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: 6thgeargarage.c...
Instagram: 6th_gear
6thGearGarage
6th beer garage is becoming one of my favorite channels. 👍
That laser cleaner... still drives me wild with jealousy! That must be a HUGE time saver.
Но цена пока еще великовата. Моя жена не пойдёт на такое😂😂 даже если я ей разрешу чистить им посуду😅
It saves so much time and allows me to easily clean detailed parts that I wouldn't even consider cleaning before. I saved up for a new computer but bought the laser cleaner instead. So it still takes forever to edit on this 11 year old computer but time saved in the garage is worth it!
Priorities 😂🎉
Holy cow that laser cleaner is unbelievable if I done a lot of engines I would definitely have one of those
That laser cleaning machine awesome and a time saver . Wish I could afford one. I could start a small cleaning shop for small parts!
I've considered doing the same for small engine parts that couldn't be sand blasted. It could be some extra income to help pay for the machine.
You are an inspiration for my project. She’s an unmolested 1981 (square headlight) 4x4 Toyota long bed which I have been acquiring parts for. I so desperately want to drive the hell out of it, but she’s been parked since 1990, so she’s going to get a thorough makeover before I drive it.
The good news is that these old toyotas still run great after sitting. Just go through the fluids and fuel system first. Spray some WD into each cyl and let it sit for a bit before turning it over . (crank it w/o plugs to lubricate internals first)
That project is coming along nicely!
That laser is so cool to watch in action… brings back some awesome memories of my Toyota pickup days. Wish I would have never got rid of mine 84 xtra cab 4x4.. ☹️ but I like your shop truck built.. keep up the great job..
Thanks, this has been a longer than expected project, but it''s going to be running soon and I can get started on the next one - 1985 4Runner
The progress and process is SO appreciated! Thanks for the content
You are welcome!
Came out beautiful!!! Great video!
Thanks, hope to have it on the road for summer
Fantastic work, very professional, esp for a home job. Love watching it very much, I feel very grateful for this project and your whole channel, thanks for sharing with us!
Thank you very much!
look nto an inflatable paint booth. loving mine.
When it comes time to paint my next vehicle, I will definitely try it out.
Enjoying the journey, just sayin from north of Newcastle 🇬🇧🇬🇧🚗👍👍🍺
That is a night and day difference on the engine, wow.
If you ever do a 'laser cleaner' giveaway event, lmk!
Looks amazing dude, well done!
Thank you!
👍👍👍👍👍 it looks great but you gotta go back and paint the oil plant lol awesome I hope you had a great memorial weekend. oh and by the way, I’m a new subscriber and your first video was you talking about the laser machine and you were definitely not part of the debate team in your school because you sounded like a robot lol.
Thanks for watching! 👍 I decided I'll leave it red, just because I don't want to take it back off again. (I change my own oil so I should be the only one who ever sees it :)
I'm so excited about this build, can't wait to see the pickup run.
I love those fine details (as well as doing them).
Thanks! It's getting close...
That looks soooo good.
Thanks! I'm excited to see it in the engine bay
Im going to give this era paint a try. Hopefully I get great results
I only have good things to say about it!
Engine looks GREAT! Not a fan of using white on any engine. Love the headers. I was thinking too bad Corolla headers wouldn't fit & u came up with better. Looking forward to completion
👍🇺🇸
Looking good.
Thanks 👍
AMAZINGNES!!!
Great video
You are getting great use out of that laser cleaner, what an amazing tool. So I guess it is the heat from the laser that is doing the work, not some sort of electrical, chemical reaction, is that correct? Actually, Im not sure I have that right, idk how heat would remove rust. Just made me wonder when I saw you use it on the alternator.
Actually there are two types of machines. Continuous Wave uses heat. Mine is a pulsed machine that uses pulses instead of heat. More about the two types here: th-cam.com/video/rQxZAFO8vx4/w-d-xo.html around the 2:10 mark.
My next birthday investment 😁
@@jessestumbo7275 It's so worth it... I'm able to get so much more accomplished with this machine.
I looks great
Thank you!
Man now I want to do the same to my truck. Question. Which is that mountain bike hanging in the back ground I'm curious lol?
It's an old Fastrack that I've had for about 20 years now. I've thought about upgrading, but I've taken good care of it and it's still treating me well! Here's a closer look at it: th-cam.com/video/-7crLpPBceE/w-d-xo.html (and yes that repair is still holding up!)
@@6thGearGarage that is awesome. I have a Cannondale super V kind of same style. That's why I asked. Cool bikes.
6:11 is that an original Toyota 22R engine? Im not familiar with the markings on the block there. Maybe its just an older engine than Im used to.
This is a 20R. I had a temporary valve cover on it from a 22R while I was painting the original Valve cover. As far as I know, this is the original engine for the truck.
You are running the Weber with a fuel regulator???? OEM fuel pump is 7psi, Webers only need 2.5 to 4 psi...any more and they flood and run really rich....wipe your rings out.......Will that laser clean carbon off piston tops and ring groves??? Sure works on that engine....
Yes it has a regulator, I didn't have it back on the engine yet at the end of the video. The laser does a great job at cleaning pistons. I have some before/during/after video footage that I'll put together.
great work, .....but I have a hard time justifying going to that much work and not at least throwing on some new rings and bearings, dingle hone the cyninders? I mean you were so close already.
Aside from the leaking front seal, the engine was in excellent shape... the best part of the truck.
I hope that oven is a dedicated curing oven and not really the one you use for food... Using an oven to bake paint or powder coating then making your food in it is extremely dangerous as the paints are toxic.
I've only heard that about powder coating. Because the paint is already completely dry, it only makes the kitchen smell a little (I opened up the house)
Is that the engine out of my truck?
I've bought a lot of toyota trucks from a lot of people over the years... who's this? This engine was out of the blue 1980.
Overdone and beautiful!
OMG...did no one else cringe and scream Asbestos?
They used to use it on brake pads and clutches back in the day... the engine block itself doesn't have asbestos in it.
22R on the valve cover, 20R on the block and Ford blue....Is it an Ohio thing? To much salt?? LOL
The engine is a 20R. I had a temporary valve cover on it from a 22R while I was painting the original Valve cover. Yeah, Ford was the only blue... a little lighter than the exterior of the truck. Always too much salt lol.
Video not practical not everyone can afford a laser to clean parts with need to talk a little more about home school cleaning
Exactly, that’s what the wire wheels and brushes were for.
if only there were numerous other ways to clean parts like chemicals or wire wheels or sandblasters or sandpaper. come on man, lets think a little and use common sense