Banshee swapped Grom First Ride!
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- I Drive my banshee swapped Honda Grom for the first time !
Follow on Instagram: / vasilybuilds
00:00 intro
For all inquires email me vasily1fab[at]gmail.com
Want to contribute financially?
/ vasilycustombuilds
🎵 Music used from www.epidemicso...
🎣Install Fishing Clash app for free on your iOS/Android device: fishingclash.link/VasilyBuilds and take part in the Halloween event 🎃
Use my gift code VASILYBUILDS to get a special $20 value reward! (available for new players only)
letssssss gooooo
How is this game relevant for your channel..? Why not insurance.? We know you have needed good insurance.. or what about tools, something to clean and organize your workshop.. or a sponsorship to a contractor who could build you a new one.. but seriously why a fishing game..?
@@DenRoedeMogM because he has to pay the bills 😂
@@ebgarage I know.. but the fish game are doing the opposite.. :-)
@@DenRoedeMogM I guess it depends they still pay him even if they don’t get anyone to join but if no one joins they just down sponsee him again
If your ever want to sell this… slide into our dms
This is definitely something that would fit right at home amongst your collection of vehicles.
You guys are so awesome glad to see you here been following you since I lived in Canada like 4:00 or 5 years ago and now you are super huge also been following this guy pretty much since day one
I know good people when I see them
You might not recognize my handle but I've been commenting on the channel for years I always switch my name though so it's hard to keep track of me LOL
@@jonathanporter5223 they just posted a grom video like yesterday! Apparently it's a trending bike rn. I have a 2022 grom with tons of mods
No way !😮
@@Partnerthedog same
Don't look at the TH-cam welding, it'll burn your eyes! LOL 🤣🤣
Cut and re-weld front fork yoke a few degrees.
Your welding skills have gotten pretty amazing!
Thanks! Always room to improve
They probably could not handle the pornography beads
He should go get a job at NASA he is so amazing with his welds ..lol
they better be good welds if its sometimes like this
Let your tungsten rod that is in torch, go in, and not so far out, you wil weld better on the aluminum, it wil not melt it so fast, then you wil get n more better run of welding
Nothing you do on a vehicle ever takes as quick as you think it’s going to your first time
Every a thing accept from your mother hahah sorry for the bad english im no from us
@@colbycramer1214 love the “your mom” joke. Very American of you, lol
@@colbycramer1214 hahaha 😂 so muts funni 😂😊
Yeah that's a damn fact!
Amen. Took me 4 hours to change my tires today. I truth I had to take the rear for air only cause my compressor wasn't strong enough to seat the bead and that was an hour.
The gas can as an arm rest while TIG welding! what a legend, definitely not OSH approved but also, realistically not that dangerous. love the homebrew construction and owning your mistakes, mistakes are only mistakes if you don't learn from them! another pie cut or two and you'd have that exhaust clear well enough without ruining the flow.
Haha 😂
A think it was a tig bottle transport lid I'd be very surprised if that blew up.
@@aroncharlwood1777 It was a gallon tin of Acetone, pretty flammable. But equally a lot safer than some of the self appointed safety police would believe, as long as the lid is on 🤙🏻
@@MurphCraft I stand corrected sir
You don’t need that
U finally got my attention bro. Banshee swaps are awesome and you pay attention to detail and that’s classy and prove you are very passionate about ur work. All the good guys stick together and this is very interesting to watch. Keep up doin what u do! It’s WORKING driving u to the top of the charts
I love that you actually make your own stuff. So many you-tubers just buy their stuff. Big deal. Let's see them succeed by fabricating their own stuff. Great job!!
You did it again! Another Sickly overpowered 2 stroke build! Sounds decent like your expansion chamber worked out allright. Keep on riding!
I can’t believe you were able to graph that motor into that bike. Really cool😄👍 Sounds fast and looks good 👌🙂
Nice work Vasily! It’s definitely a small frame to fit that twin into, I like your carb extensions you welded on, good way to get them to clear the frame.
I liked how you called out some of the dumb stuff people say in the comments 😂
Haha. Thanks Mike 🙏🏼
I’ve been welding all processes for many years. Thank you for not blocking it out. I love your builds !
Your a creater which is another word for artist. So it doesn't matter what others think. Your vision your creation. Keep doing you it's why we watch.
bahahahhaha he's wielding resting his arm on a can of acetone. beautiful
We all make mistakes brother. We learn from them and then we find a workaround. Thank you for including that in the video, as I was not aware that aluminum burn was possible. The build is badass, and I'm looking forward to the next video man.
You are a 1 man fabrication team.
Outstanding troubleshooting.
Not them wanting to block out wanting you to block out the welding 🤣
Great! At least the spinning keeps the front end down 😂😜
0:35 “the perfect streetability daily driver capability”- said the man building a death trap
Alot of things aren't perfect but you are out here doing it buddy. Hell of a job.
Bro why are people complaining about welding blindness on TH-cam 🤦
Great video as always and that bike is beautiful!
Reminds me of my buddy swapping a 250 2 stroke dirt bike motor in his YSR50.Verry sketchy.And scarry fast!!!! Totally Ausome!!
The casting of that radiator looks gnarly, but you did a pretty good job there. Keep it up, younger bro-ski!
Love how you added the Acetone can to prop on while you were welding. 😁 I see what you are doing here. Good job.
1:40 i'm sitting here talking to myself like omg how is he just gunna shove a bolt and engine mount to the frame without a bushing!?@#!@?#
and then i was immediately like cheering to myself in my office lol
for the wheel clearance, you can do something that wont impede flow: squish the tube. the flow wont change if it's running in an oval pipe.
you can also rebuild the 2 in 1 header with more downwards angle...
or run the 2 in 1 lower down, since the expansion only begins below the engine.
finally you have an inch of clearance behind and half one above the engine, so you can shift the whole engine, backwards and point the engine downwards at the same time.
doing most of the above should get you 2 inches of clearance at least.
or make some blocks to raise the fork. making this thing a little bit more stable wont be too bad.
Love the build, I love your desire and determination. Keep the two strokes alive!
I always wondered if a turbo 2-stroke could be made to work. If so, you could probably get 200hp out of a 350 Banshee engine lol.
Blew a hole in my groms case a couple weeks ago and now you got my head turning. Might do something similar, keep up the great work! love seeing the builds!
Maybe you could cut the frame at the head tube and move it 1in to 1/2in out for pipe clearance and tuck the pipe up under the motor a little more for ground clearance but this thing is absolutely awesome 🔥🔥🔥
Oval exhaust piping my man. The volume and flow is identical to circular piping, and perfect for your clearance issue!
Having to explain to people that they won't get flash burn thru a pc/phone/tv screen =priceless! GOOD job bud bike looks sweet.
This beast gotta have the best power to weight ratio in the game.
Bravo Vasily《☆》Wow👍🔥A lot of obstacles but you got a runner⛾🍕I can't wait to see it hook up on dry pavement🖖😎☮
Bro stepping up his game!!! I’m digging the content. Dude really thought you could get flash burn from watching a video😂😂😂
Be careful Vasily, any decent pump to those front forks and you're gonna jam that front tire into the rad and exhaust.
When cutting aluminium with an abrasive disc try to use bar soap. Cut into it a little bit with your disc every now and then and you'll see the difference in performance.
your skills are amazing for someone so young. Mate you have a very bright future ahead of you... 😎👍
This is an epic build and I can't wait to see more episodes about it..... Thank you and keep up the great work. 😁👍
The perfect factory bike once the kinks are straightened out ! Honda should take note of this and the rest of the manufacturers.
God the sound of a banshee coming to life is just about as good as it gets
Great project! The commenter is wearing a welding helmet to watch your channel. Rookie.😉
Ahhhh, my eyes. The welding and blinding light! Lol
This has to be the funnest grom ever.
Wait 2 into one exhaust doesn't work on a two stroke. You need backpressure from the exhaust for the full potential of your engine. That's why Banshee's have two separate pipes.
Can’t tell you how much I appreciate your videos. Be careful and keep it up. You are going far in this world
Yeah.. you're either spinning the wheel or the clutch. It's gonna be hard to keep things from spinning. loll; because it's so light, and such a small tire. Pretty sweet build though. You can always upgrade to a much softer tire. They get a much better grip, but the downside is that they don't last as long, and they can be a little more expensive. But that could be a good upgrade once this tire gets bare-- which it will if you ride it a lot; just do some research on tires and you'll find a good upgrade. I was putting soft tires on my 99 CBR 900, and I would go through tires almost every other year; (but that's also because I rode it like a maniac).
Damn son! You think burning the radiator was bad..... Wait till I tell you just how EXPLOSIVE that acetone can is!! 👀
Also keep in mind the fork does flex backwards a bit when breaking.
Great job on the bike build.
ONE SMALL BUMP IN THE ROAD AND THE EXHAUST IS GONNNEE LMAO
The neighbors have got to love you 😅
a project usually takes 4 times as long as you think and you usually make 3 dump mistakes a day... Thats just how how it works so keep it up buddy!
Your builds are so cool. One thing you should check is to see if your pipe drags when the forks are compressed and the bike is leaned towards the pipe. That would simulate braking hard in a turn. You definitely don't want to find out while you're actually braking in a turn.
IT LIVES! great work, bro! super inspiring project
When you glue an o-ring like that.. Just make sure that you are putting that seam right next to a bolt, and as far away from the other water jackets as you can; and you'll have the best chance at longevity.
Bro this is THE best build I’ve ever seen !!! You have a gift man KEEP DOING THIS
You must have used that Acetone can arm rest for welding to troll us hey? Great Fab work to make this work. Well done on not blowing up!! LoL
Haha it was the closest thing to me
this was the greatest idea i’ve ever seen
Best idea ever..Banshee was a Street Bike in its First Application
Thats awesome. I put a cbr600rr motor in a blaster years ago. This reminds me of that. Be careful kid. Split my collar bone into 3 pieces on that unit.
Love how you just go at it and build/fab it up! You also have my attention at 2 stroke anything. I have found cutting 2 pieces of scrap to mount as your shock at full extension, and at full compression, and sliding the forks up/down the fork travel distance can help with clearance issues during fab up.
I'm not a Banshee engine expert, but I think most 2 stroke cooling systems flow out the cylinder head to the top rad inlet, making the hose to the water pump a "cooled" water inlet vs hot outlet. For "Water-ever" it's worth....Awesome crazy build BTW!!!
Just dent in the part of the exhaust that hits the front tyre 🙌
Sounds like clutch is slipping issues. cool build, keep it up.
Jokes on you it’s just serious transmission issues
@@Sinister_fartbox no joke. Clutch slipping.
@@internetttroll1908 you slipping
@@Sinister_fartbox Slipping on your bald head.
@@internetttroll1908 in your slow head
Dude that thing is sick. Sweet build my guy.
That's so cool! love how you find a way to make everything work, true ingenuity.
Hell yea, let’s go man!
Tomorrow on crazy ideas: hyabusa swapped grom...
You gotta shift early on a 2 banga man, did the same with the mower. Shift fast and keep it in band!
I was going to say was, you could mount the rad on the tail under the seat. It will get plenty air and even add coolant volume.
Why she sound so angry?!?! :))) AWESOME JOB SIR!
I bet this guys neighbors just love him lol
Lol. If people are talking about welding near the tire and UV rays transferring through a camera, can’t wait to see what they’ll say about using a can of acetone for a hand prop while you weld😂 (and yes, I know it’s probably empty), but you know how many internet safety inspectors there are out here
You really only need to be able to reach one choke. I never once used both. Looks awesome man. That pipe sounds great.
That’s hilarious ppl thought they are getting welding flash😂 not even surprised anymore🥳
anything with 2 stroke engine i always love it
Outstanding Bro! That expansion chamber section of the exhaust is awfully close to the ground.
well done! i did a 250 2t swap, was asked about doing a twin but figured it would be too wide. nope, you proved me wrong . love it.
Grade A 2 wheel death machine! Well done and keep up the good work!
Bet the neighbors love you
Bro your getting JACKED!! love it keep up the solid work 💪 😁✌️💚✊️🔥
Haha thanks!
The fact that somebody thought watching people weld on youtube would affect their eyes 😆
You've come a long way. Nice.
You could probably get a half inch if you cut a ring out by the header flange. It looks like you have a couple inches on your 2into1 header. Love the build bro👍🔥🔥🔥
Check the forks in the tranny and double check your shims are all in place. Can't wait to see this monster dialed!
Man is that some janky shit goin on......fekin love it. If it was a pristeen build with perfect welding (although yours ain't bad) and engineered magnificence it wouldn't be believable......this is so much better. Millimeter clearances and using an acetone can as an arm rest......love your work dude.
Yes it doesn't transfer through the screen but it's so bright and I often have to look away or skip ahead due to the welding. Great videos though much respect
What a talented young man. Looks like a factory build
Vas your killing it 👏🏾👏🏾. Love this build
I can't believe people thought welding on video would hurt their eyes...
Thing is dope dude!
I’ve been watching your videos since you built your NASCAR go kart. The quality of your builds has always been good, but you are such a better welder than you were. And I want to ride the GROM.
Legendary! Let’s line it up with the yz!
Do a zero swapped from that thing would absolutely smoke that 💨
0:00
You gotta adjust that idling🤣
It’s amazing how crazy this seems, yet when you think about it what’s been made is basically an rd350lc but worse. Shame we don’t get new bikes like that any more.
You should mod some bigger forks on and a bigger sway arm in the back for slightly bigger tires it will help gearing
Must be fast 🔥
Is it still a grom...yes. Is it fun as hell...still yes.
Wow your really good at this!! Awesome job!!
Just started watching the video.. all i can say is that groms gonna be insane!