Thanks a lot for the tips! After watching lots of videos, I was suspecting that DLP was useful for displaying up close, but no video confirmed that until I found yours. Thanks for the other tips too. Best video about projectors for artists!
thanks for the great video. I think one more thing is very important either - to be possible to use it in the light room, during the day. I see you do it, but is the pricture enough clear? can you make one more, the like this video, because 4 years later maybe there are other options, more and different. for some cheap but enough good projectors.
cool video! the video is four years old, the tech is advancing fast, none of these are for sale anymore, and iphone conectivity might be the way forward but your suggestion to use DLP stays relevant, thanks!
Depends how dark the room is. The further away you place the projector, the more faint the image appears. Any light in the room will wash out the image when placed further away.
I can rotate it 180 degrees in software, but I can't vertically flip it. Flipping would invert the image anyways, so I think rotating is better. I can rotate it 90 degree increments, so I could rotate a portrait image to fill the landscape sized area better.
Thanks, the arm is: Manfrotto 244 Variable Friction Magic Arm with Camera Bracket ($128) Manfrotto Super Clamp 035 ($25) It's kind of expensive, but I've seen that Manfrotto has some cheaper ones. I originally used mine to hold my dslr camera.
@@jg1964 The one I have is without the stud. The armature just sticks into it without a stud. I think the version with the stud is in-case you want to attach something else instead of the arm.
The filming arm you have over your desk, where can I get one please or what is it called. I really need something like this. TFS this was a super helpful video.
To get a big image, requires moving the projector away from the surface, which will cause the light to dim and require a darker room. Also if the image consists of a lot of darker pixels, the projector will project less light too. Also, the individual pixels will appear larger and more pixelated. So it depends I guess. Also might depend on the projectors specifications too.
Thank you so much although I’ve just found your channel ( I wish I did find it earlier ) Your vid is extremely informative and super helpful! It’s unfortunate that this model is not available in Australia 🇦🇺 but I will keep searching. You are an amazing soul sharing what others tend to hold back . Consider me a new subscriber! Thank you Thank you Thank you 🙏🏽😃⭐️⭐️⭐️⭐️⭐️
Very informative. I really appreciate as now I feel much more confident in what to look for. Appreciate your expertise. I edited as I went shopping and will you be my personal shopper? Not really kidding as I'm leery of eBay for this kind of purchase. Amazon would be fine but I get confused on their site when projectors are no longer available. I know my request is nervy but I wondered if you happen to see some if you could supply some links. I don't require the most high end as I'm a budding artist but would like one that meets all your specs and is decent. I have been saving up for this purchase. I subscribed and I know you helped more than enough, it's just me that gets confused on their site. If not I will certainly follow your info and try to be more patient in my shopping!! Thanks. 😊
I am doing rock painting and would like to know which projector you would recommend. The projector would have to have the capability of reducing the image to 3". Also I would like know the name of the tripod and where I could get it. It appears your tripod has great versatliliy which is what I am looking for. Thanking you inadvance, I remain: Ron Lundwall
@@tracingmasterpieces Just bought a Rif6 as it was the only thing I could find i my country that fitted what you describe, I hope I made the right choice!!
I’m so curious if this projector is still working out for you. It is interesting that the firm making these “white label” projectors from China is using a Japanese name (Ito). There are several artists promoting a similar projector -“pico genie impact” (1,2,3) as something specifically designed for art (sold online only from 1 firm in the UK) with discount codes. I can imagine some of these brands may even be knock offs even if they look identical. I wonder if Texas Instruments has a way to control who is allowed to label their product with “DLP” inside (like Intel)? I wouldn’t have any trust issues at a $35 price point but hard to know if this product will last for the $200 +. I think the average lifespan of small appliances from China is about 1 year (?) (based on Amazon reviews I’ve seen) (so many seem to have a high failure rate). TYSM for sharing all your research. 🙏
I don't use mine that much, but it still runs fine. I was lucky with the price of mine (I don't think the seller knew what they were selling). I'd say it is worth $100-150 or so (brand new) in my opinion. It seems like Texas Instruments has their dlp technology in a ton of products, and I don't think that should be a suspicious thing- if anything, it is a good indicator that there is quality tech inside the product. Most of the small pico projectors probably use the same internal components. You'd have to look more at how the build quality is of the shell and interface, etc. When I first got my projector, I was impressed with the weight of it and how solid it felt considering its size. I think that is an important detail- the build quality and materials that they use. The one I have has a metal body, with plastic top and bottom. The button interface is a bit clunky, but it does the job, and I can use the remote if I really want (but I have to point directly at the blue light on back for it to get the signal). I think what the manufacturer does is sell these to other companies that put their own branding onto it- Kodak even sells one of these versions, and these companies just distribute them. One thing I wonder about, is how long the projector will last if it is constantly used in awkward orientations, since there are spinning parts inside, that work to display the colors/image, and how the heat distribution might degrade things (it has a fan that seems to do a good job). Also, considering the smaller size, it might be easier for it to get knocked around or get dropped. So it is important to secure it very well when extending it up in the air with things.. That's probably one of the most important things to keep in mind I think when using it- securing it really well. Anyways- I think it's a very capable device for tracing images, and I've never been disappointed with it. The only thing I think I'd improve with it if I had the choice, was the user interface stuff in the software and how to control the images so that it is easier to navigate and with more options- because that is a bit limited and frustrating at times (if I remember correctly, it would cycle through the images, and I had to pause the image to keep it from cycling).. Anyways, hope this helps.
Thank you for your video. The only one I found with actual useful information. One question: I notice you are projecting your image with no hook up--is that wireless bluetooth--?? I purchased a Miroir M 75 and was delighted with it until I could NOT figure out how to go from my phone--a Samsung Galaxy A42--to the projector and have it display images from my phone. I have all the required adapters, my phone is usb-c compatible, and all I got was a screen that instructed me how to hook up the device. SO frustrating...I cannot find any information about HOW to use this. I thought it was my phone so looked into a screen mirroring app, smart screen etc. I can't get the phone to recognize the device? So I might be back to square one--any ideas? The M75 was only $70--I was hoping to stay in the $100-150 budget and now am confused all over again. If anyone out there is looking for a pico projector, one helpful search was "Cookie tracing", not art, artists, art projector etc. And ALL of the sites think you want to watch TV or movies in a tent in the back yard or on the ceiling....
I use the micro sd card slot. I put images from my computer onto the card and then just place the card in the projector and read from that. I don't know how to hook it up with a phone, unfortunately. I don't know much about that.
It would need to be set a bit far away to get that size, and thus would require a darkened room at that distance. Also the pixels would become more noticeable at that scale, unless you find a higher resolution projector. But if you don't need the image to be super detailed, then it would be fine I think..
Sounds silly but how does the image get loaded into the projector? You mentioned there is a mirco image slot - what goes into it? Does it hook up to my laptop any way so images can be down loaded into the projector directly off my laptop?
micro sd card goes into the slot. My laptop has an sd card slot.. The micro sd card came with an adapter to use with a standard size sd card slot.. If your computer doesn't have an sd card slot, you can probable find an adapter..
micro sd card goes into the slot. My laptop has an sd card slot.. The micro sd card came with an adapter to use with a standard size sd card slot.. If your computer doesn't have an sd card slot, you can probable find an adapter..
You would have to check the specifications of the projector you are interested in. Not all projectors have usb ports (mine doesn't have one).. and also, it would have to be the right kind of usb port. Some projectors have a usb port but are not used for transferring images. It might only be used for hooking up a mouse or something like that. So you'd have to check the specifications for the projector.
The projector I use is 100 lumens, and it is bright enough for me. Since I position it relatively close to the drawing surface, the projected image is very bright and I can trace images easily without it being dark. So I would say 100 lumens or more is fine. The further away you position the projector, the dimmer the projected light will be and the darker the room will need to be.
I've ordered 3 different brands of these and have sent back all three because I wasn't able to get any of them to project an image. Setting these things up is a pain. I followed the instructions explicitly but to no avail. Do you know of any videos that explain how to set one of these up to project a still image? I just sent back the $160 Phillips version. The previous version was a $209 EZCast Beam J2. The instructions weren't written by whomever made the projector nor was English their first language.
Hello, I bought myself the pico s6. Since I have limited space, I would like to put it on my table as seen in your video . I was wondering where you can find the kind of ergonomic arm you use in your video. Can it be found in Quebec. Thank you for your reply. Excuse my English, I used google translation.
Hi.. The articulating arm that I use is the Manfrotto 244 Variable Friction Magic Arm with Camera Bracket , and also the Manfrotto Super Clamp 035. www.bhphotovideo.com/c/product/553825-REG/Manfrotto_244_244_Variable_Friction_Magic.html ..but It is kind of expensive though. A cheaper option would be a generic tripod with an action selfie-stick that can attach to it.. something like this: www.walmart.com/ip/iPhone-Hole-Shocking-Mount-Inch-Self-Pink-Monopod-With-1-4-Camera-Holder-For-Portrait-Selfie-Screw-Extendable-Adajustable-Stick-InnoLife-Samsung-Hand/327826695 ..You can attach something like that to a Tripod and save some money.
Thanks for the tutorial. I am so technology ignorant. I need a pico projector badly as I draw ones I need larger and tired of using grids. priblem being not one of the ones in your list is available right now. Thanks
It depends on whether the dlp projector supports it. You'd have to make sure to look into the specifications of the dlp projector you are considering and see what it can connect to. I don't know much about connecting those devices, but I'm pretty sure there are projectors that can connect to them- I just don't know which ones exactly.
The little tripod thing? That came with the projector.. It's just a generic little nameless tripod. Or do you mean the armature that is attached to the drawing board? That is the Manfrotto 244.
I think smaller projectors are more suitable for this kind of work, as they are lighter weight, though they may be more fragile. It is important to get a strong support for it so it doesn't fall. If it has a socket for a tripod, you can find equipment to mount it on/attach it.
Depends how dark your room is, how bright the image is that you'll be projecting (darker images would be more difficult to see), what color your canvas is or your wall (darker colors are more difficult to project onto).. If the image and surface is bright, and the room isn't too bright, you could easily project a 10 foot or more image. You would start to see some of the pixels though since the projector is low resolution.
If you are referring to the small cube shaped one, that one should be fine, however, there is no quarter inch socket to mount it to a tripod or other things. So you will need to find a way to mount it.
I don't think it matters that much for close/small projections. Higher resolutions will provide a higher concentration of detail, but when you are tracing it can become tedious to trace every single detail. The projector I have has a low resolution, so you can see some of my videos for an idea on how that resolution looks.
@@gracemurrayart You're welcome! Yeah- it can be confusing with all the choices, and most are geared towards watching movies rather than art. Glad to have helped.
That is a nice feature to have. That helps if you can't position the projector directly facing the surface, or if you want it off to the side a bit. But if you have a good way to mount it, then you won't need it.
Thank you!!! I've been trying to figure out exactly what you just described and you have just made it all make sense. Your awesome for sharing this knowledge for which I think TH-cam should have some incentive or something to reward your explaining and sharing this advancing art to progress in it's many traditional and in it's new genre manifestations using these forms of media. Again, praise to your work. Randy Chavez
5 main features are ??? Can you look if I am right? I am from Belgium and sometimes I don't understand you clearly. Thank you I have 7: 1) DLP 2) rechargeble battery 3) micro Sd card 5) support images formats 6) fysical budings ? 7) ipod
Hi awesome information! can you tell me what the projector arm is that you have fastened to your desk as I am looking for this exact set up and will be ordering the AAXA S2 Mini also!
It is the Manfrotto 244 Variable Friction Magic Arm with Camera Bracket.. You also would need the Manfrotto Super clamp... Manfrotto also has other types of articulating arms, but I haven't tried them. I used mine for my heavy camera before I bought my projector.
Love your tips and recommendations, however, nothing on Amazon passes your "5 things" list currently sold on Amazon for less than 350$ US... and I have been looking for anything that covers at least 4 of your list and most under 600$ don't even do it now. I have found one at 189 for the knockoff like yours, but it doesn't have a tripod mount, or card slot... they are getting real cheap these days.
Thank you for this info and your channel sorry I’m late to the party! I did just pull the trigger on one, second hand, that appears to have the 5 criteria, but other than being second hand ($30 shipped, buyer protection) my biggest red flag is that it was nearly impossible to find any information on it. Finally I found a manual online for it and was wondering if you heard of it or see something I should have paid attention to that I didn’t, it’s called Simplebeamer vipico dlp ?
@@tracingmasterpieces so it finally arrived! This is something I got second hand for $30, it has a sticker with its more universal name “Gp1s” and I got it with no tripod or charger but luckily it was a matter of finding a micro usb. Also I did not have everything I would need such as my own tripod or a tf memory card, but really what made me least prepared to make a decent judgment on it was my own lack of experience! All that said, it works! It doesn’t have the self adjusting screen perspective even though at least it does have dlp. For the work I would like to use it for I would benefit from some spontaneity so even though it can use a memory card I was tackling without experience or any available user manual, how to set up screen mirroring on my iPhone, and again I need to stress that I am not someone who knows what they are doing! The result has been weird, because for a brief moment I was able to and then I couldn’t anymore and when I was it was because I had an hml cable connected but it still didn’t last and it wasn’t clear to me what I was doing wrong. Then I plugged it into my iPad, maybe worth noting that the iPad may have been released closer in time as this device than my iPhone, and it works! Ok not right away, some weird stuff was going on with colours and stuff at first and I got a little lost in the menu without using the remote which doesn’t seem essential luckily but I still don’t know because it’s batteries are dead. So for $30 +some cheap accessories I am still pretty happy but I have a lot to learn as well! I wonder if I could use those plug in miracast things maybe?
@@SolarPunk80 That sounds like it worked out well for you :) Too bad there isn't a manual, as maybe that would have some guides on how to use it. You'll probably figure out stuff as you use it more, though. You could maybe try to search on how other projectors handle miracast stuff and maybe see if you can do the same with yours- I don't have any experience with that sort of thing. Sounds like you got a good deal though!
I don't have a phone to test that, so I'm not sure how that sort of thing works. I'd assume you can do that, but it probably depends on the software version and what phones it supports.
Tracing Masterpieces please help me please to find one of these projectors. I've been looking for one for almost 2 years and couldn't find one with those optimal characteristics. I've been wanting to ask you for a long time and only now dared to do it, because I lost hope I'll ever find one.
I haven't been looking at projectors lately, so I'm not sure where to get one. I bought mine off of ebay, and managed to get a good deal on it. If you search for dlp pico projectors, you'll probably find a variety of projectors. Most of the small sized projectors that use dlp will be very similar to each other- you just have to do some research whenever you find one and make sure it has the features you want. I've heard that the Kodak dlp pico projectors are good. Sorry for not being much help- I know how difficult it can be trying to find a projector.
Really helpful and I have just purchased the Kodak badged cube projector (could only find this and a Sunny badged in the UK). How did you find the projector when screen mirroring with an iPhone/iPad? I am finding the colours are very over saturated and the image is squished, so a circle is projected as an oval, what ever angle the projector is at. Can you offer any advice?
I haven't tried mirroring, but it sounds like maybe the resolution of the iphone/ipad isn't the same as the projector, so it stretches it to be the same aspect ratio. I'm not sure how to fix that, but if you are projecting an image, maybe you can rescale it to compensate for the stretch.
@@tracingmasterpieces Thank you for replying. I have updated the software and images are all displaying at the correct shape! Just the over saturated images to resolve now.
Thanks for the video but trn the projector away from the camera,there's no reason to point it directly at the camera , I can watch your video because it effects my eyes
I was kind of bummed that for the last couple of weeks I though I had at least tracked down a couple cube dlp projectors, wrongfully convinced they were this model until I realised that what I thought was a tripod mount hole was actually a headphone jack…. So it wasn’t this!
You are the only one doing these videos. Others claim the video is for artists, but they aren't, so thank you!
You Da Real MVP (Most Valuable ProjectorMan)
Thanks a lot for the tips! After watching lots of videos, I was suspecting that DLP was useful for displaying up close, but no video confirmed that until I found yours. Thanks for the other tips too. Best video about projectors for artists!
You’re so sweet:) thank you for your helpful videos. I’m now on a hunt for that projector
Your videos are great, thank you so much for creating these. Subscribed.
The most useful video on this subject is right here! Thanks for making this :)
This dude is awsome on them projectors i need to get one. Asap. I miss painting
thanks for the great video. I think one more thing is very important either - to be possible to use it in the light room, during the day. I see you do it, but is the pricture enough clear?
can you make one more, the like this video, because 4 years later maybe there are other options, more and different. for some cheap but enough good projectors.
Your videos are excellent. Thank you very much.
i love it, tracing the greats......great stuff.
Thanks you are helping me very much.
cool video! the video is four years old, the tech is advancing fast, none of these are for sale anymore, and iphone conectivity might be the way forward but your suggestion to use DLP stays relevant, thanks!
Wonderful information. Thank you. Could you tell us more about the armature? Eg brand or generic name?
I go over my equipment here: th-cam.com/video/H5jidfdFywo/w-d-xo.html
Very helpful, thanks a mill.
I’m so glad I watched your video!! I would have totally bought something wrong!!!
I need a small projector for art work with super high resolution what you suggest ?
Hi I’m trying to get a projector for projecting the picture on canvas oil paintings. Do you know where I can get one ???
Hello, where can i buy this product at low cost if you can tell me
What is suitable for projecting on to a canvas 11" x 14"? Thx
I have pique projector , its a cube but it does not have a place to attach the trip-pod. can you suggest a trip-pod with clamps
Thank you!
Can I use that for Mural? What's the largest size can be projected on wall?
Depends how dark the room is. The further away you place the projector, the more faint the image appears. Any light in the room will wash out the image when placed further away.
Can you flip the image vertically (in the software)? e.g if you had the projector mounted so the image was natively upside down.
I can rotate it 180 degrees in software, but I can't vertically flip it. Flipping would invert the image anyways, so I think rotating is better.
I can rotate it 90 degree increments, so I could rotate a portrait image to fill the landscape sized area better.
You look a bit like Eminem :-) Great reviews. Thumbs up!
My projector doesn’t have a mounting hole. Any suggestions? Please help
Bless your soul kind sir!
thankyou, so helpful!!!
Very informative.What is the name or brand of the arm, you have attached to your table ? thank you.
Thanks, the arm is:
Manfrotto 244 Variable Friction Magic Arm with Camera Bracket ($128)
Manfrotto Super Clamp 035 ($25)
It's kind of expensive, but I've seen that Manfrotto has some cheaper ones. I originally used mine to hold my dslr camera.
Thank you for your reply , I think it is strong enough.
Is the Manfrotto super clamp with or without stud?. And again thanks
@@jg1964 The one I have is without the stud. The armature just sticks into it without a stud. I think the version with the stud is in-case you want to attach something else instead of the arm.
Ok now I am understand, so I will buy my without it. You really helped me a lot , I appreciate it, thanks
That's really useful to know. Thanks for that
Can you tell me the brand of the clamp on armature? It looks substantial.
Manfrotto 244
The filming arm you have over your desk, where can I get one please or what is it called. I really need something like this. TFS this was a super helpful video.
It is called the Manfrotto 244 Variable Friction Arm with Camera Bracket. Also a Manfrotto Super Clamp.
Thanks :)
@@tracingmasterpieces Thats awesome, thanks so much.
Where can I find the list you were offering?
How big can one make the pitcher, both height and width?. Thanks.😅😅😅🇬🇧🙏
To get a big image, requires moving the projector away from the surface, which will cause the light to dim and require a darker room. Also if the image consists of a lot of darker pixels, the projector will project less light too. Also, the individual pixels will appear larger and more pixelated. So it depends I guess. Also might depend on the projectors specifications too.
Thanks for sharing!
Thank you so much although I’ve just found your channel ( I wish I did find it earlier )
Your vid is extremely informative and super helpful!
It’s unfortunate that this model is not available in Australia 🇦🇺 but I will keep searching.
You are an amazing soul sharing what others tend to hold back .
Consider me a new subscriber!
Thank you Thank you Thank you 🙏🏽😃⭐️⭐️⭐️⭐️⭐️
You're so helpful . Thankyou
Very informative. I really appreciate as now I feel much more confident in what to look for. Appreciate your expertise. I edited as I went shopping and will you be my personal shopper? Not really kidding as I'm leery of eBay for this kind of purchase. Amazon would be fine but I get confused on their site when projectors are no longer available. I know my request is nervy but I wondered if you happen to see some if you could supply some links. I don't require the most high end as I'm a budding artist but would like one that meets all your specs and is decent. I have been saving up for this purchase. I subscribed and I know you helped more than enough, it's just me that gets confused on their site. If not I will certainly follow your info and try to be more patient in my shopping!! Thanks. 😊
Hi, if you find any projectors that you're interested in, I can give my feedback on it.
Tracing Masterpieces Thank you. Sounds good!
I am doing rock painting and would like to know which projector you would recommend. The projector would have to have the capability of reducing the image to 3". Also I would like know the name of the tripod and where I could get it. It appears your tripod has great versatliliy which is what I am looking for. Thanking you inadvance, I remain: Ron Lundwall
@@tracingmasterpieces Just bought a Rif6 as it was the only thing I could find i my country that fitted what you describe, I hope I made the right choice!!
I’m so curious if this projector is still working out for you. It is interesting that the firm making these “white label” projectors from China is using a Japanese name (Ito). There are several artists promoting a similar projector -“pico genie impact” (1,2,3) as something specifically designed for art (sold online only from 1 firm in the UK) with discount codes. I can imagine some of these brands may even be knock offs even if they look identical. I wonder if Texas Instruments has a way to control who is allowed to label their product with “DLP” inside (like Intel)? I wouldn’t have any trust issues at a $35 price point but hard to know if this product will last for the $200 +. I think the average lifespan of small appliances from China is about 1 year (?) (based on Amazon reviews I’ve seen) (so many seem to have a high failure rate). TYSM for sharing all your research. 🙏
I don't use mine that much, but it still runs fine. I was lucky with the price of mine (I don't think the seller knew what they were selling). I'd say it is worth $100-150 or so (brand new) in my opinion. It seems like Texas Instruments has their dlp technology in a ton of products, and I don't think that should be a suspicious thing- if anything, it is a good indicator that there is quality tech inside the product. Most of the small pico projectors probably use the same internal components. You'd have to look more at how the build quality is of the shell and interface, etc. When I first got my projector, I was impressed with the weight of it and how solid it felt considering its size. I think that is an important detail- the build quality and materials that they use. The one I have has a metal body, with plastic top and bottom. The button interface is a bit clunky, but it does the job, and I can use the remote if I really want (but I have to point directly at the blue light on back for it to get the signal). I think what the manufacturer does is sell these to other companies that put their own branding onto it- Kodak even sells one of these versions, and these companies just distribute them. One thing I wonder about, is how long the projector will last if it is constantly used in awkward orientations, since there are spinning parts inside, that work to display the colors/image, and how the heat distribution might degrade things (it has a fan that seems to do a good job). Also, considering the smaller size, it might be easier for it to get knocked around or get dropped. So it is important to secure it very well when extending it up in the air with things.. That's probably one of the most important things to keep in mind I think when using it- securing it really well. Anyways- I think it's a very capable device for tracing images, and I've never been disappointed with it. The only thing I think I'd improve with it if I had the choice, was the user interface stuff in the software and how to control the images so that it is easier to navigate and with more options- because that is a bit limited and frustrating at times (if I remember correctly, it would cycle through the images, and I had to pause the image to keep it from cycling).. Anyways, hope this helps.
Thank you for your video. The only one I found with actual useful information.
One question: I notice you are projecting your image with no hook up--is that wireless bluetooth--?? I purchased a Miroir M 75 and was delighted with it until I could NOT figure out how to go from my phone--a Samsung Galaxy A42--to the projector and have it display images from my phone. I have all the required adapters, my phone is usb-c compatible, and all I got was a screen that instructed me how to hook up the device. SO frustrating...I cannot find any information about HOW to use this.
I thought it was my phone so looked into a screen mirroring app, smart screen etc. I can't get the phone to recognize the device? So I might be back to square one--any ideas? The M75 was only $70--I was hoping to stay in the $100-150 budget and now am confused all over again.
If anyone out there is looking for a pico projector, one helpful search was "Cookie tracing", not art, artists, art projector etc.
And ALL of the sites think you want to watch TV or movies in a tent in the back yard or on the ceiling....
I use the micro sd card slot. I put images from my computer onto the card and then just place the card in the projector and read from that. I don't know how to hook it up with a phone, unfortunately. I don't know much about that.
Whats best dlp wireless projector work with iPhone and Android devices. Thanks for sharing 👍
I'm doing a 1220mm x 900 mm painting. Needs to be sharp and I guess quite far away. Will this codac or cube do the trick ?
It would need to be set a bit far away to get that size, and thus would require a darkened room at that distance. Also the pixels would become more noticeable at that scale, unless you find a higher resolution projector. But if you don't need the image to be super detailed, then it would be fine I think..
@@tracingmasterpieces I need a small projector for art work with super high resolution what you suggest ?
Thank you for this vid!
you're welcome!
Sounds silly but how does the image get loaded into the projector? You mentioned there is a mirco image slot - what goes into it? Does it hook up to my laptop any way so images can be down loaded into the projector directly off my laptop?
I would like to know the same thing! Thanks for asking!
micro sd card goes into the slot. My laptop has an sd card slot.. The micro sd card came with an adapter to use with a standard size sd card slot.. If your computer doesn't have an sd card slot, you can probable find an adapter..
micro sd card goes into the slot. My laptop has an sd card slot.. The micro sd card came with an adapter to use with a standard size sd card slot.. If your computer doesn't have an sd card slot, you can probable find an adapter..
Thank you best video
You mention a micro sd card slot but would a usb port work as well and have your images on a stick?
You would have to check the specifications of the projector you are interested in. Not all projectors have usb ports (mine doesn't have one).. and also, it would have to be the right kind of usb port. Some projectors have a usb port but are not used for transferring images. It might only be used for hooking up a mouse or something like that. So you'd have to check the specifications for the projector.
This is amazingly helpful
Awesome video. Thank you! what is the stand you're using?
thank you! Very helpful
What is this projectors used for???
What lumens would you suggest?
The projector I use is 100 lumens, and it is bright enough for me. Since I position it relatively close to the drawing surface, the projected image is very bright and I can trace images easily without it being dark. So I would say 100 lumens or more is fine. The further away you position the projector, the dimmer the projected light will be and the darker the room will need to be.
I've ordered 3 different brands of these and have sent back all three because I wasn't able to get any of them to project an image. Setting these things up is a pain. I followed the instructions explicitly but to no avail. Do you know of any videos that explain how to set one of these up to project a still image?
I just sent back the $160 Phillips version. The previous version was a $209 EZCast Beam J2. The instructions weren't written by whomever made the projector nor was English their first language.
can they be used in Europe as well? One needs extra devices to use them over in Europe?
Mine has a DC 5V/2A Micro USB input for charging it.
Hello,
I bought myself the pico s6. Since I have limited space, I would like to put it on my table as seen in your video
. I was wondering where you can find the kind of ergonomic arm you use in your video. Can it be found in Quebec. Thank you for your reply. Excuse my English, I used google translation.
Hi.. The articulating arm that I use is the Manfrotto 244 Variable Friction Magic Arm with Camera Bracket
, and also the Manfrotto Super Clamp 035. www.bhphotovideo.com/c/product/553825-REG/Manfrotto_244_244_Variable_Friction_Magic.html ..but It is kind of expensive though. A cheaper option would be a generic tripod with an action selfie-stick that can attach to it.. something like this: www.walmart.com/ip/iPhone-Hole-Shocking-Mount-Inch-Self-Pink-Monopod-With-1-4-Camera-Holder-For-Portrait-Selfie-Screw-Extendable-Adajustable-Stick-InnoLife-Samsung-Hand/327826695 ..You can attach something like that to a Tripod and save some money.
Another question: which one is the less noisy ? Thanks
I haven't used enough projectors to compare. The one I have is pretty quiet. I haven't really given it much thought.
Thanks for the tutorial. I am so technology ignorant. I need a pico projector badly as I draw ones I need larger and tired of using grids. priblem being not one of the ones in your list is available right now. Thanks
Can I project images for tracing from my ios iPhone or ipad with a DLP projector?
It depends on whether the dlp projector supports it. You'd have to make sure to look into the specifications of the dlp projector you are considering and see what it can connect to. I don't know much about connecting those devices, but I'm pretty sure there are projectors that can connect to them- I just don't know which ones exactly.
Can i ask the name of the stand? I have seen smaller tripods but not one like the one you have?
The little tripod thing? That came with the projector.. It's just a generic little nameless tripod. Or do you mean the armature that is attached to the drawing board? That is the Manfrotto 244.
@@tracingmasterpieces the thing attached to your desk
@@carolekinnear3221 Manfrotto 244
Thank you for the video. How can we make sure a projector can be turned and project on table top? Because some only project on walls
I think smaller projectors are more suitable for this kind of work, as they are lighter weight, though they may be more fragile. It is important to get a strong support for it so it doesn't fall. If it has a socket for a tripod, you can find equipment to mount it on/attach it.
Mirror? Not as in screen mirroring but like an actual mirror to rotate the angle 90 degrees
What's the largest size image that can be projected on the wall or painting support with this type of projector? Thanks.
Depends how dark your room is, how bright the image is that you'll be projecting (darker images would be more difficult to see), what color your canvas is or your wall (darker colors are more difficult to project onto).. If the image and surface is bright, and the room isn't too bright, you could easily project a 10 foot or more image. You would start to see some of the pixels though since the projector is low resolution.
What are your personal thoughts on the Vankyo Burger?
Seems okay to me.
What kind of tripod do you have?
Vivitar Tripod model 11000
Hi, thank you for your videos! What do you think about DLP Texas instruments projector?
If you are referring to the small cube shaped one, that one should be fine, however, there is no quarter inch socket to mount it to a tripod or other things. So you will need to find a way to mount it.
@@tracingmasterpieces thank you 🙏
Thank you for this video! Does resolution matter too much when projecting onto close/smaller surfaces?
I don't think it matters that much for close/small projections. Higher resolutions will provide a higher concentration of detail, but when you are tracing it can become tedious to trace every single detail. The projector I have has a low resolution, so you can see some of my videos for an idea on how that resolution looks.
@@tracingmasterpieces as I suspected, thank you, you've been a great help in this confusing world of projectors!
@@gracemurrayart You're welcome! Yeah- it can be confusing with all the choices, and most are geared towards watching movies rather than art. Glad to have helped.
God bless u
What about keystone settings? I have heard it is a good thing to have.
That is a nice feature to have. That helps if you can't position the projector directly facing the surface, or if you want it off to the side a bit. But if you have a good way to mount it, then you won't need it.
thank you :)
Thank you!!!
I've been trying to figure out exactly what you just described and you have just made it all make sense.
Your awesome for sharing this knowledge for which I think TH-cam should have some incentive or something to reward your explaining and sharing this advancing art to progress in it's many traditional and in it's new genre manifestations using these forms of media.
Again, praise to your work.
Randy Chavez
This is a joke right? You know what's even better? Learning to draw. It's cheaper and will get you further in life than cheating
The blinking projector gave me a headache. I wonder why you placed it like that during filming.
sorry about that :( I didn't think that would be a problem.
@@tracingmasterpieces its not. It didn't bother me
Didn't bother me either.
I’m having a hard time finding one
5 main features are ??? Can you look if I am right? I am from Belgium and sometimes I don't understand you clearly. Thank you
I have 7:
1) DLP
2) rechargeble battery
3) micro Sd card
5) support images formats
6) fysical budings ?
7) ipod
Physical buttons, on, off, etc rather than remote control
Hi awesome information! can you tell me what the projector arm is that you have fastened to your desk as I am looking for this exact set up and will be ordering the AAXA S2 Mini also!
It is the Manfrotto 244 Variable Friction Magic Arm with Camera Bracket.. You also would need the Manfrotto Super clamp... Manfrotto also has other types of articulating arms, but I haven't tried them. I used mine for my heavy camera before I bought my projector.
@@tracingmasterpieces thanks for the reply I went for a smaller cheaper one as I have a shelf I can attach it to above my work area.
Love your tips and recommendations, however, nothing on Amazon passes your "5 things" list currently sold on Amazon for less than 350$ US... and I have been looking for anything that covers at least 4 of your list and most under 600$ don't even do it now. I have found one at 189 for the knockoff like yours, but it doesn't have a tripod mount, or card slot... they are getting real cheap these days.
I Can`t buy ANY of these in the UK .☹☹
Thank you for this info and your channel sorry I’m late to the party! I did just pull the trigger on one, second hand, that appears to have the 5 criteria, but other than being second hand ($30 shipped, buyer protection) my biggest red flag is that it was nearly impossible to find any information on it. Finally I found a manual online for it and was wondering if you heard of it or see something I should have paid attention to that I didn’t, it’s called Simplebeamer vipico dlp ?
If it's what I see from the specs I found, it seems like it's a good one. I'd be interested in hearing what you think of it when you get it.
@@tracingmasterpieces omg, fingers crossed, I definitely will! :^)
@@tracingmasterpieces so it finally arrived! This is something I got second hand for $30, it has a sticker with its more universal name “Gp1s” and I got it with no tripod or charger but luckily it was a matter of finding a micro usb. Also I did not have everything I would need such as my own tripod or a tf memory card, but really what made me least prepared to make a decent judgment on it was my own lack of experience! All that said, it works! It doesn’t have the self adjusting screen perspective even though at least it does have dlp. For the work I would like to use it for I would benefit from some spontaneity so even though it can use a memory card I was tackling without experience or any available user manual, how to set up screen mirroring on my iPhone, and again I need to stress that I am not someone who knows what they are doing! The result has been weird, because for a brief moment I was able to and then I couldn’t anymore and when I was it was because I had an hml cable connected but it still didn’t last and it wasn’t clear to me what I was doing wrong. Then I plugged it into my iPad, maybe worth noting that the iPad may have been released closer in time as this device than my iPhone, and it works! Ok not right away, some weird stuff was going on with colours and stuff at first and I got a little lost in the menu without using the remote which doesn’t seem essential luckily but I still don’t know because it’s batteries are dead. So for $30 +some cheap accessories I am still pretty happy but I have a lot to learn as well! I wonder if I could use those plug in miracast things maybe?
@@SolarPunk80 That sounds like it worked out well for you :) Too bad there isn't a manual, as maybe that would have some guides on how to use it. You'll probably figure out stuff as you use it more, though. You could maybe try to search on how other projectors handle miracast stuff and maybe see if you can do the same with yours- I don't have any experience with that sort of thing. Sounds like you got a good deal though!
what is the name of your armature?
manfrotto 244
Can you just connect to your phone via Bluetooth, Wifi, without having to load a sd card in it.
I don't have a phone to test that, so I'm not sure how that sort of thing works. I'd assume you can do that, but it probably depends on the software version and what phones it supports.
Tracing Masterpieces please help me please to find one of these projectors. I've been looking for one for almost 2 years and couldn't find one with those optimal characteristics. I've been wanting to ask you for a long time and only now dared to do it, because I lost hope I'll ever find one.
I haven't been looking at projectors lately, so I'm not sure where to get one. I bought mine off of ebay, and managed to get a good deal on it. If you search for dlp pico projectors, you'll probably find a variety of projectors. Most of the small sized projectors that use dlp will be very similar to each other- you just have to do some research whenever you find one and make sure it has the features you want. I've heard that the Kodak dlp pico projectors are good. Sorry for not being much help- I know how difficult it can be trying to find a projector.
Really helpful and I have just purchased the Kodak badged cube projector (could only find this and a Sunny badged in the UK).
How did you find the projector when screen mirroring with an iPhone/iPad? I am finding the colours are very over saturated and the image is squished, so a circle is projected as an oval, what ever angle the projector is at. Can you offer any advice?
I haven't tried mirroring, but it sounds like maybe the resolution of the iphone/ipad isn't the same as the projector, so it stretches it to be the same aspect ratio. I'm not sure how to fix that, but if you are projecting an image, maybe you can rescale it to compensate for the stretch.
@@tracingmasterpieces Thank you for replying. I have updated the software and images are all displaying at the correct shape!
Just the over saturated images to resolve now.
@@lycia7846 That's good to know!
Thanks for the video but trn the projector away from the camera,there's no reason to point it directly at the camera , I can watch your video because it effects my eyes
When I read user reviews of Kodak Luma 350 I was very disappointed. For such a huge amount of money they have only "paperweight"...
That thing is expansive.
I was kind of bummed that for the last couple of weeks I though I had at least tracked down a couple cube dlp projectors, wrongfully convinced they were this model until I realised that what I thought was a tripod mount hole was actually a headphone jack…. So it wasn’t this!
Thank you!