You made this so simple & easy for me to follow. Thank you so much! I was just downloading color pictures onto design space & wondering how I would be able to print them out big enough for larger size shirts and boom! I turn on YT & there you are. God never lets me down I tell ya!
Your instructions were super clear and after watching many videos on the subject, yours was the most helpful. Thank you so much, you made this process super easy to follow! ❤️
After looking at many sublimation tutorials, I finally found one that I could follow, it was easy to understand and since it is wee hours in the am, I will do it later today. I am so grateful that you made it so plain and simple. I will join your Facebook group. Thank you soooo much!!!!
Thank you Angela!! I'm still learning. I wanted to share if you send the square behind the photo, it will allow for a view to see the correct placing of the square.
You may have to make one larger and over lap it when you tape it together. Or you may have to slice it in another area where the line won’t show up. When taping make sure you tape with the image facing down and tape from the back. It helps me.
Hi great video could you after u slice it without making the second piece 6.75 x9.25 just put them together n group both pieces together then make it the size u want then ungroup it n print it like that ? Thank u for a great video
Hi! Thanks for watching!Yes you can use Silhouette to make larger images however I only used Cricut in this video. You can use photoshop as well but I do not have experience with Photoshop.
Hi! I use Koala paper and the sub ink that I get is from Amazon Koala 150 sheets Sublimation Paper 8.5X11 Inches for Heat Transfer DIY gift compatible with Inkjet Printer with Sublimation Ink www.amazon.com/dp/B085DKJK95/ref=cm_sw_r_cp_api_glt_fabc_WD0QJS6GGVX4MRCKG3G1?_encoding=UTF8&psc=1 PJ Anti-UV Sublimation Ink for... www.amazon.com/dp/B07FCFHCJC?ref=ppx_pop_mob_ap_share
I need some help. Cricut design space is slicing parts of my image specifically on the words. It's never done that before and am wondering how to fix it
So I would weld the letters in the words first…this forces Cricut to treat the letters as one word. Then weld the words together if you can. This will be one piece and it won’t slice the words.
I had that problem but i choose another part if the image to slice on. You may have to see where you can slice and it still looks amazing. 🤗Hope this helps
Hey! The trick is to keep the Cricut measurements 6.75x9.25 after you slice the images. It may help to slice the image in using 6.75x9.25 first and then resize.
@@andistyles760 I made my first tumbler last night and the wrap wasnt wide enough. Would you recommend I use the method in this video or another method? I’m using Cricut Design Space
OMGosh! All my children call my mom mimi and not grandma. I never knew where that came from honestly. lol Is mimi what your grandchildren call you or is that your name. PS forgive me if you answered all my questions later in the video..Yes I am going to watch the rest of it, but I wanted to comment before I forgot.
Hmmmmm. Sometimes Cricut gets finicky. I have even had to flatten the image and then slice it for it to work. Do you want to share the image with me? I can take a look and see. I won’t share it.
You made this so simple & easy for me to follow. Thank you so much! I was just downloading color pictures onto design space & wondering how I would be able to print them out big enough for larger size shirts and boom! I turn on YT & there you are. God never lets me down I tell ya!
Glad I could help!
I can’t wait for you to try it!
Your instructions were super clear and after watching many videos on the subject, yours was the most helpful. Thank you so much, you made this process super easy to follow! ❤️
Thank you for watching!
Girl Bless you I was looking at so much videos and wasn't working and this one was perfect, short and simple. Thank you 🥰
You are welcome!
I just wanted to tell you I have been looking for days for a video like yours. You are a lifesaver. Thank you.
You are welcome! Thanks for watching!
After looking at many sublimation tutorials, I finally found one that I could follow, it was easy to understand and since it is wee hours in the am, I will do it later today. I am so grateful that you made it so plain and simple. I will join your Facebook group. Thank you soooo much!!!!
You are so welcome! I am glad it helped. Thanks for watching!
Man them others leave info out or just misleading. This is on point.
Thank you ! You made this really easy. Your directions are on point !!!
I appreciate your patience and your tutorials inspire creativity
Linda - THANK YOU!!! That is the goal! Thank you for watching!!
new subbie. I was watching and then started using my DS to follow and I am pleased finally I can print bigger!!! thank you
WELCOME! Yay! I am glad it worked for you?
Thank you so much for making this video and sharing this. 🙌🏽❤️
You are welcome!
Thank you for this tutorial!!! It was well taught and I feel can do this now!
You are welcome! Enjoy!!
Thank you so very much!!!!!! Best video out there! Sending you a big hug and kiss!!
Thank you! I am happy you love it!!
Thank you so much for this video!!! You’re awesome!!!♥️💯
You are welcome! Happy you found it useful!
I love this tutorial, thank you!
Thank you for watching 💕💕💕💕
Thank you soooo much! Very helpful!
Yay!! I am glad it helped you! Thanks for watching!
Omg thanks so much for sharing this video!!
You are welcome! Thank you for watching!!❤️❤️❤️
Thanks for helping me to understand how to make a larger image. Please will you share with me where you get your beautiful melanin images from?
Great Tutorial. Thanks and God Bless you 😘
Also new subscriber…yayyyyy
❤️❤️❤️
My issue is similar but i want to print and sublimate on a 20 oz skinny tumbler and i didn't think ahead that it was too large to print.
Thank you so very much!
You are so welcome! Enjoy!
Thank you
You really helped me
Thank you for watching!!
Thank you Angela!! I'm still learning. I wanted to share if you send the square behind the photo, it will allow for a view to see the correct placing of the square.
Hello. Yes. You can send the photo to the back for a better view.
@@andistyles760 I must say you explained that wonderfully! Thank you! you made it easy peasy
@@ladyme578 that is the goal to make it easy so we can craft with no limits!!❤️❤️❤️
Thank you!
My pleasure!!!
Thank you!!!!!!!!!!!!!
Thank you for watching! It was a pleasure!
Thank you.
You are welcome!!
THANK YOU, THANK YOU, THANK YOU!!!
You are most welcome!!❤️❤️❤️
When I click on the shift key nothing happens. My boxes didn’t turn gray
Hi question when I slice image and go to print the image doesn't look right
Thank you. I know you were teaching or showing. I'm not home at moment however is possible to make image 12 inches wide then slice it?
You are welcome. Yes you can I actually do that sometimes. Make it the size I want then slice.
@@andistyles760 thank you. 😊
What size do you usually do your design for different sizes?
6.75 x 9.25 for small/ medium
11x11 for large /Xl
12x13 for Xxl and highher
Is it necessary to cut/trim with scissors or can you use a paper trimmer?
You can use paper trimmers. Scissors is what I had on hand. 😃
When I go through these steps, slice doesn't highlight. I'm so frustrated. 😅
S A M E !! Did you figure it out?
I’m having trouble with a line where I peice the two together any suggestions?
You may have to make one larger and over lap it when you tape it together. Or you may have to slice it in another area where the line won’t show up. When taping make sure you tape with the image facing down and tape from the back. It helps me.
Hi great video could you after u slice it without making the second piece 6.75 x9.25 just put them together n group both pieces together then make it the size u want then ungroup it n print it like that ? Thank u for a great video
Thank you for watching. Yes you could do it that as well. I can see grouping it together to make sure it is aligned correctly. Great suggestion!!
Thank u ❤️
Can you use silhouette to make bigger I have both cricut and silhouette or can you use photoshop
Hi! Thanks for watching!Yes you can use Silhouette to make larger images however I only used Cricut in this video. You can use photoshop as well but I do not have experience with Photoshop.
How do you get your image color bright?? How
Hi! I use Koala paper and the sub ink that I get is from Amazon
Koala 150 sheets Sublimation Paper 8.5X11 Inches for Heat Transfer DIY gift compatible with Inkjet Printer with Sublimation Ink www.amazon.com/dp/B085DKJK95/ref=cm_sw_r_cp_api_glt_fabc_WD0QJS6GGVX4MRCKG3G1?_encoding=UTF8&psc=1
PJ Anti-UV Sublimation Ink for... www.amazon.com/dp/B07FCFHCJC?ref=ppx_pop_mob_ap_share
Hey! What kind of paper you using?
My favorite paper is Koala Sublimation Paper. i love it!
I need some help. Cricut design space is slicing parts of my image specifically on the words. It's never done that before and am wondering how to fix it
So I would weld the letters in the words first…this forces Cricut to treat the letters as one word. Then weld the words together if you can. This will be one piece and it won’t slice the words.
@@andistyles760 thank you!
@@serenadarling4100 you are welcome!!♥️
First question I have is your file a SVG?
No. This file is a png
It is a png file
Thanks for this video. Can you heat press with the tape on the image?
You are welcome! Yes. The tape helps to hold the gases from the ink in place and created your image. ☺️
I thought this also, I thought you couldn’t put tape over the image anywhere or it’ll mess up the image hmm
Can i do this for tumblers
As long as you use sub paper yes.
this was very simple, but mine is still not lining up its off juuust a tad, can you help with this???
I had that problem but i choose another part if the image to slice on. You may have to see where you can slice and it still looks amazing. 🤗Hope this helps
@@andistyles760 question can I just do this 2 times instead of 4??? Wondering if that will be better
Here is the video I have with slicing twice hopefully this will help.
th-cam.com/video/E1h217FWbdQ/w-d-xo.html
@@karlettesnowton9330 yes. This video will show how I do this with two times
th-cam.com/video/E1h217FWbdQ/w-d-xo.html
Tried your version but it still says it's too big to print and cut
Hey! The trick is to keep the Cricut measurements 6.75x9.25 after you slice the images.
It may help to slice the image in using 6.75x9.25 first and then resize.
@@andistyles760 got it Angela. Thank you for sharing your videos. Can you show a video of your print image?
@@keonipauole1828 yes I can.
@@andistyles760 Awesome
I just uploaded a video doing this from beginning to end! Let me know how it works for you. 😊
Do you use this method for tumblers too?
No. I usually measure my tumblers and size to that. I have a guide for tumblers that helps me size them.
@@andistyles760 I made my first tumbler last night and the wrap wasnt wide enough. Would you recommend I use the method in this video or another method? I’m using Cricut Design Space
@@brittanyg5175 yes try this method and adjust accordingly.
@@andistyles760 thank you!
@@brittanyg5175 you are welcome! Let me know how it goes.
Where do you get yr images?
Etsy and Creative Fabrica. This one came from Etsy.
OMGosh! All my children call my mom mimi and not grandma. I never knew where that came from honestly. lol Is mimi what your grandchildren call you or is that your name. PS forgive me if you answered all my questions later in the video..Yes I am going to watch the rest of it, but I wanted to comment before I forgot.
Hi! My grands call me nana but I made that shirt for a friend bc that is what her grands call her. ☺️
I could not find your group on FB, are you still active on FB?
My account was hacked. I will start a new group soon. ☺️
Thank you for this tutorial. What`s the name of your face book group?
You are welcome! Thanks for watching!I have to recreate a new one since my account was hacked.
This didnt work for me.. I did it but it keep saying image to large.
Hmmmmm. Sometimes Cricut gets finicky. I have even had to flatten the image and then slice it for it to work. Do you want to share the image with me? I can take a look and see. I won’t share it.
It keeps saying machine can't read censor marks what am I doing wrong
Are you trying to cut the design through circuit?
No results??
Please elaborate
We can see nothing but your computer
I wanted to show the steps on the computer so you could have the steps and see them.
Hi first time using a Cricut I would like to join your Facebook page what is the name on Facebook you are awesome thank you
Hi! Thank you for watching. It is Kraftee Designers. I would love to have you!!