OMG...yes, I recieved a design from Etsy and it was too short. YOU saved me. I follwed your clear instructions and it came out perfect. Yes, I'm new to this and totally freaked out until I watched you video.. ❤❤❤
Just wanna say thank you!!!.. I dont know how many videos I've watched and tried following and so much paper. Come across yours and first try and its perfect!.. thank u thank you!!!
You don’t know how much this just helped me, even though I was putting the correct measurements in for some reasons the wind was not coming out right! I sat there for 2 hours trying to get the measurements to come out right got a headache lol I gave up, went to work, & came home to watch tutorials, & found yours!!! Thank you sooo much!!!
You are welcome and thank you for watching. We have some straight to the point videos as well as open Q&A Live videos all are really helpful. Feel free to post questions on any video you come across.
You are God sent. I was struggling so badly trying to figure out how to reprint a design that I bought from a print shop. Found the design on Etsy to recreate another cup and couldn’t print it correctly to save my life thank you so much
Getting ready to try my 1st sublimation cup since I've watched your video and can understand how to set it up in silhouette studio. thank you so much, I've watched a bunch of different videos and couldn't figure it out. I just joined your Facebook group too :)
My white box is a different size on silhouette studio. I clicked print and i previewed what it would look like and my image is cut off. I made sure the red box was the same size. Help! I LOVE this video but i need help. Can you do another video of how to finish printing 🙏🙏 this is my first time
Hi, tfw this applies to basic edition also. I personally use business edition but everything here is basic features. I have a video on tapered. You have to have designer edition plus or business edition for the conical wrap.
If I’m making a 30 oz tumbler … what kind of paper size would I need ? I just bought a Epson 2720 to convert into sublimation printer. I hope you can help.
Hello Jackie. Sorry for the delay you may have goote. The answer already. You would need 11x17 paper and a wide format printer to make it as one print. With your printer you will need to piece 2 pages together.
Can you help me get this straightened out, so I was doing my tumblers today and for some reason I printed out some pictures with the same size I’d been doing the others before when it printed the image was smaller in size I keep moving the image to get it to the right size and it doesn’t move everything was normal till I printed 2 other designs
#reply thank you so much for all this ... im going to try it out. ive been having alot of trouble lately with resizing . i can not wait to try it this way
Im sorry i am a beginner an i cant understand how you even got to the screen you are on now. when i open it up all i see is a 12x12 mat. i can merge my pic an then i see them both. next i go to the rectangle box but nothing pops up to even put measurements up.. please help
Replay!! I’m a cricut user, looking for a software to print my wraps… Question: so we resize the image to the tumbler size, then create a “sheet of paper” (the size of paper we are using) and we rotate it and just set it over that “paper template… it doesn’t get attached or anything like that?? ANYONE ABLE TO HELP… MUCH APPRECIATED
Hello, you would do it exactly as outlined in the video. If there is a specific part that is not working for you once you try it out let me know and i can help figure out where the issue is.
@@SilaholicsAnonymous my issue was that it was tough to follow the look of your screen because you have Business version and I have basic… so it doesn’t look the same… I found someone else using Basic version and got it figured out!! Thanks so much
HELLO, On this channel i teach how to use Silhouette Studio. It is the program for the Cameo machine but you can design in it even if you dont have a machine. Just download from Silhouette America
I tried so hard to make this work. I was unable to drag and drop the image in the rectangle like you did. I'm angry, exasperated, and financially drained. All I wanted to do was make a tumbler. I can't understand why everyone else makes one in 15mins. I've been working on this for @ 30hrs. I've tried @ 15 different programs and thought your tutorial would be my saving grace. However clear your instructions are, I can't get the Silhouette program to do what you did. I currently have 6 different rectangles drawn everywhere, but can't get my pic into any of them. I just give up. My tumbler press is going in the trash. 😭
20oz and 12oz are not proportionate in size so you will either distort it or lose part of your image when resizing if it is a flatten jpeg/png file. If you are using a layered file you can manually resize all the elements to the new size
Hello and Thank you are watching. Could it just be that you are just new to Silhouette Studio and not familiar with the program so trying to follow in real time is a bit difficult for you? We recommend watching 1st to get an understanding and then watching and pausing in between the steps so that you can try them on your own and take notes. In TH-cam video we cant pause to wait and allow for viewers to catch up however we do teach like that in our paid classes where we have more time.
OMG...yes, I recieved a design from Etsy and it was too short. YOU saved me. I follwed your clear instructions and it came out perfect. Yes, I'm new to this and totally freaked out until I watched you video.. ❤❤❤
I would like to extend my appreciation for your taking time to explain your process in your video. I will watch again. Again I thank you.
Just wanna say thank you!!!.. I dont know how many videos I've watched and tried following and so much paper. Come across yours and first try and its perfect!.. thank u thank you!!!
You don’t know how much this just helped me, even though I was putting the correct measurements in for some reasons the wind was not coming out right! I sat there for 2 hours trying to get the measurements to come out right got a headache lol I gave up, went to work, & came home to watch tutorials, & found yours!!! Thank you sooo much!!!
You are welcome. Thank you for watching and commenting. It is important for us to know our content is helpful.
same!!!!!!!!!!! Ima at work but will be watching this video again because the frustration level is elevated
Thank you! Very easy, simple, and clear with no "fluff." Just what I needed!
You are welcome and thank you for watching. We have some straight to the point videos as well as open Q&A Live videos all are really helpful. Feel free to post questions on any video you come across.
You are God sent. I was struggling so badly trying to figure out how to reprint a design that I bought from a print shop. Found the design on Etsy to recreate another cup and couldn’t print it correctly to save my life thank you so much
You are an EXCELLENT Teacher!! Not having done a custom design before, I found your video easy to follow in how to print it for my tumblers. THANK YOU
#replay...new to sublimating. I love your teaching style
Thanks for your help last night. This was very helpful
Glad it helped!
wow that is so cool !! i must have this lol I just installed a new printer for this so excited !!
Oh my gosh!!! After 20 other videos....yours FINALLY made sense!!! THANK YOU!!!
O wow thank you for that. Glad to help.
Getting ready to try my 1st sublimation cup since I've watched your video and can understand how to set it up in silhouette studio. thank you so much, I've watched a bunch of different videos and couldn't figure it out. I just joined your Facebook group too :)
Thank you Sis, you are a star. Am a new subscriber all the way from South Africa🙌🙌
Welcome!! Thank You for Watching and Subbing!!
So glad I found this video... I also stated following your FB page ..
THANK You for watching and following
This was quick but helpfull thank you very much 👍
Thank you very much for your clear explanations and detailed instructions. ! I am checking out Silhouette Studio.
#playback. Thank you so much. This was very helpful. I can’t wait to watch more of your videos.
Awesome! Thank you! Glad it was helpful. What topics are you most interested in seeing videos for?
brand new to this and this was a "huge" help. I'll be coming over to your FB group , Thanks
Thanks!!! I have been trying to find out how to do this for the longest!!! Great detailed video!!!!
You are very welcome. Thank you for letting me know it helped you. Each feedback helps me determine the videos that are most needed.
My white box is a different size on silhouette studio. I clicked print and i previewed what it would look like and my image is cut off. I made sure the red box was the same size. Help! I LOVE this video but i need help. Can you do another video of how to finish printing 🙏🙏 this is my first time
I appreciate this video so much!!!!!!!!!!! It helped me so much
Excellent video! This is the only thing I struggle with is getting the size right!
Love your classes I am a beginner.
You saved my life!! Thank you so much❤️ finally was able to make it work🙌
That is awesome to hear. Thank you so much for watching. We have several tumbler videos that may help.
Thank you!!!!! I get my sublimation printer tomorrow, and this is so helpful! I just subscribed ❤❤❤
Great. Video! Two questions,is this only in the business edition you have or basic edition too? Second, any ideas on the tapered tumblers?
Hi, tfw this applies to basic edition also. I personally use business edition but everything here is basic features. I have a video on tapered. You have to have designer edition plus or business edition for the conical wrap.
Thank you so much this video really helped a lot. I’ll be going over to your Facebook group 💪🏾❤️
If I’m making a 30 oz tumbler … what kind of paper size would I need ? I just bought a Epson 2720 to convert into sublimation printer. I hope you can help.
Hello Jackie. Sorry for the delay you may have goote. The answer already. You would need 11x17 paper and a wide format printer to make it as one print. With your printer you will need to piece 2 pages together.
Thank you much I appreciate you well explained
Always Helpful, Thank You!!
Omg! You did that! I now understand!
Where can I find the purple butterfly design you show in the video
Can you link the video with print settings you referred to?
#replay first timer. Will this work when you work in Canva as well?
#playback Thank you!! Beautiful explanation and demonstration!!
Very helpful 🎉🎉🎉 thank you!
Can you help me get this straightened out, so I was doing my tumblers today and for some reason I printed out some pictures with the same size I’d been doing the others before when it printed the image was smaller in size I keep moving the image to get it to the right size and it doesn’t move everything was normal till I printed 2 other designs
Very Helpful. Thank you.
I just starting to do this and wondering where do I get the silhouette studio business edition you show here ?
Thank you so much!!!! I subscribed! ❤️❤️❤️
#reply thank you so much for all this ... im going to try it out. ive been having alot of trouble lately with resizing . i can not wait to try it this way
Im sorry i am a beginner an i cant understand how you even got to the screen you are on now. when i open it up all i see is a 12x12 mat. i can merge my pic an then i see them both. next i go to the rectangle box but nothing pops up to even put measurements up.. please help
Thank you for the video! I hope you know how this would this work in creative studio? Thanks
Do you mean for a Sawgrass printer? If so i do not use it to design. I just design in Silhouette Studio and use the print manager
@@SilaholicsAnonymous yes that is what I meant. I definitely want to try something more user friendly!
I appreciate you ❤
Awee Thank you. Glad to be of help to you
On business silhouette..is there a way to do the inflated look???
the warp tool if you have Designer Plus or Business may give you the results you are looking for
Good video thanks
Thank you. Just one thing. How do you mirror the image?
For sub i mirror in the print settings. Make sure you downloaded and installed the drivers
Thank you very much. This help alot
Subscribed, I am new to all this thank you. I love purple, where did you get the wrap?
I dont remember but it is either from Creative Fabrica or design bundles dollar deals
#playback Thank you, this was very helpful.
#replay...this is great!
#replay such great help
why does the width keep changing sizes when I type in your suggested width ??????
Replay!! I’m a cricut user, looking for a software to print my wraps…
Question: so we resize the image to the tumbler size, then create a “sheet of paper” (the size of paper we are using) and we rotate it and just set it over that “paper template… it doesn’t get attached or anything like that??
ANYONE ABLE TO HELP… MUCH APPRECIATED
Hello, you would do it exactly as outlined in the video. If there is a specific part that is not working for you once you try it out let me know and i can help figure out where the issue is.
@@SilaholicsAnonymous my issue was that it was tough to follow the look of your screen because you have Business version and I have basic… so it doesn’t look the same… I found someone else using Basic version and got it figured out!! Thanks so much
Can't use silhouette studio on a tablet or phone. Have to have a desktop pc or MacBook. Or it wouldn't let me on my tablet anyway.
Correct there is no mobile app version of the design app
Thank You!!
Omg this helps me
Thanks a lot 🤗🤗🤗🤗❤
Hello I have brought some wraps from etsy when i print I'm getting fine lines anyone know how to remove the lines please
My images still print blurry. Idk how to fix it. It looks crystal clean but after printed it’s not.
Question is it inches for sublimation
It is what ever measurement you use. If you use centimeters, then change it that unit of measurement in your design program. For these i used inches
Does this also mirror the image
I mirror in the print settings
Do you have a tutorial that show how to take a tumbler design and resize it for a mug?
Hi actually yes i did a video about switching up a template. You can't just resize it though. You will have to rearrange the design elements.
#Replay it was very informational
what kind of paper should I use?
Sublimation paper from Honestly SpINKing www.hsink365.com
What program are you using?
HELLO, On this channel i teach how to use Silhouette Studio. It is the program for the Cameo machine but you can design in it even if you dont have a machine. Just download from Silhouette America
I tried so hard to make this work. I was unable to drag and drop the image in the rectangle like you did. I'm angry, exasperated, and financially drained. All I wanted to do was make a tumbler. I can't understand why everyone else makes one in 15mins. I've been working on this for @ 30hrs. I've tried @ 15 different programs and thought your tutorial would be my saving grace. However clear your instructions are, I can't get the Silhouette program to do what you did. I currently have 6 different rectangles drawn everywhere, but can't get my pic into any of them. I just give up. My tumbler press is going in the trash. 😭
Do you have a Mac?
Are you willing to do a zoom class free right now?
I have a brand new HP Envy.....yes!
@allisonmcdade5030 email theprofessor@hsink365.com and i will send you a link
I will graciously accept any help you can offer. I'm just in tears and I feel so stupid
I can't find the video of the printer settings 😓
How can I change a tumbler size image to a 15oz mug size without loosing half of my image?
Unfortunately you can't
Can you help me mine doesn't look like your it has a cutting mat
i have my machine set to non since it is not needed for sub click the top icon on the right and where it say machine go to none on the drop down
What software is this?
Silhouette Studio. a free program you can download from silhouetteamerica.com
What do i download to edit the size
How can I resize a 20oz wrap to a 12oz wrap?
20oz and 12oz are not proportionate in size so you will either distort it or lose part of your image when resizing if it is a flatten jpeg/png file.
If you are using a layered file you can manually resize all the elements to the new size
Thank you ..I'm just learning how to do this so I'm a virgin..lol
Very good video but why are you using copyrighted images? Those companies will come after you if you sell these tumblers.
Who said that she was selling them? I am pretty sure she knows what not to do. I used to work for the Copyright Office.
Who says she did buy them? Once she buy them off a website she can
I followed the tutorial but I can’t get it to crop?
Did you have both the rectangle and image selected?
What happened when you cropped?
#replay 🧡
Replay
#lovethereplay
❤️❤️❤️❤️❤️
i cant get my tumbler measurements to print out correctly
Are you using a PC or Mac?
#replay
I can't grab my image without creating another box.
Go to the arrow in the left hand corner and cl8ck on it.
#Replay 👍🏾
#Replay 👋🏿
#playback ty
Subscribed #replay
#playback
replay
#Replay
Great video but just too much talking before getting to the point
You talk too fast
Hello and Thank you are watching. Could it just be that you are just new to Silhouette Studio and not familiar with the program so trying to follow in real time is a bit difficult for you? We recommend watching 1st to get an understanding and then watching and pausing in between the steps so that you can try them on your own and take notes.
In TH-cam video we cant pause to wait and allow for viewers to catch up however we do teach like that in our paid classes where we have more time.
#replay
#replay
#replay
#replay
# replay