Morgan I have a 1999 300 KTM EXC. I have had nothing but trouble with the magura slave cylinder. I have replaced it with a recluse nonadjustable slave cylinder. It uses the Magura oil. I hope that the recluse will ring and seal will not blow out with the magura Oil!
@@highlandcycles hi!! th-cam.com/video/_Xacjq9J994/w-d-xo.html in this in video minute fifteen you show the stator of the motorcycle, I have the same and I need to know the value of the coil between the red with white and black with white wires, sorry if my english is bad, thanks again
Morgan I have a 1999 300 KTM EXC. I have had nothing but trouble with the magura slave cylinder. I have replaced it with a recluse nonadjustable slave cylinder. It uses the Magura oil. I hope that the recluse will ring and seal will not blow out with the magura Oil!
It should be fine as long as it’s only had the magura on it.
@@highlandcycles thank you Morgan!!!! I love this old girl! She still runs good!
Where can i buy a new piston or gaskets for the piston? KTM SX65 rekluse clutch
hey mate i’ve got that exact clutch slave but can’t find it for sale anywhere
The rekluse one??
My rekluse slave kit is taking too long to receive. I went to the hardware store and got two 1/16 x 1" orings for $1.10 and they work without leaking.
that adjuster is a great idea, shame the brembo does not have it.
Totally
Hi! How are you?
can You tell me the value in ohm between the red and white wire
and black with white!
Thank you so much!
What bike?
@@highlandcycles hi!!
th-cam.com/video/_Xacjq9J994/w-d-xo.html in this in video minute fifteen you show the stator of the motorcycle, I have the same and I need to know the value of the coil between the red with white and black with white wires, sorry if my english is bad, thanks again
KTM'S , Those things have more problems than a Leopard has spots. LOL
Hahahahaha
maybe yours does....mine rocks!
I ordered that same kit and they didn’t send me the dam Piston. !! I paid $60+ for just a couple of o’rings and gasket !
That sucks. I’d call them. It could have been a mistake
@@highlandcycles so after you installed it did you use Dot 4 ? Dot 5 or mineral oil
@@johnnygalvan1344 DOT 4
Take that hammer away from Zach, he is not a carpenter.
Haha