Une vidéo très explicative sur la conception et les matériaux utilisés pour cette scie sabre Parkside performance 20 volts. Côté électrique ce n'est pas bien compliqué le système de maintient de la lame est satisfaisant pour un changement rapide et sans outil. Maintenant concernant la fameuse pièce oscillante qui a été redressée je doute de sa résistance dans le temps vu qu'elle a subit un sérieux dommage si seulement elle avait été en acier trempée cela aurait convenue. La vidéo en elle même est très intéressante je ne me suis pas amusé à compter le nombre de pièces qui la compose mais chaque détail est représenté c'est un travail formidable. Je me demande quelle aurait été le coût de cette pièce oscillant si elle avait été en acier trempée ? merci à toi beau boulot !
Great Video! I have such a saw coming...special offer, 20EUR new! Will do the greasing maintenance and also the extra washer trick right from the start. Thanks a lot for showing this and hats off to your ability to fix the bend and broken part.
Thank you so much! I have a newer Performance model and I JUST FIXED IT, thanks to your video. I did not have the exact same problem, but the problem was at the same place, a screw loosened and it did not allow the rotation.
Thank you so much for this very informative video, good to see that they used several bearings in this saw and that the important part are made out of aluminum. Subscribed and looking forward to watch your other video's 🙂
Hola un amigo me ha dejado misma sierra a ver si se la puedo arreglar , pero no he podido sacar los tornillos Dices en tu video son Philips ? No tengo soldador electrodos se puede arreglar a martillazos en frío o es por algún motivo que antes lo calientas con el soplete ?.
Hi! Thank you for the video. My sawblade is very lose in the holder on the device. tested it with a few other blades but all are very lose. You can swipe a 250mm blade ~2cm at the top. normal?
I killed this machine the first time I used it. I think it is a failed model. It is necessary to saw very accurately so that the saw blade is not pressed.
Good evening, I follow her from time to time here on her TH-cam channel. Congratulations on her skill. In the meantime, I apologize for the quality of my English but it is obtained with Google Translate. I am writing to ask you for advice as it is not specified in her videos. I would like to know what kind of grease you use to grease your power tools. Many recommend molybdenum disulfide black grease, while high performance lithium grease is recommended. I have seen that you use a lighter fat, on the yellow color: what type is it? The grease I would like to purchase is used to grease the gears of the following power tools: 1) bevel pair of electric angle grinder (220 volts); 2) electric drill gears (220 volts and 20 volts); Thank you. Emilio
Use Lithium or calcium based bearing grease used for cars and trucks "Top 2000" a very green type of bearing grease is what I used successful on many power tools. Only when gearing is lots of plastic gears, you should not use any lubricant with molybdenum as it is very hard powder nano material that hurts plastic pieces on the surface, I have seen such damage so lithium bearing grease for high speed application in cheap tools is goodd
Nice to know you bro. Wish you all the best and i support you that is great job that you are doing well done and hope you are successful in all of your life
Essa peça que entortou acho que não existe pra reposição e também tem um erro vde engenharia aí que o eixo que movimenta ela é mais baixo forçou ele escapou
Alla fine hai aggiunto una rondella di spessore , a questo punto conviene effettuare una modifica ora che è sana affinché non si verifichi lo stesso guasto , giusto?
No all steel and ball bearing so quality is very good.. You can have plastic bushing and gears on cheap tools and breaking, park side does not use plastics gear
@@zana3587 Hello, never more tools from this manufacturer, because very poor quality metal in gears and saws. Good for DIY enthusiasts, but prefers branded tools for professional work
ciao sono franco ho il medesimo gattuccio si è rotto il porta lama o aperto come nel video era si è rotto il perno e ho perso le sfere che diametro sono ? quanto è lungo e che diametro è il perno ? ciao
Une vidéo très explicative sur la conception et les matériaux utilisés pour cette scie sabre Parkside performance 20 volts. Côté électrique ce n'est pas bien compliqué
le système de maintient de la lame est satisfaisant pour un changement rapide et sans outil. Maintenant concernant la fameuse pièce oscillante qui a été redressée je doute de sa résistance dans le temps vu qu'elle a subit un sérieux dommage si seulement elle avait été en acier trempée cela aurait convenue. La vidéo en elle même est très intéressante je ne me suis pas amusé à compter le nombre de pièces qui la compose mais chaque détail est représenté c'est un travail formidable. Je me demande quelle aurait été le coût de cette pièce oscillant si elle avait été en acier trempée ? merci à toi beau boulot !
Интересный ремонт! Инструмент разрушителя!! Спасибо за поучительное видео!
спасибо, сэр, я надеюсь, что это полезно для вас
Thank you. I am following you from Iraq and I hope to learn more from you about maintenance
Thank you. you welcome sir
Great Video! I have such a saw coming...special offer, 20EUR new! Will do the greasing maintenance and also the extra washer trick right from the start. Thanks a lot for showing this and hats off to your ability to fix the bend and broken part.
I was impressed that you managed the feat with gloves to handle stones or bricks,without any sensitivity in the fingers
ok
U make it seem so simple, while it is not! Thanks for sharing and giving us your knowledge!
Thank you so much! I have a newer Performance model and I JUST FIXED IT, thanks to your video. I did not have the exact same problem, but the problem was at the same place, a screw loosened and it did not allow the rotation.
thank you sir i hope it's helpful for you
As always, a superbly made video and very instructional. Thank you.
thank you sir
Great job from you! Parkside Cordless Sabre Saw is a great tool, I really like it.
thank you sir, me too
I love these Parkside tools. Nice video!
Thank you, me too
Thank you so much for this very informative video, good to see that they used several bearings in this saw and that the important part are made out of aluminum. Subscribed and looking forward to watch your other video's 🙂
Fine work my brother. We miss your great videos.
thank you my teacher, i miss your video too
A very good job. It's useful to know what has broken. I don't have the equipment to weld the piece, so will look for a spare part on-line. Thank you.
Achou a peça ?
@@robertonicolosipiva2646 Não, não consegui encontrar nenhuma peça assim à venda, então me arrisquei e comprei uma nova!
@@paulbradford8240 tá cada vez mais difícil sem peças k valeu
It is good you show how to repair Parkside tool because every Parkside tool I ever bought, broke in a few days.
thank you sir, broke in a few days!! it's not a good quality but it's not too bad
Maybe you don't know how to use tools. I have a few Parkside tools as well, and all of them are still working.
@@DashCamSerbia Ha Ha That is really funny.
Very nice job, wish I had that kind of patience
thank you
Очень познавательно.Спасибо за видео!Приятно смотреть за работой мастера.
Спасибо, сэр
@@zana3587;;;;;;;;;;;;;;; ⁸
@@zana3587 jjíjíjjjjjjjjjjjjj8jjjjjjjjjjjjjj8
@@zana3587 😊p😊ooo😊op😊po😊😊😊ooooi😊i😊opo😊ooo😊kpoo😊oppikppo😊ioooppooooopooo😊pop😊opoopooii😊opoo😊oppo😊😊ppoipooip😊😊😊😊oii😊ooko😊oooooipiooooopooopopoppooooi😊opooopo😊o😊oioooipioo😊ipooo😊oooooipiooooo😊iko😊opo😊kko😊koooooiooooooooppooiopo😊pooipoo😊kkokooooopoo😊😊ppooooiiopoppokooppooko😅😊ok
@@zana3587 po
EXCELENTE, GRACIAS. Un tutorial perfecto, paso a paso y con todo detalle.
gracias Señor
ده سته کانت خوش زور جوانه
بةريزى برام
Hola un amigo me ha dejado misma sierra a ver si se la puedo arreglar , pero no he podido sacar los tornillos
Dices en tu video son Philips ?
No tengo soldador electrodos se puede arreglar a martillazos en frío o es por algún motivo que antes lo calientas con el soplete ?.
Hi! Thank you for the video. My sawblade is very lose in the holder on the device. tested it with a few other blades but all are very lose. You can swipe a 250mm blade ~2cm at the top. normal?
I killed this machine the first time I used it. I think it is a failed model. It is necessary to saw very accurately so that the saw blade is not pressed.
we miss you man
Thank you sir
أحسنت العمل أستاذي استمتع بمشاهدة فديواتك الجميله👍👍🌹
اشكرك اخى العزيز
Good evening,
I follow her from time to time here on her TH-cam channel.
Congratulations on her skill.
In the meantime, I apologize for the quality of my English but it is obtained with Google Translate.
I am writing to ask you for advice as it is not specified in her videos.
I would like to know what kind of grease you use to grease your power tools.
Many recommend molybdenum disulfide black grease, while high performance lithium grease is recommended.
I have seen that you use a lighter fat, on the yellow color: what type is it?
The grease I would like to purchase is used to grease the gears of the following power tools:
1) bevel pair of electric angle grinder (220 volts);
2) electric drill gears (220 volts and 20 volts);
Thank you.
Emilio
thank you sir , me too
Use Lithium or calcium based bearing grease used for cars and trucks
"Top 2000" a very green type of bearing grease is what I used successful on many power tools.
Only when gearing is lots of plastic gears, you should not use any lubricant with molybdenum as it is very hard powder nano material that hurts plastic pieces on the surface, I have seen such damage so lithium bearing grease for high speed application in cheap tools is goodd
@@kitecattestecke2303 Many thanks for the suggestions
ده ست خوش فديو كانت زور زور به سوودن
زۆر سوپاس بەرێزی
Nice job. I have this tool. Still working.
good sir
Gran bel lavoro e Grande manualità👍👍👍
grazie Signore
Thanks for the mastery🙏🙏🙏
thank you sir
Благодарю! Интересное видео.
При пилении металла можно ножовочное полотно смазать каким-нибудь маслом?
Nice repair well done .
Thank you sir
Good job! Thanks for sharing.
The only thing that sucks about it is the brushed motor but they fixed that in their performance version!
Thanks for your effort. Excellent work as always...
thank you sir
@@zana3587 You're welcome.
Hola, esa pieza que has enderezado con calor, dónde se compra, a mi se me ha partido justo en la parte estrecha, gracias
An amazing job, well done,👍.
thank you sir
Спасибо, мастер!!!
I'm pretty sure this part with the long hole in it, was hardened before. Like this, it won't last for long.
دە ستە کانت خۆش بن یاربی هە ر بژی کوڕد
زۆر بەرێزی
Are you a kurdish guy...
I proud of you man
I was surprised to see your videos
Great job and go on man
Wish you all the best
yes sir i am kurdish . thank you
Nice to know you bro. Wish you all the best and i support you that is great job that you are doing well done and hope you are successful in all of your life
محتوي ممتاز
شكرا لك اخي الكريم
اشكرك اخي العزيز
Nice to see another video 👍
Thank you good man , i haven't seen you a long time , are you good
@@zana3587 very sick, 2 heart attacks, diabetes
it's a bad news, i hope you get better soon my best friend
Essa peça que entortou acho que não existe pra reposição e também tem um erro vde engenharia aí que o eixo que movimenta ela é mais baixo forçou ele escapou
Alla fine hai aggiunto una rondella di spessore , a questo punto conviene effettuare una modifica ora che è sana affinché non si verifichi lo stesso guasto , giusto?
دەست خۆش سەرکەوتووبیت.
بةريزيت براكةم
Hi Great Video does anyone know where I buy a motor for it "parkside speedmaster rs785-20v"
Was it out of warranty?
yes sir
NOTA MÁXIMA, EXCELENTE TRABALHO
obrigado senhor
@@zana3587 eu é que agradeço por partilhar tanto saber através dos seus vídeos. Um abraço
parkside is from which country

lidl , germany
@@zana3587 thanks for replying, I'm following your channel and I intend to wind a rotor
can you change it for a brushless motor
no idea sir
Les roulements sont de mauvaise qualité ? Merci bonne vidéo 👍
merci monsieur, le roulement est bon
No all steel and ball bearing so quality is very good..
You can have plastic bushing and gears on cheap tools and breaking, park side does not use plastics gear
U the MAN!
اشتقنا لفيديوهاتك يا كابتن
اشكرك معلم . انت المعلم
تحتاج اضاءة اقوى بالورشة حتى يبين الفيديو أوضح
اشكرك
Good work
Thank you sir
Здравствуйте,а какую смазку вы используете?
любой вид, но хорошего качества
@@zana3587 спасибо!
THANKS GREAT JOB
thank you sir
Nice job , but no more parkside tools !!!
Thank you sir . Why?
@@zana3587 Hello, never more tools from this manufacturer, because very poor quality metal in gears and saws.
Good for DIY enthusiasts, but prefers branded tools for professional work
Tutti i tuoi strumenti dà lavoro sono della Parkside? Perché vedo che ripari solo quell modellò.
no signore, aggiusto un altro tipo di strumenti
Complimenti per tutto il lavoro che fai
Bravo 👏
Bzhet u sarkawtu be wasta gyan
Supast dakam bram
Slaw bra, commutator la kwe hawler dast dakawe?
slaw . ta estra la haeler namdewa . tanha datwane armechare shkaw sode le wargre
ciao sono franco ho il medesimo gattuccio si è rotto il porta lama o aperto come nel video era si è rotto il perno e ho perso le sfere che diametro sono ? quanto è lungo e che diametro è il perno ? ciao
very nice
Thank you bro
👍 👏👏👏👏 👋👋
Thank you sir
Good joob
thank you sir
Вот это SUPER
Спасибо, сэр
BRAVO MESTERE SUCCES
thank you sir
как вы считаете это плохой инструмент или он соответствует цена качество
это соответствует цене качество, я думаю, что это
Very good
Thank you sir
👍🏽👍🏽
Thank you
✌🌺✌🌺
thank you sir
🌹🌹🌹🌹
thank you sir
09:10 it would be better with TIG
5+
See to x2 speed
not understand sir
Ein absoluter Profi am Werk 💪💪😍😍👌👌th-cam.com/video/Rv8j8u7I6c8/w-d-xo.html
Der Müll von Lidl 🤢🤮🤮🤮
Nicht so schlecht