ADA Racing Goped Big Foot Lock down kit install and over view.
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Here is a quick video of the install process of the ADA racing 3rd bearing engine mount and the lock down kit. It has been 10+ years since I’ve installed one. I hope this helps anyone looking into installing this kit.
very helpfull ive watched a few times now i am installing my 3rd bearing and lockdown kit tomorrow on the same exact go ped along with a 750 black magic spindle thanks for videos keep up the good work my friend
@@drippinginswag I’m glad I could help!
sweet video! recently got a bigfoot and looking to do some upgrades
Great video, step by step install. Right on, Thanks 👍🏼👍🏼
Thanks for watching! Thanks for the support!
Awesome video. Please make more 🙏
I have my camera back out I have a few videos to edit and upload! Thanks for the support
Aaron, is the a special spindle needed for the ADA 3rd bearing? I ordered the “long spindle” recommended by DDM and it’s really short, and only extends 1/2 way across the rear tire. My previous spindle extends almost completely across the tire. Can’t I just reuse that?
Did you order a long drive spindle for a sport or big foot? They are different. You need to order the one specific for the Ada 3rd bearing.
@@aaronpratt89 I think that was it. I confused my order and got a sport spindle. 🤦🏻♂️
Thanks
Great videos man. You jave any going over how to properly dial in 1st gen bigfoot brakes??
Thanks! That’s a great video idea!! Once I’m filming again I’ll make one about the pre mad dog breaks!
@@aaronpratt89 That would be awesome. I need help as well.
Thanks for the videos! We’re you able to tighten the bolts on the lockdown all the way? Mine seems to be bottoming out
Will the ADA 3rd bearing motor mount work with the factory frame spring? I’m considering just upgrading the motor mount and using the cable to still lift the motor off the tire. .
I believe it will! The motor mount has a place to mount the original clutch cable also.
Hi friend! I have a cable with a torsion spring on my Goped Bigfoot scooter.
Can you please make a video showing the installation of the motor torsion spring?
Hi just changing over my daughter's bigfoot to an ada 3rd bearing and lockdown the motor mount screws are tossed so what type of Allen head did you use also installing the ada clutch system as well
Off the top of my head I do not remember. I think they were 6x1.0 thread. I can not remember the exact length either. I’m between houses at the moment and my shop is packed up. I do know my local Lowe’s had a metric Allen selection and that’s where I bought them. If you take the screws with you you should be able to match them up. I wish I had more information off the top of my head for you!
What pipe is that? It looks nice and compact. . I’m looking to replace my X-Can.
The exhaust is made by jet pro
So if I correct the lock down kit makes the goped into a push start? Been wanting to do this upgrade for some time now
@@esi178y6 yes it makes it direct drive! Just like a sport!
Hey Aaron I just got the 3rd bearing and lockdown kit installed. Great video BTW. And what are you running for tire pressure in the rear tire
40+psi
Awesome man thanks for the info
Where can I get this kit from trying to make my goped super bigfoot faster and more reliable and websites for aftermarket parts and upgrades thanks
ddmracing.com
Thanks 👍
Welcome 👍
this video helped a lot. Thanks man. also is that a Philly accent? haha I heard “mehwter” instead of motor lol
Baltimore lol
How do you tune the walbro carb for start it my ped pops but won’t start what do I do
Do you mind listing links to all of the parts for this mod?
www.ddmracing.com/ADA-BF-SBF-3rd-Bearing-Support-GPBFBSK
www.ddmracing.com/ADA-Posi-Lock-Bigfoot-Lockout-GPBFBSKL8
Hi, thanks for your videos. Great stuff! a bit of help please, I have a standard Bigfoot and lost the motor tension spring on the back. Could you give dimensions for it so I can buy one here in Portugal? Cheers
www.davesmotors.com/Bigfoot-Engine-Mount-Spring-8017?sc=12
Wouldn’t it be better to have bearings on both sides of the spindle?
Yes. But this is how it is designed. The third bearing support for the sports is a support on the other side of the spindle.
This good to see I was told the lock out won’t work on a Bigfoot where did u get the kit?
The kit of manufactured by Ada racing for the big foot! I ordered mine through ddmracing.com
I have a bigfoot all stock. No motor want to get a new one and Ada setup where do I get one and how big of a engine will fit or should I keep it stock?
I highly recommend the lock down kit. Ddmracing.com sells everything you need.
Best bang for your buck is the G290RC.
What about the clutch set up do they work ? Then no more cable clutch would that be the best set up ?
@@derrickwhite5543 use the lock down. It gets did of the clutch and makes it direct drive. The problem with the clutch is when the scooter reaches max speed, the engine looses spindle to tire pressure. With the lockdown you have perfect tension all the time. Down side is you can no longer idle at stops.
@@derrickwhite5543 the centrifugal clutch setups rob a decent amount of power. Too much added inertia for the little engines. The best set up is direct drive for the Bigfoot and sport applications.
What raio do u put mixture
32:1, 4oz of oil per every gallon is gas.
And how do you bump start it can you bump start it with all go ped engine what if its got a pull start
Does the bigfoot already have 3rd bearing Installed?
Whatkind of spindel do I need just have the 3rd bearing
You need one for the Ada racing 3rd bearing. Ddm racing sells them.