TURBO B20 VTEC engine swap EG civic HSG EP. 4-06

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 260

  • @jeissonbermudez4422
    @jeissonbermudez4422 8 ปีที่แล้ว +7

    the best part of the vid is all yall jus workin on a buddies car n jus chillin....thats what the tuner life is all about

  • @michaelc5019
    @michaelc5019 8 ปีที่แล้ว +16

    Hope whoever was driving, if it was being driven when hit, is ok. I know most of you guys have families. Stay safe, keep building and filming brothas

  • @1HeavyWrench
    @1HeavyWrench 8 ปีที่แล้ว

    Little tip.... When filling the radiator remove the return hose from the heater core and when coolant starts coming out the system is properly burped.

  • @EdwardAlcala
    @EdwardAlcala 8 ปีที่แล้ว

    The carbon fiber trunk does the car so much justice, awesome video as always

  • @HondaStreetGarage
    @HondaStreetGarage  8 ปีที่แล้ว +6

    The new episode part2/the resurrection is coming soon!

    • @ichiebutt187ify
      @ichiebutt187ify 8 ปีที่แล้ว

      yea that Def sucks. .

    • @Tnez_uklan
      @Tnez_uklan 8 ปีที่แล้ว

      is that fire 105 radio station

    • @ghostperformance801
      @ghostperformance801 8 ปีที่แล้ว

      what kind of exhaust is on there and what headers do you have on the white Eg with carbon duck lip

    • @andreserazo8941
      @andreserazo8941 8 ปีที่แล้ว

      I lake ur show

    • @adriannacin0671
      @adriannacin0671 8 ปีที่แล้ว

      I have a eg sedan with a Frankenstein build. where can I get a good turbo setup at? or what site?
      would greatly appreciate it if you reply back. 🙏

  • @thomashamilton9046
    @thomashamilton9046 7 ปีที่แล้ว

    man i wish i had a shop like you guys you guys are living the life. i need to boost my gsr asap

    • @gnarlytek1331
      @gnarlytek1331 7 ปีที่แล้ว

      Thomas Hamilton
      Facts.need one,want one, gotta have one.

  • @donkeybizle
    @donkeybizle 8 ปีที่แล้ว +23

    The end got me..

  • @YETDS.development
    @YETDS.development 8 ปีที่แล้ว +1

    Thank you for the nice HODA VTEC videos! !
    From Japan it is 19 years old who are studying in this channel!
    I have riding on the S2K. Please do its best from now on! !
    And Thank you for dealing with the car of Japan!

    • @HondaStreetGarage
      @HondaStreetGarage  8 ปีที่แล้ว

      Thank you! I love Japan! Hope to travel to Japan soon!

    • @YETDS.development
      @YETDS.development 8 ปีที่แล้ว +2

      Thanks for quick reply!
      I'm sorry the English dub; (
      Yes, Japan is a place good! Please go by all means enjoy: D

    • @saoodrrrsaood1009
      @saoodrrrsaood1009 8 ปีที่แล้ว +2

      +Honda Street Garage I have crx in dubai I want put b20b it's ok

  • @Brock_Landers
    @Brock_Landers 8 ปีที่แล้ว

    As always, awesome episode, damn shame about the car. RIP to yet another clean EG hatch. Can't wait to see the replacement. Rock on guys!

  • @mccoyhanson970
    @mccoyhanson970 8 ปีที่แล้ว

    @Honda Street Garage your civics are so clean down there!!!!

  • @20cnaf
    @20cnaf 8 ปีที่แล้ว

    that white civic is sick! Great stance on it.
    Not over the top, just clean as.

  • @vboy1212808
    @vboy1212808 8 ปีที่แล้ว

    OK thank u so much for the info yeah hopefully get to turbo mine soon that hatch looks beast with that turbo

  • @LNP_Garage
    @LNP_Garage 8 ปีที่แล้ว

    Nice work HSG....Sucks what happen to the car. Cant wait to see what shell the b20v is going into.

  • @dz8d4z
    @dz8d4z 8 ปีที่แล้ว

    wow al that wonderful work i feel bad for the customer., guys please keep producing videos

  • @intheworkseg6
    @intheworkseg6 8 ปีที่แล้ว

    was the white car at HDays in Charlotte last year? Looks familiar

  • @vboy1212808
    @vboy1212808 8 ปีที่แล้ว +4

    Hi am a big fan of your folks channel and videos I have a same year eg hatch with a b20z2 block with a type r head wanted to know wat kine of turbo kit u got this hatch that is in this video if u don't mine ?

  • @solidsnakec20
    @solidsnakec20 8 ปีที่แล้ว +4

    whats that electric tool called? gotta get me one of those

  • @BroJustGoogleIt
    @BroJustGoogleIt 8 ปีที่แล้ว +3

    I love this channel. you inspired me to actually buy a Honda

    • @IntegraDIY
      @IntegraDIY 8 ปีที่แล้ว +1

      Do it, you'll love it

    • @BroJustGoogleIt
      @BroJustGoogleIt 8 ปีที่แล้ว

      Integra DIY I did bro it feels like a fucking go cart 😂

    • @IntegraDIY
      @IntegraDIY 8 ปีที่แล้ว

      +Evan Is Evan nice! What did you scoop up?

    • @BroJustGoogleIt
      @BroJustGoogleIt 8 ปีที่แล้ว +1

      Integra DIY I got a 2000 civic ex 5 speed. 109xxx miles

    • @IntegraDIY
      @IntegraDIY 8 ปีที่แล้ว +1

      +Evan Is Evan pretty sweet bro, I was going to suggest a b16 swap but it's a newer 2000, low miles and 5 speed it's already a nice car. Just enjoy and choose your upgrades wisely

  • @jorgeduarte421
    @jorgeduarte421 6 ปีที่แล้ว

    friend I like to see your videos very much you know I have a question and I hope you answer me I have a Honda Accord 2002 automatic and already has some miles and runs well thebproblem is when something high on the traffic light and the high minotor starts to live and same as when I turn on the heater it trembles and I do not find the problem and I do not have the light of the cheker engier on I hope you answer my question thanks

  • @wildmael
    @wildmael 8 ปีที่แล้ว

    chill nation mix? nice job on the swap

  • @1siccej
    @1siccej 8 ปีที่แล้ว

    great videos.. how come the engine was taken out of the white ej coupe?

  • @arj134
    @arj134 8 ปีที่แล้ว +2

    question for all what are your thoughts on an h22 swap into a 1995 civic hatchback?

    • @hipowergarage4256
      @hipowergarage4256 8 ปีที่แล้ว

      do it make sure its h2b build. easily do 240hp all motor man , have a 99 ek with a h2b in it

    • @arj134
      @arj134 8 ปีที่แล้ว

      +Erik Ureña okay thanks for the support !

    • @hipowergarage4256
      @hipowergarage4256 8 ปีที่แล้ว

      +arj134 really fast when done right . we have a h2b ek all motor with a gsr transmission . on proxes. we take b20v turbo and last time we took a corvette . but make sure you reinforce the drive side motor mount cause that always snaps man

  • @EDWARDTREVEY
    @EDWARDTREVEY 8 ปีที่แล้ว

    You guys made that look so easy... I love it but I am crushed you didn't get to run that car like it needed to be RUUUNNN !!!

  • @desertfox4273
    @desertfox4273 8 ปีที่แล้ว

    love the channel, wish you guys did more k series videos?

  • @donaldhastyjr4066
    @donaldhastyjr4066 8 ปีที่แล้ว

    Where did you get the carbon fiber trunk lid on the white EJ?

  • @blackjesuz823
    @blackjesuz823 8 ปีที่แล้ว +1

    love this channel

  • @carlosnieto2574
    @carlosnieto2574 8 ปีที่แล้ว +1

    if ya put the car on dolleys when you are putting in a motor, you just move the car instead of the cherry picker and its so much easier and quicker, imo. then ya can just use a pulley from an I beam or my favorite an old swing set.

  • @dannyDC2
    @dannyDC2 8 ปีที่แล้ว +1

    What a bummer at the end. Great video though!

  • @boostedef89
    @boostedef89 8 ปีที่แล้ว +16

    Big FUCK!!! at the end but it was a great video 👍

  • @timm5970
    @timm5970 6 ปีที่แล้ว

    Hey that auto to manual mount you have is interchangeable for d and b series? Will a civic d series mount work in a bseries? I made a custom one plate to put the trans in but I want a clean mount

  • @gilbertsantiago2921
    @gilbertsantiago2921 6 ปีที่แล้ว

    Hey were it’s your shop?? I planing to swap my d16y8 to gsr engine ! I’m at Raleigh nc

  • @billyvillalona5853
    @billyvillalona5853 8 ปีที่แล้ว

    hi I got a honda civic eg I want to swap with a b20 engine but idk what type of transmission I need

  • @beersforyearsTM
    @beersforyearsTM 8 ปีที่แล้ว

    no new wiring harness needed ? or did i miss that ?

  • @MadMedeiros
    @MadMedeiros 8 ปีที่แล้ว

    this is so random but what flooring is that in the garage? I want it

  • @predator19801
    @predator19801 8 ปีที่แล้ว

    Hi do you guys share advice? I've a 2000 civic that has a d14 engine in I've got a b18c4 engine conversion to drop in but I had to source a obd2b wiring loom for the car, do you guys know of any wiring loom diagrams you could point me to cheers, fan from england

  • @537R4HC
    @537R4HC 7 ปีที่แล้ว

    is that a top mount cast iron manifold?
    how is it? u get a problem like oil return? clearance? or any fitment issues?

  • @nikkelgerman6461
    @nikkelgerman6461 8 ปีที่แล้ว

    that trunk lid tho
    i luv what these people do 4real 4real

  • @somebodyepic4
    @somebodyepic4 8 ปีที่แล้ว

    damn that sucks,can't wait to see the new swap video

  • @blueandblacknija
    @blueandblacknija 8 ปีที่แล้ว

    i have the same car and this is the swap i wanted . THANK YOU FOR THIS

  • @sponsored_hobbies8233
    @sponsored_hobbies8233 6 ปีที่แล้ว +1

    Wow, that is fu king crazy how were yall not mad?

  • @DirtyGarageTx
    @DirtyGarageTx 8 ปีที่แล้ว

    What kind of rims are those in the white coupe

  • @narciso19G
    @narciso19G 8 ปีที่แล้ว +1

    Damn that suck. That car sounds amazing though, nothing beats the sound of a turbo spooling.

  • @dhestondh
    @dhestondh 8 ปีที่แล้ว

    this may be a dumb question but why don't you use a timing belt cover??

  • @upperpdx1784
    @upperpdx1784 8 ปีที่แล้ว

    great video as always

  • @CaliBreeeze
    @CaliBreeeze 8 ปีที่แล้ว

    Love these videos pls keep em comming! Peace

  • @joseestrada2435
    @joseestrada2435 7 ปีที่แล้ว

    Is that engine still running ? Just asking since I thought Nippon pistons were a "cheap" brand

  • @jkspacely
    @jkspacely 8 ปีที่แล้ว +5

    Who makes the carbon trunk on that white ej1

  • @chrisreyes1556
    @chrisreyes1556 7 ปีที่แล้ว

    do u know where can I find a ecu for my car that I will put a turbo in

  • @dejavudogg
    @dejavudogg 8 ปีที่แล้ว

    is that a storage unit where yall do yall work?

  • @chris010281
    @chris010281 8 ปีที่แล้ว

    I would love to have a garage that that my misses would never see me again

    • @chris010281
      @chris010281 8 ปีที่แล้ว

      Great video but sad ending :-(

  • @OG-Malinali
    @OG-Malinali 8 ปีที่แล้ว

    I would love for y'all to do some engine work on my Honda where are y'all located?

  • @KarsUpGraders
    @KarsUpGraders 8 ปีที่แล้ว

    Hey H.S.G guys nice work

  • @marcusperez304
    @marcusperez304 8 ปีที่แล้ว

    hey i just subbed and i have a question i want to make a swap but idk wt b18 model to go

  • @victorargueta4560
    @victorargueta4560 8 ปีที่แล้ว

    Hey guys I was wondering if I was swapping just engines is it easier to pull the motor and trans then bolt my trans to the new engine and back in both at the same time
    Or take out just the engine and leave the trans in and bolt it to the trans in the car?

    • @HondaStreetGarage
      @HondaStreetGarage  8 ปีที่แล้ว

      Personally I feel it's easier to pull both at the same time and put back in at the same time. But I've done both and it's always a pain trying to connect the engine and trans while in the engine bay.

  • @christianarcos4333
    @christianarcos4333 8 ปีที่แล้ว

    what happen to small hands tim

  • @drizen1g
    @drizen1g 8 ปีที่แล้ว +1

    how does a 18 wheel destory the car already man that sucks.

  • @reddragonx8799
    @reddragonx8799 5 ปีที่แล้ว

    I'm trying to swap a engine in my Honda 2000 Civic coupe DX but i can't find Em1 shift link Em1 T-bracket Em1 post mount and swap mount i get a b20 but I don't have the other parts and I don't know what car I have to get them from can anybody help me thanks

  • @badtcat
    @badtcat 8 ปีที่แล้ว

    yo i love what u do to honda can you guys do f20b or h22a or k20 swap with a accord or civic

  • @chrisvillanueva1974
    @chrisvillanueva1974 8 ปีที่แล้ว

    what kind of rims were on that white eg coupe? (the chrome ones) SICK

    • @youpickle
      @youpickle 8 ปีที่แล้ว

      +Chris Villanueva CCW lm5

    • @reckemzz
      @reckemzz 8 ปีที่แล้ว

      the mesh ones?

    • @chrisvillanueva1974
      @chrisvillanueva1974 8 ปีที่แล้ว

      I was talking about the chrome rims that were on that white EG couple, apparently they're called "CCW lm5's"

    • @chrisvillanueva1974
      @chrisvillanueva1974 8 ปีที่แล้ว

      +Chris Villanueva what size rims are those CCW Lm5's, and what size are the tires?

  • @Flare_Pavilion
    @Flare_Pavilion 8 ปีที่แล้ว

    What's that small filter looking thing at 4:19

    • @so-lo1099
      @so-lo1099 8 ปีที่แล้ว

      Flare_Pavilion - respirator

  • @Teggy123
    @Teggy123 8 ปีที่แล้ว

    what type of electric tools did you use ?

  • @HDConcussionz
    @HDConcussionz 8 ปีที่แล้ว

    How long was the car going after the swap before it was wrecked?

  • @kanjotouge981
    @kanjotouge981 6 ปีที่แล้ว

    What model is the front bumper?

  • @stevepierce73
    @stevepierce73 8 ปีที่แล้ว

    What a damn shame :-(
    Were the rims on the EG (On the side that was hit) Salvageable at least?
    Love the vids by the way, great content, really wish there was a shop like yours where I'm at.

  • @ronnieronnie8549
    @ronnieronnie8549 8 ปีที่แล้ว

    wow great thanks guys. keep on making those vids

  • @kinghorsey08
    @kinghorsey08 5 ปีที่แล้ว

    It really took like 5 people to do one engine I legit did a b18a1 motor on a 1990 Acura integra ls change by myself with out a garage in less than 5 hours 😲

  • @runawayplz
    @runawayplz 8 ปีที่แล้ว

    what harness did you guys use or did y'all just put one together?

  • @adrianarteaga6275
    @adrianarteaga6275 8 ปีที่แล้ว

    what axles did you use for the swap?

  • @ColinGT
    @ColinGT 8 ปีที่แล้ว

    Did you swap engine harnesses ?

  • @bigstinky7671
    @bigstinky7671 7 ปีที่แล้ว

    Hey bro so this is a b20 block with a b16 head? I'm also curious if I do this swap with a turbo with low boost probably around 7psi can the stock block take it?

  • @zeus-io3hn
    @zeus-io3hn 8 ปีที่แล้ว

    that a lot of f... fun.
    cheers guys

  • @TheJalliam
    @TheJalliam 8 ปีที่แล้ว

    what the trunk on the white eg

  • @bossboii110
    @bossboii110 8 ปีที่แล้ว

    Are you guys selling the shell?

  • @vtecsk8r
    @vtecsk8r 8 ปีที่แล้ว

    Nice good video!! "That fart smelled like 6 year old skunk and spaghetti " bahahaha lmao!!

  • @1Egmonster
    @1Egmonster 8 ปีที่แล้ว

    u guys close to Chicago ??? need help with a swap

    • @HondaStreetGarage
      @HondaStreetGarage  8 ปีที่แล้ว

      Sorry we're pretty far from Chicago. We're located in South Carolina.

  • @colbytyree2592
    @colbytyree2592 6 ปีที่แล้ว

    Who is that trunk lid on the e.g. coupe Made by?

  • @marqueltoves6093
    @marqueltoves6093 7 ปีที่แล้ว

    What harness did you guys use?

  • @galaxy1113
    @galaxy1113 7 ปีที่แล้ว

    What motor mounts i need for a 93 eg hatch

  • @euroberto85
    @euroberto85 8 ปีที่แล้ว

    i subscribed a little while ago since i miss my honda a lot. keep up the good work and sorry about the car.

  • @smarshall5937
    @smarshall5937 8 ปีที่แล้ว

    Is that a regular stock exhaust?

  • @GuerreroDelInfo
    @GuerreroDelInfo 7 ปีที่แล้ว

    Woah you guys got a lady tuner in your garage? Is jessika already spoken for?

  • @xMrP1nkx
    @xMrP1nkx 8 ปีที่แล้ว

    hey man what shift knob is that?

  • @PharoahFPS
    @PharoahFPS 8 ปีที่แล้ว

    where are you guys located?

  • @ronnieronnie8549
    @ronnieronnie8549 8 ปีที่แล้ว

    how hard would it be for me to put my gsr into my 98 auto to manual Ek guys.

    • @HondaStreetGarage
      @HondaStreetGarage  8 ปีที่แล้ว

      Really not hard at all. You would just need the engine brackets from a 99 civic si.

    • @IntegraDIY
      @IntegraDIY 8 ปีที่แล้ว

      Yep, you'll need the t-bracket from a 99-00 em1. That's the only one that'll fit a b-series in any 6th gen. And I believe drivers side mount and bracket for b-series in the civic

  • @wesleybaez8938
    @wesleybaez8938 8 ปีที่แล้ว

    Hey man considering you guys know a lot about the Honda game I wanted to ask a question.. I want to run a b20z with a b16 head for vtec obviously but ive been hearing a lot that the b20 won't be very reliable with turbo.. I wanted to hear your input or anyone that sees this!

    • @HondaStreetGarage
      @HondaStreetGarage  8 ปีที่แล้ว +1

      The cylinder walls are relatively thin, hence the reason why using a turbo is frowned upon. But I've seen many b20/Vtec turbos be reliable with a block guard and rods. 7-10 psi should be fine as long as you let the block warm up before beating on it.

    • @h2bpilot358
      @h2bpilot358 8 ปีที่แล้ว

      Wesley Baez there alot of misinformation about b20vs my brother has a b20v turbo standard sleeve cp pistons rods of course personal best of 10.28@141mph tuned by Felix medina on 93 Oct it's all on the tuner gotta go with an experienced tuner

  • @Deathcore615
    @Deathcore615 8 ปีที่แล้ว +2

    what's the intro song?

  • @ronnieronnie8549
    @ronnieronnie8549 8 ปีที่แล้ว

    can i use anything from my dc2

  • @yeeerrrpp7081
    @yeeerrrpp7081 8 ปีที่แล้ว +1

    damn I really didn't see that coming

  • @veaceslavcoseru3008
    @veaceslavcoseru3008 8 ปีที่แล้ว +2

    name wheels?

  • @TheBeastFPV
    @TheBeastFPV 7 ปีที่แล้ว

    Why one head light

  • @skater21jlg
    @skater21jlg 8 ปีที่แล้ว

    how much it costs a b18 or k20 swap?

  • @bigdeebo20
    @bigdeebo20 7 ปีที่แล้ว

    Where are y'all located in sc

  • @mrsquishyboots
    @mrsquishyboots 8 ปีที่แล้ว

    with forged internals I would expect more than 12 psi of boost.

    • @josearellano2800
      @josearellano2800 8 ปีที่แล้ว

      mrsquishyboots maybe he prefers reliability

    • @mrsquishyboots
      @mrsquishyboots 8 ปีที่แล้ว

      good point. I have a m20b27 bmw engine at 10 psi. stock internals. I can see it blowing up soon lol.

  • @npofeccop
    @npofeccop 7 ปีที่แล้ว

    Excellent channel, great vidos! Well done guys
    p.s. Honda is the coolest of all))))

  • @dabeardsmen3621
    @dabeardsmen3621 8 ปีที่แล้ว

    That white coupea THO!!!

  • @TheStr8lunatik
    @TheStr8lunatik 8 ปีที่แล้ว

    how soon after that last frame did it get hit?!! wtf happened?

    • @HondaStreetGarage
      @HondaStreetGarage  8 ปีที่แล้ว

      It was about a week later. 18 wheeler took a wide turn at a light, it caught-dragged him.

    • @TheStr8lunatik
      @TheStr8lunatik 8 ปีที่แล้ว

      Damn!

    • @TheStr8lunatik
      @TheStr8lunatik 8 ปีที่แล้ว

      Well I enjoyed the resurrection video, thank you!

  • @IplayInSD
    @IplayInSD 8 ปีที่แล้ว

    what spoiler was that on the coupe??

    • @illuminate3473
      @illuminate3473 8 ปีที่แล้ว +1

      not a spoiler

    • @yoshiD15
      @yoshiD15 8 ปีที่แล้ว

      yeah it looked like a carbon fiber trunk with that style. looks nice

    • @steffenflindt8670
      @steffenflindt8670 8 ปีที่แล้ว

      csl style carbon trunk

  • @christittle6661
    @christittle6661 8 ปีที่แล้ว

    Omg that fuckimg sucks!!! To sit and have watched you do that work and turn into a completely clean ass swap!!!! You guys are some awesome mechanics. Did the wreck happen the same night you finished the build?????? ........oh and P.S. would you guys build.my ek hatch for me when I'm financially ready????????

  • @PurplDanq
    @PurplDanq 6 ปีที่แล้ว

    Man y'all knock this shit out the park

  • @mierulmingming8399
    @mierulmingming8399 7 ปีที่แล้ว

    At the end makes me cry. 😭