for the Iris, you can also use different colored threads and a similar method to how you made the blood vessels, and build up the structure. its how glass eyes are made
Me and my friend were watching the video and I was like that's so cool and he was like why are there no brown eyes? Most people have brown eyes you know, this is bullcrap. There is your answer
Goodness, it's not a very logical tutorial, definitely not a step by step video and if you don't know how to do something like this the video will make absolutely no sense, quite a jumbled mess actually. Also his accent and use of British jargon makes it even worse. He does make a nice eye in the end however, but is not a very good tutorial
Marvelous! Here is a simple no-cost way to reduce the number of bubbles: Mix your silicone as usual. When you fill your container, place it on the floor. Pour from table height with the skinniest stream possible. It's like magic! Need to be careful that you don't entrain more air at the point where the resin starts filling the container.
TL/DR - Use the gray eyeball in this video as the mold eyeball. I'm a pretty smart guy, I'll admit it. But even I was confused on the process. I went back and discovered that the main eyeball (gray) you worked on already had the iris in there and was the completed shape. When you made your mold you used that eyeball and not the ones without the iris. Seems logical now but it wasn't until I dug into the video a few times. I'd also like to think this would be great to do in resin. I believe that I will be doing mine in resin. Amazing job!!! I can't thank you enough for sharing all of this with us!
Fun fact: the red thread technique is evidently the same one used for professionally-made glass eyes for humans! Anyway this was super cool and I'm glad YT popped it up in my recommended vids - thanks so much for sharing!
Another trick to reduce the bubbles is to pour the silicone in a thin stream. The thin stream breaks the bubbles as they pour. Thanks for making this video. I've been thinking about trying to make some eyes myself.
Vacuum chamber would be good, but you can actually do reasonably well with pressure, and it's much cheaper/more accessible. All you need is a strong sealed container, a schrader valve from an old bike inner tube, and a bike pump. This approach is no good for big parts, since the chamber needs to be big and it's way too much pumping, but eyes are small, it should be easy. You only need like 60 psi for pressure casting, which is not too hard to contain.
Wow your eyes are beautiful! Idk about yours but the ones you make look awesome haha Gladly hit the sub and bell! Keep up the great work I’ll be looking forward to more.
I made my own eyes out of porcelain. Doll and puppets have great mechanical eyes. Historically eyes are glass and costly. The one I made could be customized. You had many steps to complete -glazing and China painting the eyes. This is great as it opens up a process for many people who want to make their own, yet don’t have a kiln and pottery skills. This is a very nice presentation!
Oh nice find! Going to print these on the resin printer, bet the eyes will come out really smooth. No idea what I need eyes for, but I know I need them :) Thanks!!
These are incredible, I think for me, heat is the most effective way of removing bubbles from clear resin but slow mixing with a round stick like a skewer, rather than a flat object like a popsicle stick helps to not introduce them in the first place
I was working on eye's to pla arround with movement. But creating an eyeball was something I got stuck on and this wel this solves everything! :D They just look insane! I love it!
I don’t think I’ll ever make an eye but they look great 👍🏻 For ultimate realism a way to change the pupil size would be fantastic. Thanks for sharing 👍🏼
Been wanting to create an eye mechanism for a mask/ university project of mine like these, only issue is that I need the iris to glow yellow, these eye mechanism videos have been very inspiring 👍✨
Great series! I'm looking forward to more! I controlled 9 PIDs (for my gigantic robot hand on my channel) with an Arduino, so I bet a nano could handle a bunch of these!
Excellent video and excellent work! I’d really love to experiment with your eye mech but I don’t have a 3D printer! All of my eyes are static I’m not so keen on using cotton thread. I like to pour clear epoxy over the top of the eye so that it appears to have a clear gelatinous membrane and when you use thread, the pour backs up and makes it uneven. Instead I’ve started using red and blue flocking for the microscopic capillaries which is mixed in with my epoxy that I use for the main body of the eye. The clear epoxy is mixed with a tiny amount of white acrylic paint and the end result is a translucent effect. To get the appearance of many of these capillaries together like at the back of the eye, I use a seperate concentrated mix of flocking which I mix into the mould around the back circumference with a cocktail stick. After that I paint on larger veins with a detail brush. Your perception joins the tiny capillaries to the larger veins even though there is nothing there to join them up.
Hate to necropost but human eyes range from 21 mm to 27 mm. You can print an eye to be that size, smaller, bigger. It's up to you. The eye in the download is about 30mm.
Using Acetone will smooth it to the point that it’ll look melted and gloopy. Why not print them on a resin printer like the Elegoo Mars and then use translucent resin? It will be incredibly smooth right away.
lot of bubbles in the iris of the eye. Alternatively, you can use fimo clay in the iris and and make the grooves of the iris with an exacto knife. then you can paint it then put the resin over it. you don't need to put the clay in the oven.
You should try a pressure pot for your resin. There's a channel (Rybonator) that does a lot of resin dice and he has a video about why a pressure pot is better to use than a vacuum chamber. These are fantastic, I'd just love to see those bubbles fixed up. :)
One more realism detail. The human cornea isn't a section of a sphere congruent with the spherical shape of the eyeball. It's slightly protruding above the eyeball sphere. Should be easy to replicate with a modification to the master model you made without the iris recess and a new silicone mold.
Hey WIll, just wondering what is the progress on the mechanical part of this project? I am really keen to make it was just wondering when that would be coming out. Waiting for the second one (the middle version). Love what you do man keep it up
Thanks for the video!! I'm building and modeling a skeksis-head, more specifically the chamberlain's, your video will help me to continue working on it. Can you make vlt a video with a simple blinking mechanism, that would be awesome
This is so cool! Why didn't I think of it before? Just one thing. My 3D software tells me these eyes are 32mm. Wouldn't realistic human eyes be closer to 28mm? Even with the sanding they won't get that smaller. I guess one can scale everything down a little.
Nice job Will Cogley, Although this process is almost identical to the video posted by John Cherevka on Stan Winston's school. maybe a shout out to him and the school would have been nice. Just saying giving credit where credit is due
I haven't seen that video before but you're right it does look similar. I designed my eyes around a snap-fitting system I made for my animatronic mechanism, so I would have a way to cast a dome over the pupils and easily connect to my mechanism with the same fitting.
Hey, Ill buy a few of these depending on the price. I love the idea of a small bot with these eyes that just follow you as you walk around a room. Send me a message and let me know if this is an option
I've noticed on your stl file for the eyeball it shows as a complete round eye with no "cup" for the iris, has there been an update for this....fantastic work and looking forward to building this...
for the Iris, you can also use different colored threads and a similar method to how you made the blood vessels, and build up the structure. its how glass eyes are made
Why would anyone not like this? Awesome job!
Me and my friend were watching the video and I was like that's so cool and he was like why are there no brown eyes? Most people have brown eyes you know, this is bullcrap.
There is your answer
Goodness, it's not a very logical tutorial, definitely not a step by step video and if you don't know how to do something like this the video will make absolutely no sense, quite a jumbled mess actually. Also his accent and use of British jargon makes it even worse. He does make a nice eye in the end however, but is not a very good tutorial
I would definitely ask for a refund.
Evil Bob, 27 people apaently
@@EricStrebel It's perfectly fine as long as you have an IQ above 80. Do you need your hand held when you go wee-wee, too?
So you're the eye guy from bladerunner huh? "I just do eyes!".
Great video and the voiceover is fantastic! A clear, very relaxed, and thorough explanation of everything involved. Thanks very much.
Beautiful technique. So glad TH-cam suggested this video on my home page or I would never have found your channel.
Marvelous!
Here is a simple no-cost way to reduce the number of bubbles: Mix your silicone as usual. When you fill your container, place it on the floor. Pour from table height with the skinniest stream possible. It's like magic! Need to be careful that you don't entrain more air at the point where the resin starts filling the container.
I’m not even using a 3D printer, but instead doing this by hand, yet your video helped me make a more realistic eye. Thank you, good video!
TL/DR - Use the gray eyeball in this video as the mold eyeball.
I'm a pretty smart guy, I'll admit it. But even I was confused on the process. I went back and discovered that the main eyeball (gray) you worked on already had the iris in there and was the completed shape. When you made your mold you used that eyeball and not the ones without the iris. Seems logical now but it wasn't until I dug into the video a few times.
I'd also like to think this would be great to do in resin. I believe that I will be doing mine in resin.
Amazing job!!! I can't thank you enough for sharing all of this with us!
Beautiful work there, definitely going to try making some of these
Fun fact: the red thread technique is evidently the same one used for professionally-made glass eyes for humans!
Anyway this was super cool and I'm glad YT popped it up in my recommended vids - thanks so much for sharing!
Great job, thanks for sharing your process! Your mechanisms also look great, I appreciate that you release this openly
Another trick to reduce the bubbles is to pour the silicone in a thin stream. The thin stream breaks the bubbles as they pour.
Thanks for making this video. I've been thinking about trying to make some eyes myself.
The thin stream method should also help with the clear acrylic too.
Thanks again for sharing your work. Those eyes look great!
I work with silicone casting occasionally and found that refrigerating the cast helps draw the bubbles out, no idea if it would work with the resin
Vacuum chamber would be good, but you can actually do reasonably well with pressure, and it's much cheaper/more accessible. All you need is a strong sealed container, a schrader valve from an old bike inner tube, and a bike pump. This approach is no good for big parts, since the chamber needs to be big and it's way too much pumping, but eyes are small, it should be easy. You only need like 60 psi for pressure casting, which is not too hard to contain.
Love how realistic they look when blinking. And the cotton thread for veins was great - I'll have to use that!
Wow your eyes are beautiful! Idk about yours but the ones you make look awesome haha
Gladly hit the sub and bell!
Keep up the great work I’ll be looking forward to more.
You can use a blow torch on low settings or mayby just a lighter to remove the bubbles, works great
this is scary. I love it! Imagine putting a camera inside that eyeball as well.
Brother, you are going places! What a terrific 👁 for detail you have. 🧐
I made my own eyes out of porcelain. Doll and puppets have great mechanical eyes. Historically eyes are glass and costly. The one I made could be customized. You had many steps to complete -glazing and China painting the eyes. This is great as it opens up a process for many people who want to make their own, yet don’t have a kiln and pottery skills. This is a very nice presentation!
Oh nice find! Going to print these on the resin printer, bet the eyes will come out really smooth. No idea what I need eyes for, but I know I need them :) Thanks!!
These are incredible, I think for me, heat is the most effective way of removing bubbles from clear resin but slow mixing with a round stick like a skewer, rather than a flat object like a popsicle stick helps to not introduce them in the first place
A round stick makes sense actually, thanks for the tip.
These eyes are really beautifull. I love it!
Amazing work... And yeah you need a vacuum chamber.
But honestly impressive stuff...
Awesome! hope u will release the stl files for the Eye Mechanism soon... im so ready to print it!! :)
I was working on eye's to pla arround with movement. But creating an eyeball was something I got stuck on and this wel this solves everything! :D They just look insane! I love it!
I don’t think I’ll ever make an eye but they look great 👍🏻 For ultimate realism a way to change the pupil size would be fantastic. Thanks for sharing 👍🏼
Been wanting to create an eye mechanism for a mask/ university project of mine like these, only issue is that I need the iris to glow yellow, these eye mechanism videos have been very inspiring 👍✨
Wow - that’s amazing!! Nice work!!
4:27 Setting a timestamp for myself, since it's 3AM and I can't stay awake.
So far, the video looks amazing, and I can't wait to finish it tomorrow!
Wow, these are stunning!
right?
Now i wanna build a creepy doorbell 👀👍
Thats super cool
Great series! I'm looking forward to more! I controlled 9 PIDs (for my gigantic robot hand on my channel) with an Arduino, so I bet a nano could handle a bunch of these!
I've just started following this procedure, using resin printed eyeballs. Elegoo ABS white seems to come out a nice off-white colour.
Really nice process! Thanks for sharing
Thanks a lot for the video, i wondered how did you managed to make the eye so realistic, now I know 😀
Looks awesome! If you do the resin bit in a small homemade vacuum chamber you might be able to pull more of the bubbles out.
I'm not exactly making any of these but this is really cool, looking forward for the mechanism
Impressive paint work!!!
Best Tutorial i have seen all year! So creative and thanks very much! Look forward to more, have a great day mate.
great instructions. and the eyes look amazing
Amazing, you are very talented.
This is interesting!!!! 💖💖 Can't wait for the mechanism!! 💕
Thanks, it's obvious you put a lot of thought and elbow grease into both the eye system and your video. Happy 2020..
Wonderfully done, Will.
this is a very well put together vid
With ABS you can use vapor smoothing for the eyes.
Well these are awesome they look so real
Well done , truely inspiring
“The T-600s has rubber skin, be spotted them easy. But these are new. They look human!”
- Kyle Reese.
Amazing Job! The thread is a great idea for random effect. 🤔 I want to incorporate LEDs some how.
Great techniques mate. Nice one 👍
Exactly the Video i was looking for! Thank you mate
Really nice eyes, looks like you are in need of a pressure pot to get all the bubbles out.
Building a vacuum chamber is a must if you want more quality.
Very cool stuff!
Thanks Will! I was looking forward to this coming out. I like your universal design for the snap fit. Great work on this!
Thank you very much for this series. 😎
Excellent work!
Excellent video and excellent work! I’d really love to experiment with your eye mech but I don’t have a 3D printer! All of my eyes are static
I’m not so keen on using cotton thread. I like to pour clear epoxy over the top of the eye so that it appears to have a clear gelatinous membrane and when you use thread, the pour backs up and makes it uneven. Instead I’ve started using red and blue flocking for the microscopic capillaries which is mixed in with my epoxy that I use for the main body of the eye. The clear epoxy is mixed with a tiny amount of white acrylic paint and the end result is a translucent effect. To get the appearance of many of these capillaries together like at the back of the eye, I use a seperate concentrated mix of flocking which I mix into the mould around the back circumference with a cocktail stick. After that I paint on larger veins with a detail brush. Your perception joins the tiny capillaries to the larger veins even though there is nothing there to join them up.
Beautiful work!
Now I know why I always felt ABS was prettier, the subsurf scattering
*subsurface
This is amazing
I'd love to see what you could do with a resin 3D printer . Amazing work . I look forward to more videos.
👁 think you did a great job. Great technics 👍🏽😊
Great job! Thanks for sharing.
NICE JOB !
Absolute cool Will , Nice Video Thx .
love your work! you inspires me! please keep doing it :)
Youu aree brilliantttt😍😍😍
Great video.
This is wonderful stuff can't wait to see more. What size are the eyes compared to human eyes?
Keep up the Great work.
Hate to necropost but human eyes range from 21 mm to 27 mm. You can print an eye to be that size, smaller, bigger. It's up to you. The eye in the download is about 30mm.
Just wondering, since you are using ABS, why not use Acetone for vapor smoothing? just curious if you considered it over sanding the eyes?
That's a really good idea actually, I'll have to try that next time I make some 👍
Using Acetone will smooth it to the point that it’ll look melted and gloopy. Why not print them on a resin printer like the Elegoo Mars and then use translucent resin? It will be incredibly smooth right away.
Don´t leave it to long in the acetone vapor it yould deform your part. It happend to my Yoda bust his ears where hanging down. XD
awesome video
Best would be ABS of ASA filament and use vapor smoothing to give it a nice smooth and glossy surface.
Great work! Looks a bit scary to.
lot of bubbles in the iris of the eye. Alternatively, you can use fimo clay in the iris and and make the grooves of the iris with an exacto knife. then you can paint it then put the resin over it. you don't need to put the clay in the oven.
Maaan! I love this !!
You deserve 100K subs!!
Nice work
instead of superglue, you can use an acrylic matte medium (liquitex) to "glue" capillaries to the bulb.
nice work fellow yorkshireman
Amazing Work you are Really Great ❤️🙏❤️
they look very good but do they move?
Amazing job
Finally! I couldn't find how you did your eyes on this channel, I was worried you wouldn't share with us.
Thank you!
It's just awesome
You should try a pressure pot for your resin. There's a channel (Rybonator) that does a lot of resin dice and he has a video about why a pressure pot is better to use than a vacuum chamber. These are fantastic, I'd just love to see those bubbles fixed up. :)
One more realism detail. The human cornea isn't a section of a sphere congruent with the spherical shape of the eyeball. It's slightly protruding above the eyeball sphere. Should be easy to replicate with a modification to the master model you made without the iris recess and a new silicone mold.
awesome!
Eye , eye, lovin it a look up 😜🗣️🙏💪💯💯🇬🇧
Now you need to work on latex over a mannequin head so you can have realistic eyelids and mouth for animatronic jaw.
nice man
Hey WIll, just wondering what is the progress on the mechanical part of this project? I am really keen to make it was just wondering when that would be coming out. Waiting for the second one (the middle version). Love what you do man keep it up
I would use UV resin. You have complete control over any air bubbles that are there before you uv it to cured.
Thanks !
Thanks for the video!! I'm building and modeling a skeksis-head, more specifically the chamberlain's, your video will help me to continue working on it. Can you make vlt a video with a simple blinking mechanism, that would be awesome
This is so cool! Why didn't I think of it before? Just one thing. My 3D software tells me these eyes are 32mm. Wouldn't realistic human eyes be closer to 28mm? Even with the sanding they won't get that smaller. I guess one can scale everything down a little.
Can we build some option for camera aperture assuming the eyes to see the surrounding through a camera sensor?
Nice job Will Cogley,
Although this process is almost identical to the video posted by John Cherevka on Stan Winston's school. maybe a shout out to him and the school would have been nice.
Just saying giving credit where credit is due
I haven't seen that video before but you're right it does look similar. I designed my eyes around a snap-fitting system I made for my animatronic mechanism, so I would have a way to cast a dome over the pupils and easily connect to my mechanism with the same fitting.
Hey, Ill buy a few of these depending on the price. I love the idea of a small bot with these eyes that just follow you as you walk around a room. Send me a message and let me know if this is an option
I've noticed on your stl file for the
eyeball it shows as a complete round eye with no "cup" for the iris, has there been an update for this....fantastic work and looking forward to building this...
Those are blanks for making the mold. Look in the "Eye Casting Kit" folder from the download package and you will find the eyes with cups stl file.
Abyss Creations / Realdoll should
hire or buy those eyes from you