Just found your channel, please make more videos ! Enjoy watching them. I Hope to get better at this leather crafting work and come out as smooth as yours
Bro this is so good love the clean look of you’re bench Cool idea with getting your logo in the same spot I need so many of you’re tools thanks for you’re time in posting this up I’m kinda new to the game loving the tips and skills you share Happy new year man!
Awesome job! I liked watching you leave extra to trim off towards the end so that all of the edges line up nice and clean! I think I spend more time trying to get my edges even and smooth than I do on any other part of my projects
Haha I always feel like the hammer scenes are going to startle people. Im glad to hear its your favorite. The sounds my be my favorite part of these vids
Beautiful and so precise!! 😍 And wow... you have the patience of Job, as they say!! (Whoever “they” is.) Thanks for sharing the process... it has helped me decide which one to purchase. 🙏🏼💕
Aah thank you so much! I cant wait to make you one of these! And you can always refer back to this and the Crossbody Bag making videos to watch how they were made again! Thanks a ton!
I so much wonder if the creaser you are using at 5:50 can be heated like the regular double tongue ones. Any one's tip can be an immense help. Great video by the way :)
Et pas seulement les mains je dirais 😋 mais bon, il faut pas tourner les commentaires à une place où une horde de femmes se mettent d'accord à ce sujet 😄😏
good night. on which website did you buy this chisel, which makes the hole for sewing? You can tell me the place or website where I can buy. Congratulations on the job, simple and perfect.
Dad gum. Whoa, whoa. What is your logo applied to at 7:38???!!! And do you have to sharpen your corner rounders much? Okay last thing. I can totally relate to the careful application of tokenole. It’s delicate. Okay, and your video game is on fire. 💪
Hahaha your comments are money. Ive never had to sharpen my corner punch, and ive used it for like 2 years! Tokonole can be the best and worst thing ever invented. You definitely have to be suuuuper careful. And for the logo application, do you mean the press I use?
What's the stuff you put on with the dauber before you sand & before the tokinole? Also what's the edge beveler you're using? I'm using a Tandy/craftool number 2 - cuts way too much imo. Strange that's the size almost everyone recommends. I appreciate your time!
Hey! Thats just water to wet down the fibers in one direction. As for the beveler, I would recommend the Craftool Fine Beveler. It shaves off almost the exact same as the size 0 Palosanto
Hey! They are just some cheap arc shaped punches. Here’s the link: Co-link DIY Leather Craft Belt Strap Wallet Bag End Arc-shaped Punch with 5 Sizes www.amazon.com/dp/B00OIGSPCW/ref=cm_sw_r_cp_api_i_UtAvDbZGRSWQX
Not normally with wallets but if I make a bag or something that won’t be absorbing hand oil as often I’ll use some Smiths Leather Balm every 6ish months
Hey! I recently redesigned this model on my website however if you want this exact wallet shoot me an email at lowtideleather@gmail.com and I'll get one made for you. Thanks!
Just found your channel, please make more videos ! Enjoy watching them. I Hope to get better at this leather crafting work and come out as smooth as yours
I appreciate that! Definitely motivates me to keep the content rolling. Thanks for watching 🙏🏻
Adorable videos nice very intelligent boss thanks for the free coaching bless you more from Nigeria.
Bro this is so good love the clean look of you’re bench
Cool idea with getting your logo in the same spot
I need so many of you’re tools thanks for you’re time in posting this up I’m kinda new to the game loving the tips and skills you share
Happy new year man!
Love the design! Gotta try this one out
Awesome job! I liked watching you leave extra to trim off towards the end so that all of the edges line up nice and clean! I think I spend more time trying to get my edges even and smooth than I do on any other part of my projects
Love that you’ve made the audio an important part of the vid, don’t know why I love the hammer so much, but 🤷🏼♀️. Great project!
Haha I always feel like the hammer scenes are going to startle people. Im glad to hear its your favorite. The sounds my be my favorite part of these vids
Nice work! Thanks for sharing your talents.
This is so satisfying to watch and listen to. It would be great to see an Apple watch cuff video in the future. 😍
I just rewatched this so much work filming and editing has gone in to this if you did all this as well while making this ....bro respect ✊
Nice job on the curves. I usually mess those up and abandon the project.
Absolutely beautiful work man !
Thanks dude I appreciate it!
You do good leather work
Delicious work! I cant stop watching...
Delicious. Thats the description ive been looking for. Haha. Thank you for watching! I appreciate it
Pure art at the hands of greatness
Beautiful and so precise!! 😍 And wow... you have the patience of Job, as they say!! (Whoever “they” is.)
Thanks for sharing the process... it has helped me decide which one to purchase. 🙏🏼💕
Aah thank you so much! I cant wait to make you one of these! And you can always refer back to this and the Crossbody Bag making videos to watch how they were made again! Thanks a ton!
Yess!!! Really excited!! Thanks again.
Very good work I. M learning a lot from U thank U
Aah I appreciate that. Thanks for watching!
My good man how do you make the corner do you have the punch with the 2 tubes go in peace
Clean, smooth, thanks for sharing
I so much wonder if the creaser you are using at 5:50 can be heated like the regular double tongue ones. Any one's tip can be an immense help.
Great video by the way :)
A work of art, good skills 😎👍🏻
Thanks so much! I appreciate that
Always here to support my guy
Means everything my dude 🙌🏻
Wow great clean work, I am have just started working with leather, I just wanted to find out how many mm is the chisel you use for punching holes?
Bonjour,
Quels beaux gestes pour un très beau rendu !
De très belles mains aussi 😊
Et pas seulement les mains je dirais 😋 mais bon, il faut pas tourner les commentaires à une place où une horde de femmes se mettent d'accord à ce sujet 😄😏
Awesome craftsmanship.. what is the thickness of the leather that you used on this..
Very nice work
Thank you! I appreciate it!
What kind of glue is that? I like that it comes with a brush attached
Rubber cement
Very nice sound , which micro do you use , are you use recorder ?
good night. on which website did you buy this chisel, which makes the hole for sewing? You can tell me the place or website where I can buy. Congratulations on the job, simple and perfect.
Looks great
Thanks Robert!
Nice work setup man. Would you mind sharing what sanding wheel and speed you used on the dremel?
Shmmooothhhh
Hot butter baby
Subscribed both of you. Good job
Hi ryan
Beautiful work. Have you looked into getting into EDC pocket organizers?
Thank you! I have done a few before but only by custom request. They’re fun little things to make 👌🏻
Would like to know where you got the hole punch, not off Amazon cause I an't seen one like it before now.
Hey, are you referring to the stitching hole punch or the other single punch?
@@LowTideLeather the punch with the hole tubes,
@@LowTideLeather the hole punch that is got replaceable hole tubes
Thanks man for this 😘. Before tokonole, was it water?
Nice "watch and learn" video! :) I only wished you had dyed it too! Just a simple question, what size of sandpaper did you use for the edges?
Thanks for watching! My dying skills are a joke so be glad you didn’t see that. I use 800 and 1000 👌🏻
@@LowTideLeather Haha, I'm glad too then. ^^ Thanks!!
Can you leave a link for your stitch punch?
I watched this video twice. TWICE!
Daaang son that’s like 5x my attention span 👏🏻👏🏻
perfeita. parabéns! 👏👏👏👏👏👏👏👏👏👏
Gracias!
What kind of thread do you use, and size. Awsome work.
Thank you! I use Maine thread size .040
@@LowTideLeather think you for your response.
I forgot to ask you another question.
Do wax your thread, before sewing?
what size hole and spacing do you use with your punches from Sina Broks?
Masallah mind blowing my dear brother 💐🇮🇳💐
Thank you my friend!
Perfectly!👌👌👌
Thanks so much!
What size edge beveler are you using ? Thanks in advance
Dad gum.
Whoa, whoa. What is your logo applied to at 7:38???!!!
And do you have to sharpen your corner rounders much?
Okay last thing. I can totally relate to the careful application of tokenole. It’s delicate.
Okay, and your video game is on fire. 💪
Hahaha your comments are money. Ive never had to sharpen my corner punch, and ive used it for like 2 years! Tokonole can be the best and worst thing ever invented. You definitely have to be suuuuper careful. And for the logo application, do you mean the press I use?
Yeah, is that just something you have resting on your press, or…?
Yea the brass stamp is too slim for the press to reach so I raise the leather with a bench block. Does that make sense?
Great craftsmanship and video as always. What you applied on edges before sanding?
Thank you! I use water to wet down the fibers in one direction and then Tokonole for the disgusting gloss
Very cool!
Thanks so much!!
Amazing
Thanks so much!
What's the stuff you put on with the dauber before you sand & before the tokinole? Also what's the edge beveler you're using? I'm using a Tandy/craftool number 2 - cuts way too much imo. Strange that's the size almost everyone recommends. I appreciate your time!
Edge Beveler Palosanto size 0 - Found it. Holy expensive, haha
Hey! Thats just water to wet down the fibers in one direction. As for the beveler, I would recommend the Craftool Fine Beveler. It shaves off almost the exact same as the size 0 Palosanto
Hey there, may I ask where you got that punch from you use at around 01:00?
Hey! They are just some cheap arc shaped punches. Here’s the link:
Co-link DIY Leather Craft Belt Strap Wallet Bag End Arc-shaped Punch with 5 Sizes www.amazon.com/dp/B00OIGSPCW/ref=cm_sw_r_cp_api_i_UtAvDbZGRSWQX
Do you mainly use 0,40 size thread ( i guess 1mm eu size ) when you use 1.5/6mm punches ?
Thats all correct!
May I ask, what is the benefit for the round punch that you use over the diamond chisel one? Or It's just your own prefer?
It's mostly a preference of appearance. However I've found the saddle stitching to be considerably easier with the round punch
Very clean work! What size (mm) edge beveler do you use?
Thank you! Im actually not sure how many mm the bevel is but its size 0 from Palosanto
Very nice.
Thank you!
What is the diameter of the punch teeth?
What material did you strop the knife with?
What kind of leather did you use to make this?
Which thickness of leather are you use?1.0mm or 1.2mm?
I use between 1.2mm and 1.4mm. Hope that helps!
How much is this tools
Amazing job man!! Quick question if you don’t mind, what did you put on the leather before you stamped your logo?
Ask away! That right there is my super secret ingredient of water. I just use water to wet the area of the logo so the stamp is way more detailed
@@LowTideLeather that's what I thought! Damn I wish I could get my hand on that super secret ingredient!
Wondering what pricking irons you’re using and the size. Thank.
Hey! I use Sinabroks 1.5mm x 6mm stitching punch
Low Tide Leather I have the same punches and I use a 1mm Ritza poly thread with them, but your stitching looks a lot better than mine.
What edge beveller are you using, works really smooth compared to my one
This is a Palosanto size 0. Best beveler I’ve ever used! Pricier, but worth it
You get what you pay for with tools and anything
@@LowTideLeather
0 - is 0.3mm
1- is 0.6mm
2 - is 0.9mm
3 - is 1.2 mm
How to you make your acrylic templates?
I had them custom made by Make Supply. I highly recommend them!
I
Template from make supply are very good i used them
price on this is?
Do you treat in any way to prevent water damage?
Not normally with wallets but if I make a bag or something that won’t be absorbing hand oil as often I’ll use some Smiths Leather Balm every 6ish months
@@LowTideLeather Awesome thanks!
Post more videos bro
Hallo, im from indonesia, i wanna ask some question, what size the beveler do you use??????
I use a size 1 Palosanto
Hello my friend, what is the name of the device he uses to smooth the pieces?
If youre referring to the tool that smooths the edges, that would be a wood burnisher!
What kind of mats are you using?
That’s that Dahle Vantage boii
すごい！やってみたい！
Can I buy the pattern for this ?
Hey! Ill hopefully be able to create some patterns in the near future.
What is the price?
These are $95 my friend
Where can I buy this🥺
Hey! I have everything on my website at lowtideleather.com
Where can i buy this wallet?
Hey! I recently redesigned this model on my website however if you want this exact wallet shoot me an email at lowtideleather@gmail.com and I'll get one made for you. Thanks!
Mujha ek chahiye
HowThin leather ?
This one is 3 oz veg tan
Butter.
And biscuits?
Low Tide Leather now I am going to have to make biscuits and country gravy. 🤤
Hellow bro... How are you?
Brother i want this.please make this for me .
Plz.
Plz.
Plz.
خدمة كبيرة 😳😳😳😳
👍
Thanks Alex!
"ASMR" 2:45
Perfeito
I appreciate it!
💗💗😍😍😘👍
Thank you!
🤩
Thank you!
👌👍👍👍👍👍👍100%
Woot woot!
bravo bogosse ;)
Thanks a ton!
한국에 있는 철자 선물 해주고 싶어요. 플라스틱 자 ㅋ
Show!!!
Show!
Atleast fold the damn thing
Haha Ill get the fold scene on the next one
You're weird as hell if this gets your asmr going.
Very well done video.
Show!!!